Volume 162 · 2020 · 13 ARTICLES
All Articles In This Issue
01
Indexed In · Volume 162 / 2020
Characterization of iron ore and scale for synthesizing vinyl paint
Authors: ABSTRACTTwo materials are studied to synthesize a vinyl painting. Iron ore is an iron pigment with an oolithic structure containing phosphorus. The second material is a steel by-product. The raw materials proprieties were studied by chemical, particle size, thermal, XRD and spectrophotometric analysis. The iron contents of the pigment and scale are respectively 53.18% and 73.83%. The grindability of scale is better than that of the pigment. The particle volume distribution is 0.7 to 32 µm for scale and 0.6 to 40 µm for pigment. TGA and DTA tests show that the pigment loses weight with phase dissolution by consuming energy and the scale gains weight with the formation of a new phase when the temperature increases. The SEM of the scale showed a homogeneous structure of iron oxide grains ranging from 1 to 10 μm. XRD analysis shows that the iron in the pigment is in the form of (Fe2O3) and FeO (OH)) and very little (Fe2SiO4). The iron in the scale is in the form of (FeO, Fe2O3 and Fe3O4). Spectrophotometric tests show that the two materials have no absorption and their reflection is maximum (100%) in the visible range.
https://doi.org/10.19111/bulletinofmre.604081
Keywords:
02
Indexed In · Volume 162 / 2020
Estimation of co-seismic land deformation due to Mw 7.3 2017 earthquake in Iran (12 November 2017) using Sentinel-1 DInSAR
Authors: ABSTRACTA strong shaking with Mw 7.3 occurred on 12th November 2017 around the Sarpol-e Zahab town in the border area between Iran and Iraq. It has a number of foreshocks and aftershocks increasing the total deformation, cumulatively. In this study, we have investigated how earth surface deformed after such a strong earthquake and its scatters. Because, the deformation inspection are indispensable for the safety of citizens and infrastructures. The best way for monitoring of surface deformation in such a big event is the SAR technique. This system can work effectively during night and day under different weather conditions. The Interferometric SAR (InSAR) allows accurate measurements of surface deformation in mm resolution. There are several methods for the application of SAR techniques and one of them is Differential InSAR (DInSAR) indicating an uplift and subsidence around epicentral area precisely. We preferred to use it for sensitive vertical displacement in the target area. The seismological data from the observatory centers indicate that the recent earthquake sourced from the NW-SE trending, northeast dipping High Zagros Reverse Fault Zone. According to the results, epicentral area has been exposed a vertical displacement with 90 cm uplift and -41 cm subsidence in the northeastern and southwestern block of the fault, respectively.
https://doi.org/10.19111/bulletinofmre.604026
Keywords:
03
Indexed In · Volume 162 / 2020
Neogene stratigraphy and regional correlation of the Çeşme Peninsula, Western Anatolia, Turkey
Authors: ABSTRACTThis study aims to investigate the stratigraphy and regional correlation of terrestrial Neogene sediments and volcanics in the Çeşme Peninsula. Neogene deposition is represented by two main sedimentary successions separated from each other by an angular unconformity. The lacustrine dominated Çeşme group characterized the Lower-Middle Miocene deposition is formed by Şifne, Ovacık and Çiftlik formations. The felsic pyroclastics (Alaçatı pyroclastics), which are the early products of the Armağandağı volcanism, laterally associated with the Çeşme group deposition, deposited on the Şifne formation and interrupted the lacustrine sedimentation. The lacustrine sedimentation continued uninterruptedly with Ovacık and Çiftlik formations after the deposition of pyroclastics, which terminated the sedimentation of the Şifne formation. The calc-alkaline Armağandağı volcanism is composed of felsic pyroclastics, andesitic volcaniclastics (Reisdere volcaniclastics) and lavas (Zeytineli lava) respectively from bottom to top. The Late Miocene-Early (?) Pliocene Kaştepe group, which covers all these units with angular unconformity, is represented by a succession, which grades from alluvial fan (Karagöz formation) up to lacustrine deposits (İnlice formation).
https://doi.org/10.19111/bulletinofmre.581658
Keywords:
04
Indexed In · Volume 162 / 2020
Geochemical characteristics of the Eocene Karataş volcanics (Northeast Sivas, Turkey) in the İzmir-Ankara-Erzincan Suture Zone
Authors: ABSTRACTKarataş volcanics, is the product of Eocene volcanics crop out in the form of two belts along the northern and southern boundaries of the İzmir-Ankara-Erzincan Suture Zone. According to geochemical data, these volcanics have alkaline basic-intermediate character and consist of basaltic trachyandesite, trachyandesite and trachyte. This volcanic activity has been controlled by fractional crystallization and crustal contamination from basaltic trachyandesite to trachyte. Orientation of the samples towards amphibole area on the Rb/Sr - Ba/Rb ratio diagrams, dispersion of the Zr/Ba ratios (0.08 - 0.33) in the lithospheric mantle range, increase in the Ba/Rb ratio, decreases in the MgO, Ni and Cr contents point out that this volcanism originated from enriched lithospheric mantle rather than asthenospheric mantle. Geochemical data show that this enriched lithospheric mantle material is upper continental crustal material, main part of enrichment resulted by the subduction related fluids and also the contribution of the sedimentary materials. This situation may be explained that; the melts, derived from N-MORB or OIB bearing material ascended into the continental crust in a pre-collisional period and were reactivated by extensional tectonic and/or delamination processes during the post-collisional period, possibly caused the partial melting within the upper continental crust and produced the Karataş volcanics.
https://doi.org/10.19111/bulletinofmre.669717
Keywords:
05
Indexed In · Volume 162 / 2020
Estimation of the compaction characteristics of soils using the static compaction method
Authors: ABSTRACTGround improvement using mechanical stabilization is commonly applied by performing the standard Proctor compaction test, which requires a significant quantity of soil, usually obtained from open pits. A static compaction test is an alternative laboratory compaction test. Although researchers have shown that the results of miniature size static compaction tests are comparable with that of standard Proctor tests in terms of the maximum dry density and the optimum water content, no attempt has been made to compare the two fundamental properties of the compacted soil: undrained shear strength and hydraulic conductivity. The scope of this investigation was to estimate the level of static compaction energy required to (1) obtain a compaction curve similar to that of the standard Proctor test; (2) reconstruct compacted soils using the standard Proctor and static compaction tests at the optimum water content; and (3) compare the undrained shear strength and hydraulic conductivity of compacted soils. The compacted soils at the predetermined energy level were subjected to hydraulic conductivity tests using the rigid-wall falling-head permeability method. Undrained shear strength tests were performed by employing a high-capacity laboratory vane shear apparatus on compacted samples of both the standard Proctor and static compaction tests. The present investigation revealed that the static compaction test, requiring about only 10% of the soil necessary to perform the standard Proctor method, provides comparable results in regard to hydraulic conductivity and undrained shear strength.
https://doi.org/10.19111/bulletinofmre.603873
Keywords:
06
Indexed In · Volume 162 / 2020
Petrographic-mineralogical examination and diagenetic history of the Paleogene evaporites in Bulanık (Muş), Turkey
Authors: ABSTRACTOligocene aged evaporite formations are observed in shallow sea-sabkha environments that develop in highly restricted conditions from sea in northeastern of the Muş basin. Evaporites are observed as alternated and intercalated with clastics and carbonates that developed under the control of factors such as climate, tectonism, volcanism and diagenesis. Evaporites consist of primary and secondary gypsum and minor anhydrite. In petrographic and minerologic examinations, secondary gypsum textures such as alabastrin, porphyroblastic and satin spar with anhydrite relicts, late diagenetic calcite, bitumen and bioturbation traces were detected. In SEM-EDS studies; celestine crstals, autogenic and detritic clay and quartz grains and euhedral dolomite mineral were observed. As a result of all these studies, the conditions and phases of the evaporites from the sedimentation stage to early diagenesis and late diagenesis processes of the evaporites were illuminated. Secondary gypsum consists of the origin of primary anhydrite and gypsum. From the diagenetic fluids released during the gypsum-anhydrite transformation, the late diagenetic calcite and by the interaction of the ions carried by the hydrothermal solutions to the basin with the groundwater were formed the celestite. Stream activity in the basin was determined by the presence of detritic minerals in gypsum minerals.
https://doi.org/10.19111/bulletinofmre.569619
Keywords:
07
Indexed In · Volume 162 / 2020
Rare earth element contents, geochemistry of soil samples between Burdur and Isparta region and assessment of their origin
Authors: ABSTRACTThis study was carried out in 5 locations between Burdur and Isparta in the inner southern part of Isparta Bend. The study aims to determine the rare earth element (REE) concentrations in the soil samples collected from the field and to interpret the origin of the high concentrations detected. In this context, a total of 104 samples were collected from Canakli Village (19 samples), Cobanisa Village (34 samples), Kuyubasi Village (17 samples), Kuzca Village (17 samples), and Yilanli Village (17 samples) in the study field. The average ∑REE (La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) concentration values of the samples by their locations were determined to be Çobanisa (821.88 ppm) > Yılanlı (723.39 ppm) > Kuzca (692.54 ppm) > Çanaklı (583.46 ppm) > Kuyubaşı (484.04 ppm). The average light rare earth element (LREEs) concentration (such as La 229 ppm, Ce 378 ppm) of the samples collected from all locations is higher than the average rare earth element concentration in the Earth’s crust. According to the Chondrite-normalized Rare Earth Elements diagram, the distributions of the rare earth elements in these 5 locations were determined to be very similar and the high concentrations were considered to occur under similar conditions or originated from similar sources. In this context, based on the idea that Gölcük Volcanism may be the source of high concentrations, the rare earth element concentrations of Gölcük Volcanism in the northwest of the zone were compared to those taken from the study area and the values were found to be consistent with each other.
https://doi.org/10.19111/bulletinofmre.687929
Keywords:
08
Indexed In · Volume 162 / 2020
Mineralogical characteristics of metamorphic massif units outcropping in Göksun, Afşin and Ekinözü (Kahramanmaraş) region
Authors: ABSTRACTThis study aims to investigate and correlate the mineralogical-petrographic characteristics of Metamorphites in Göksun, Afşin and Ekinözü in the Southeast Anatolian Metamorphic Massifs. In this context, the optical microscopy and XRD investigations were performed on several samples. Göksun Metamorphites are constituted by phyllite, calcphyllite, marble and they contain mainly calcite, dolomite, quartz, feldspar, phyllosilicate. KI and b-cell dimension data reflect high anchizone-epizone and medium pressure conditions. Afşin Metamorphites are represented by phyllite, calcphyllite, calcschist, micaschist, amphiboleschist, marble. Phyllosilicates have consisted of illite/mica, IIb chlorite, mixed-layers, smectite. KI and b-cell dimension data correspond to the subgreenschist-greenschist facies conditions. Ekinözü Metamorphites are made of chloriteschist, amphiboleschist, micaschist, micagneiss in lower parts, while calcitic and/or dolomitic marbles are present in the upper parts. Mica is dioctahedral and trioctahedral, whereas chlorite tends to be trioctahedral. Based on mineral associations, Ekinözü Metamorphites belong to amphibolite facies in the lower parts, but the greenschist facies conditions at the upper parts. The coarse-grained biotite, muscovite and chlorite are accompanied by mixed-layers. According to mineral composition and degrees of metamorphism, Göksun and Afşin Metamorphites are similar to the Keban and Malatya Metamorphites; however, Ekinözü Metamorphites to Pütürge Metamorphites. The data show that metamorphics in the western extension of the Southeast Anatolian Metamorphic Massifs have different origin and/or lithologies according to the regions, increasing temperature-pressure conditions from Göksun to Ekinözü and have groups of rock with different geological evolutions.
https://doi.org/10.19111/bulletinofmre.610884
Keywords:
09
Indexed In · Volume 162 / 2020
Determination of structural characteristics of Tuzgölü Fault Zone using gravity and magnetic methods, Central Anatolia
Authors: ABSTRACTThe anomaly maps and amplitude and wavelength changes of the anomalies obtained from gravity and magnetic methods can provide to identify fault traces in the underground. The Tuzgölü Fault Zone (TFZ), the NW-SE striking active fault zone in central Anatolia, includes fault strands that cut the basement and basin deposits. Our magnetic and gravity analysis suggests that Tuzgölü Basin and its surroundings are characterized by distinct depression and ridge areas. Gravity anomaly data show the presence of faults at depths of sea level (0 m), -1000 m, -2000 m, -3000 m, and -4000 m. These faults are mostly normal and reverse faults, as well as the lesser amount of vertical faults (high-angle normal/reverse faults) with NW-SE, N-S, and NE-SW-striking. The normal faults are of the structural development and the deposition of the Tuzgölü Basin units, which occurred late Cretaceous-Middle Eocene and Early Miocene-Quaternary Periods. The reverse faults originated from the result of the regional-scale compressional regime during Middle Eocene-Late Oligocene/ Early Miocene based on the fault dating data from the literature. The active TFZ, including several fault strands, are relatively younger faults in the region that have initiated to develop during faulting events from after Middle Miocene or Early Pliocene.
https://doi.org/10.19111/bulletinofmre.661245
Keywords:
10
Indexed In · Volume 162 / 2020
Emplacement conditions of magma(s) forming Jurassic plutonic rocks in Gümüşhane (Eastern Pontides, Turkey)
Authors: ABSTRACTIn this study, the petrography, mineral chemistry and crystallization conditions were reported for the Alemdar and Işıkdere plutons located in limited areas in the south of the Eastern Pontides. These plutons, which trend mostly in NE-SW directions, were emplaced by cutting the Early- Middle Carboniferous-aged Gümüşhane Granitoid and Early-Middle Jurassic Şenköy formation. Petrographically, the studied plutons are compositionally fine to medium grained quartz-diorite, quartz monzodiorite and tonalite. The rocks in the plutons have granular, poikilitic, monzonitic, graphic and rare porphyritic textures with consist of plagioclase, (An05-92), hornblende (Mg# = 0.52- 0.81), biotite (Mg# = 0.32-0.67), orthoclase, quartz and Fe-Ti oxide. According to thermobarometric calculations, plutons have crystallization temperatures, pressures and oxygen fugacity values ranging from 541°C to 938°C, 0.1 to 4.4 kbar, and -23 to-12, respectively. The estimated water content calculated from amphibole is between 4.4 to 7.8%. It can be concluded that the studied plutons were emplaced at mid to shallow crustal depths (~4-15 km).
https://doi.org/10.19111/bulletinofmre.649808
Keywords:
11
Indexed In · Volume 162 / 2020
Morphological parameters causing landslides: A case study of elevation
Authors: ABSTRACTThe history of landslide susceptibility maps goes back about 50 years. Hazard and risk maps later followed these maps. Inventory maps provide the source of all these. There are different parameters selected specially for each field in the literature as well as parameters selected because they are easy to produce and obtain data. This study tried to research the effect of elevation on landslides by reviewing the literature in detail. The used class ranges and elevation values were reviewed and applied to map sections selected from Turkey. By analyzing the results, the goal was to determine at which elevation ranges landslides occurred. The study tried to investigate the effect of the parameter of elevation using data from the literature. It works to compare the elevation values for map sections selected to compare with the literature. The study comprises two stages. The first step tried to acquire statistical data by researching the data from the literature. The data were investigated in the second stage. For this purpose, close to 1.500 studies prepared between 1967 and 2019 were reviewed. According to the literature, the parameter of was used in analyses because it is easy to produce and is morphologically effective.
https://doi.org/10.19111/bulletinofmre.649758
Keywords:
12
Indexed In · Volume 162 / 2020
Physical modeling the formation of roof collapse zones in Vorkuta coal mines
Authors: ABSTRACTCollapse of the roof during mining is a constant threat to the lives of miners and equipment performance. To predict it, different numerical and physical approaches are used. Physical modeling of the massif region from -951 m to -841 m using equivalent materials were undertaken in this investigation. Various options for mining the Vorkuta coal deposit were considered: mining only the upper industrial seam, mining the lower coal seam as a protective layer to the upper one, and assessing the impact on the collapse zone of the complex structure of the upper coal seam roof while maintaining an upward order of mining. The main results were as follows: calculated collapse zone is approximately 30% larger than theoretical; collapse zone decreased when using mining with lower protective coal seam; the largest collapse zone was observed when pinching the rocks in upward mining order. Therefore, the research has shown the need to adjust the project for a larger methane yield. Further large-scale modeling is needed for understanding the characteristics of the collapse zone.
https://doi.org/10.19111/bulletinofmre.620478
Keywords:
13
Indexed In · Volume 162 / 2020
Characteristic mollusc, larger foraminifera findings and environmental interpretations of the Middle Eocene Kocaçay formation deposits around Ayvalıca (Bayat, Çorum)
Authors: ABSTRACTAlthough the Çankırı-Çorum Basin was studied for various purposes such as geological, stratigraphical, tectonic, coal and oil exploration, studies on fossils are limited. Especially there have not been detailed studies on molluscs and larger foraminifera. The research area is located at the vicinity of Ayvalıca (north of Çankırı-Çorum basin). The Middle Eocene Kocaçay formation, which outcrops in the Çankırı-Çorum Basin, is widespread around Bayat Çorum in the north of the basin, Sulakyurt Kırıkkale in the west, Çiçekdağı Kırşehir in the south and Sungurlu Çorum in the middle of the basin. The formation is composed of conglomerate, carbonated sandstone, limestone and sandy marls and also includes rich larger foraminifera and molluscs. This study mainly focuses on taxonomy and environmental interpretations of Ostrea roncaensis (Partsch in coll. Bayan, 1870) de Gregorio, 1884, Velates perversus (Gmelin, 1791) species from Mollusca and Nummulites beaumonti d’Archiac and Haime, 1853, N. aturicus Joly and Leymerie,1848, N. perforatus (de Montfort, 1808) and Assilina exponens (Sowerby, 1840) species from larger Foraminifera. In addition, considering faunal features from bottom to top Ostrea roncaensis, Velates perversus, Nummulites aturicus and Assilina exponens Abundance Biozones were identified. The age range of the Kocaçay Formation is determined as Lutetian-Bartonian. Lithological and faunal contents indicate that sediments of the Kocaçay formation were deposited within lagoon to nummulitic sets in a shallow marine environment.
https://doi.org/10.19111/bulletinofmre.685461
Keywords:
No articles match your search.