Oligocene aged evaporite formations are observed in shallow sea-sabkha environments that develop in highly restricted conditions from sea in northeastern of the Muş basin. Evaporites are observed as alternated and intercalated with clastics and carbonates that developed under the control of factors such as climate, tectonism, volcanism and diagenesis. Evaporites consist of primary and secondary gypsum and minor anhydrite. In petrographic and minerologic examinations, secondary gypsum textures such as alabastrin, porphyroblastic and satin spar with anhydrite relicts, late diagenetic calcite, bitumen and bioturbation traces were detected. In SEM-EDS studies; celestine crstals, autogenic and detritic clay and quartz grains and euhedral dolomite mineral were observed. As a result of all these studies, the conditions and phases of the evaporites from the sedimentation stage to early diagenesis and late diagenesis processes of the evaporites were illuminated. Secondary gypsum consists of the origin of primary anhydrite and gypsum. From the diagenetic fluids released during the gypsum-anhydrite transformation, the late diagenetic calcite and by the interaction of the ions carried by the hydrothermal solutions to the basin with the groundwater were formed the celestite. Stream activity in the basin was determined by the presence of detritic minerals in gypsum minerals.
The genesis of Mordenite occurrences: Diagenetic and hydrothermal alteration processes of Paleocene volcanics in Ilıca (Yıldızeli), Türkiye
Authors:
Hülya ATEŞ
ABSTRACT
Different geological processes such as weathering, diagenesis in hydrological systems, hydrothermal processes and contact metamorphism have been proposed to explain the genetic relationships of mordenite occurrences. The mineralogical and genetic analyses in this study are essential for identifying alteration minerals and assessing reaction processes. The Yıldızeli region, located south of the İzmir-Ankara-Erzincan suture zone and northeast of the Kırşehir block, is significant for its mineral deposits. This area consists of Paleocene-Miocene volcano-sedimentary units. Analyse results of selected zone mordenite samples from the Paleocene volcanic units that host mordenite mineralization are linked to low-grade metamorphism, particularly associated with zeolite facies (150-300 °C, 1-3 kbar and pH 4-7), following tectonically controlled hydrothermal alteration. The zeolitization process involves interacting fluids crucial for mobilizing alkali elements, with compositional variations in mordenite indicating a continuous evolution toward equilibrium conditions under decreasing temperatures. The progression from mordenite to smectite, along with associated kaolinite occurrences, can be attributed to the hydrothermal circulation of alkaline waters and sodium extraction from underlying evaporites.
Zikrullah Samet GÜLOĞLU, Abdullah KAYGUSUZ, Emre AYDINÇAKIR, Cem YÜCEL
Indexed In · Volume 175 / December 2024
Mineral chemistry, petrography and crystallization conditions of the Middle Eocene Kazıkbeli Pluton (Eastern Pontides, NE Türkiye)
Authors:
Zikrullah Samet GÜLOĞLU, Abdullah KAYGUSUZ, Emre AYDINÇAKIR, Cem YÜCEL
ABSTRACT
The Eastern Pontides host a diverse suite of plutonic rocks spanning a wide range of ages and compositions. Among these, the Middle Eocene Kazıkbeli pluton, located in the Kürtün district of Gümüşhane, stands out due to its distinctive petrological characteristics. This study aims to unravel the petrological implications of petrographic and mineral chemical data to determine the physicochemical conditions (temperature, pressure, oxygen fugacity) under which the Kazıkbeli magma crystallized and was emplaced. By integrating mineral chemical data, we seek to quantify emplacement pressure, crystallization temperature, and oxygen fugacity. A comprehensive understanding of the genetic relationships and physicochemical properties of the Kazıkbeli pluton rocks, as determined through geological, petrographic and mineral chemistry, is crucial for elucidating the geological evolution of the Eastern Pontides. The Kazıkbeli Pluton exhibits a predominant NE-SW orientation and encompasses an area of roughly 46 km². Modal mineralogical analysis reveals a compositional spectrum ranging from gabbroic diorite to monzogranite, with granodiorite and tonalite being the most prominent rock types. Textural variations encompass fineto medium-grained, porphyritic, poikilitic, and occasionally graphic textures. The primary mineral assemblage of the pluton comprises plagioclase, orthoclase, quartz, amphibole, biotite, and Fe-Ti oxides. Accessory minerals include zircon, apatite, sphene, and allanite. Plagioclases are labradorite to oligoclase (An26 to An66) in composition. K-feldspar minerals exhibited an orthoclase composition (Or80 to Or97). All amphiboles belong to the calcic amphibole field and exhibit a magnesio-hornblende (Mg#=0.63-0.73) composition. Biotites crystallized as solidified melt products with compositions between annite and phlogopite endmembers, plotting close to the magnesium-rich (Mg#=0.52- 0.58) end of the phlogopite solid solution series. Calculated crystallization temperatures derived from amphibole and biotite data range from 712°C to 824°C. Pressure estimations calculated using amphibole-plagioclase, amphibole and biotite suggest a range of 0.04 to 2.06 kbar. Oxygen fugacity (ƒO2) values calculated using amphibole and biotite fall between -12.5 and -16.1. Amphibole-based water content estimations indicate a range of 3.7% to 5.7% for the pluton. Biotite compositions within the studied Kazıkbeli pluton rocks exhibit characteristics suggestive of a potential mantle origin. Geobarometric calculations based on mineral chemistry data with geological and petrographic features indicate the emplacement of the Kazıkbeli Pluton at relatively shallow depths within the crust (~1 to 8 km).
Keywords:
Petrography, Mineral Chemistry, Geothermobarometer, Kürtün (NE Türkiye), Eastern Pontides.
Coal quality, mineralogy, petrography, and geochemistry of the high-strontium Bozburun lignite (Malatya, eastern Türkiye)
Authors:
Rıza Görkem OSKAY, Ali İhsan KARAYİĞİT
ABSTRACT
The Bozburun coalfield hosts a late Miocene 1.1 m thick coal seam. This study aims to determine coal quality, mineralogy, petrography and geochemistry, and controlling factors of elemental enrichments. The coals are generally black and greyish black in colour, and the low part of the seam commonly includes fossil shell remains. The ash yield displays a decreasing trend towards the upper part of the seam; in turn, gross calorific and total C values increase upwards. The total S content being generally higher than 5% (on dry basis), displays an increasing trend towards the upper part. In the entire seam, huminite is the most common maceral group, while inertinite and liptinite display variable proportions. The identified minerals by XRD are mainly quartz, clay minerals, calcite, pyrite, and aragonite (in fossil shell remains-bearing samples), whereas feldspars and marcasite determined in a few samples. Furthermore, in the coal samples, celestine and barite were identified
by SEM-EDX. This study indicates that precipitation of celestine and Sr-bearing barite grains during diagenetic stage and Sr-uptake by mollusc within the palaeomire caused Sr enrichment in the entire seam. Overall, the water influx and redox conditions controlled the mineralogical and the elemental compositions of the coal seam.
Morphological parameters causing landslides: A case study of elevation
Authors:
Seda ÇELLEK
ABSTRACT
The history of landslide susceptibility maps goes back about 50 years. Hazard and risk maps later followed these maps. Inventory maps provide the source of all these. There are different parameters selected specially for each field in the literature as well as parameters selected because they are easy to produce and obtain data. This study tried to research the effect of elevation on landslides by reviewing the literature in detail. The used class ranges and elevation values were reviewed and applied to map sections selected from Turkey. By analyzing the results, the goal was to determine at which elevation ranges landslides occurred. The study tried to investigate the effect of the parameter of elevation using data from the literature. It works to compare the elevation values for map sections selected to compare with the literature. The study comprises two stages. The first step tried to acquire statistical data by researching the data from the literature. The data were investigated in the second stage. For this purpose, close to 1.500 studies prepared between 1967 and 2019 were reviewed. According to the literature, the parameter of was used in analyses because it is easy to produce and is morphologically effective.
https://doi.org/10.19111/bulletinofmre.649758
Estimation of co-seismic land deformation due to Mw 7.3 2017 earthquake in Iran (12 November 2017) using Sentinel-1 DInSAR
Authors:
FATMA CANASLAN ÇOMUT, ŞULE GÜRBOĞA, Tayeb SMAIL
ABSTRACT
A strong shaking with Mw 7.3 occurred on 12th November 2017 around the Sarpol-e Zahab town in the border area between Iran and Iraq. It has a number of foreshocks and aftershocks increasing the total deformation, cumulatively. In this study, we have investigated how earth surface deformed after such a strong earthquake and its scatters. Because, the deformation inspection are indispensable for the safety of citizens and infrastructures. The best way for monitoring of surface deformation in such a big event is the SAR technique. This system can work effectively during night and day under different weather conditions. The Interferometric SAR (InSAR) allows accurate measurements of surface deformation in mm resolution. There are several methods for the application of SAR techniques and one of them is Differential InSAR (DInSAR) indicating an uplift and subsidence around epicentral area precisely. We preferred to use it for sensitive vertical displacement in the target area. The seismological data from the observatory centers indicate that the recent earthquake sourced from the NW-SE trending, northeast dipping High Zagros Reverse Fault Zone. According to the results, epicentral area has been exposed a vertical displacement with 90 cm uplift and -41 cm subsidence in the northeastern and southwestern block of the fault, respectively.
https://doi.org/10.19111/bulletinofmre.604026
Keywords:
Interferometry, DInSAR, 12 November 2017 Iran earthquake.
Neogene stratigraphy and regional correlation of the Çeşme Peninsula, Western Anatolia, Turkey
Authors:
Fikret GÖKTAŞ
ABSTRACT
This study aims to investigate the stratigraphy and regional correlation of terrestrial Neogene sediments and volcanics in the Çeşme Peninsula. Neogene deposition is represented by two main sedimentary successions separated from each other by an angular unconformity. The lacustrine dominated Çeşme group characterized the Lower-Middle Miocene deposition is formed by Şifne, Ovacık and Çiftlik formations. The felsic pyroclastics (Alaçatı pyroclastics), which are the early products of the Armağandağı volcanism, laterally associated with the Çeşme group deposition, deposited on the Şifne formation and interrupted the lacustrine sedimentation. The lacustrine sedimentation continued uninterruptedly with Ovacık and Çiftlik formations after the deposition of pyroclastics, which terminated the sedimentation of the Şifne formation. The calc-alkaline Armağandağı volcanism is composed of felsic pyroclastics, andesitic volcaniclastics (Reisdere volcaniclastics) and lavas (Zeytineli lava) respectively from bottom to top. The Late Miocene-Early (?) Pliocene Kaştepe group, which covers all these units with angular unconformity, is represented by a succession, which grades from alluvial fan (Karagöz formation) up to lacustrine deposits (İnlice formation).
https://doi.org/10.19111/bulletinofmre.581658
Keywords:
Western Anatolia, Çeşme Peninsula, Neogene stratigraphy, Neogene volcanism.