Collapse of the roof during mining is a constant threat to the lives of miners and equipment performance. To predict it, different numerical and physical approaches are used. Physical modeling of the massif region from -951 m to -841 m using equivalent materials were undertaken in this investigation. Various options for mining the Vorkuta coal deposit were considered: mining only the upper industrial seam, mining the lower coal seam as a protective layer to the upper one, and assessing the impact on the collapse zone of the complex structure of the upper coal seam roof while maintaining an upward order of mining. The main results were as follows: calculated collapse zone is approximately 30% larger than theoretical; collapse zone decreased when using mining with lower protective coal seam; the largest collapse zone was observed when pinching the rocks in upward mining order. Therefore, the research has shown the need to adjust the project for a larger methane yield. Further large-scale modeling is needed for understanding the characteristics of the collapse zone.
Morphological parameters causing landslides: A case study of elevation
Authors:
Seda ÇELLEK
ABSTRACT
The history of landslide susceptibility maps goes back about 50 years. Hazard and risk maps later followed these maps. Inventory maps provide the source of all these. There are different parameters selected specially for each field in the literature as well as parameters selected because they are easy to produce and obtain data. This study tried to research the effect of elevation on landslides by reviewing the literature in detail. The used class ranges and elevation values were reviewed and applied to map sections selected from Turkey. By analyzing the results, the goal was to determine at which elevation ranges landslides occurred. The study tried to investigate the effect of the parameter of elevation using data from the literature. It works to compare the elevation values for map sections selected to compare with the literature. The study comprises two stages. The first step tried to acquire statistical data by researching the data from the literature. The data were investigated in the second stage. For this purpose, close to 1.500 studies prepared between 1967 and 2019 were reviewed. According to the literature, the parameter of was used in analyses because it is easy to produce and is morphologically effective.
https://doi.org/10.19111/bulletinofmre.649758
Oktay CANBAZ, Ahmet GÖKCE, Taner EKİCİ, Hüseyin YILMAZ
Indexed In · Volume 162 / 2020
Geochemical characteristics of the Eocene Karataş volcanics (Northeast Sivas, Turkey) in the İzmir-Ankara-Erzincan Suture Zone
Authors:
Oktay CANBAZ, Ahmet GÖKCE, Taner EKİCİ, Hüseyin YILMAZ
ABSTRACT
Karataş volcanics, is the product of Eocene volcanics crop out in the form of two belts along the northern and southern boundaries of the İzmir-Ankara-Erzincan Suture Zone. According to geochemical data, these volcanics have alkaline basic-intermediate character and consist of basaltic trachyandesite, trachyandesite and trachyte. This volcanic activity has been controlled by fractional crystallization and crustal contamination from basaltic trachyandesite to trachyte. Orientation of the samples towards amphibole area on the Rb/Sr - Ba/Rb ratio diagrams, dispersion of the Zr/Ba ratios (0.08 - 0.33) in the lithospheric mantle range, increase in the Ba/Rb ratio, decreases in the MgO, Ni and Cr contents point out that this volcanism originated from enriched lithospheric mantle rather than asthenospheric mantle. Geochemical data show that this enriched lithospheric mantle material is upper continental crustal material, main part of enrichment resulted by the subduction related fluids and also the contribution of the sedimentary materials. This situation may be explained that; the melts, derived from N-MORB or OIB bearing material ascended into the continental crust in a pre-collisional period and were reactivated by extensional tectonic and/or delamination processes during the post-collisional period, possibly caused the partial melting within the upper continental crust and produced the Karataş volcanics.
https://doi.org/10.19111/bulletinofmre.669717
Emplacement conditions of magma(s) forming Jurassic plutonic rocks in Gümüşhane (Eastern Pontides, Turkey)
Authors:
EMRE AYDINÇAKIR, RAMAZAN GÜNDÜZ, CEM YÜCEL
ABSTRACT
In this study, the petrography, mineral chemistry and crystallization conditions were reported for the Alemdar and Işıkdere plutons located in limited areas in the south of the Eastern Pontides. These plutons, which trend mostly in NE-SW directions, were emplaced by cutting the Early- Middle Carboniferous-aged Gümüşhane Granitoid and Early-Middle Jurassic Şenköy formation. Petrographically, the studied plutons are compositionally fine to medium grained quartz-diorite, quartz monzodiorite and tonalite. The rocks in the plutons have granular, poikilitic, monzonitic, graphic and rare porphyritic textures with consist of plagioclase, (An05-92), hornblende (Mg# = 0.52- 0.81), biotite (Mg# = 0.32-0.67), orthoclase, quartz and Fe-Ti oxide. According to thermobarometric calculations, plutons have crystallization temperatures, pressures and oxygen fugacity values ranging from 541°C to 938°C, 0.1 to 4.4 kbar, and -23 to-12, respectively. The estimated water content calculated from amphibole is between 4.4 to 7.8%. It can be concluded that the studied plutons were emplaced at mid to shallow crustal depths (~4-15 km).
https://doi.org/10.19111/bulletinofmre.649808
Keywords:
Mineral chemistry, Geothermobarometer, Jurassic magmatism, Eastern Pontides, Gümüşhane, Turkey.