Two materials are studied to synthesize a vinyl painting. Iron ore is an iron pigment with an oolithic structure containing phosphorus. The second material is a steel by-product. The raw materials proprieties were studied by chemical, particle size, thermal, XRD and spectrophotometric analysis. The iron contents of the pigment and scale are respectively 53.18% and 73.83%. The grindability of scale is better than that of the pigment. The particle volume distribution is 0.7 to 32 µm for scale and 0.6 to 40 µm for pigment. TGA and DTA tests show that the pigment loses weight with phase dissolution by consuming energy and the scale gains weight with the formation of a new phase when the temperature increases. The SEM of the scale showed a homogeneous structure of iron oxide grains ranging from 1 to 10 μm. XRD analysis shows that the iron in the pigment is in the form of (Fe2O3) and FeO (OH)) and very little (Fe2SiO4). The iron in the scale is in the form of (FeO, Fe2O3 and Fe3O4). Spectrophotometric tests show that the two materials have no absorption and their reflection is maximum (100%) in the visible range.
Importance of grain size distribution in quantitative analysis using Rietveld Method: An experimental study
Authors:
Arif TALAY, Cumhur Ozcan KILIÇ
ABSTRACT
The Rietveld method refines a theoretical line profile until it fits the measured profile using a least squares methodology. In Rietveld method, complete qualitative mineral determination, mineral chemistry, appropriate XRD analytical conditions and sample preparation steps should be applied correctly. This study aims to determine the grain size-dependent variations in the quantitative compositions of minerals with various chemical compositions and crystallographic characteristics. Eight pure minerals (quartz, calcite, halite, colemanite, barite, polyhalite, gypsum, thenardite) are been selected, powdered, pulverized and separated into 3 different grain sizes as 228μm (Dv90), 29μm (Dv90) and 8μm (Dv90). These minerals are mixed in certain proportions to prepare three mixture samples. Mixture samples are evaluated using the Rietveld Method on XRD whole rock patterns and then compared to the actual reference mixture sample whose mixing ratio is known for each grain size. Sample with a grain size of 8μm (Dv90) with random orientation gave the closest result compared to the reference content. If the structural and physical refinement stages are processed properly, accuracy of percentage mineralogical composition increases when the grain size decreases.
The Jebel El Onk region presents a complex geological history, starting with Maastrichtian limestones. Early Paleocene subsidence intensified, leading to the deposition of thick marly horizons and black marl shales during the early Thanetian. This was followed by the formation of a significant phosphate sequence during the late Thanetian to early Ypresian, comprising interbedded marls, phosphorites, and dolomites, and concluding with lagoonal gypsum marls and phosphate-rich clays, subsequently overlain by Miocene sediments. This study focuses on the Jebel-Onk phosphate deposit, with a particular emphasis on characterizing diverse phosphate facies and assessing their implications for resource management. Using X-ray Diffraction analysis, the apatite group minerals and associated rock components from the Djemi-Djema-East deposit were identified. To further elucidate the deposit’s morphology and surrounding lithology, the study integrated geochemical data and lithological succession derived from core drilling. An automatic mapping of the Paleo-Eocene stratiform phosphate body highlighted spatial irregularities in thickness and established correlations with the supra-layer cover, consisting of Ypresian and Lutetian flint limestones and Miocene sands. Chemical element analysis revealed content variations between the two dominant phosphate types, beige and dark gray, with isotener maps illustrating geochemical heterogeneities within the phosphate layer. Bi-variable statistical analyses provided additional insights, demonstrating strong positive correlations between P2O5, CaO, and SiO2, while MgO showed a negative correlation. Principal Component Analysis (PCA) further identified three distinct geochemical associations, corresponding to the phosphate material, the organic and dolomitic matrix, and the clay material. These findings offer valuable insights for optimizing selective phosphate exploitation. By identifying spatial thickness variations, geochemical properties, and facies transitions, the study enables precise targeting of high-grade zones, reduces waste, and supports strategic planning for sustainable resource management at the Djemi-Djema Est deposit.
Estimation of co-seismic land deformation due to Mw 7.3 2017 earthquake in Iran (12 November 2017) using Sentinel-1 DInSAR
Authors:
FATMA CANASLAN ÇOMUT, ŞULE GÜRBOĞA, Tayeb SMAIL
ABSTRACT
A strong shaking with Mw 7.3 occurred on 12th November 2017 around the Sarpol-e Zahab town in the border area between Iran and Iraq. It has a number of foreshocks and aftershocks increasing the total deformation, cumulatively. In this study, we have investigated how earth surface deformed after such a strong earthquake and its scatters. Because, the deformation inspection are indispensable for the safety of citizens and infrastructures. The best way for monitoring of surface deformation in such a big event is the SAR technique. This system can work effectively during night and day under different weather conditions. The Interferometric SAR (InSAR) allows accurate measurements of surface deformation in mm resolution. There are several methods for the application of SAR techniques and one of them is Differential InSAR (DInSAR) indicating an uplift and subsidence around epicentral area precisely. We preferred to use it for sensitive vertical displacement in the target area. The seismological data from the observatory centers indicate that the recent earthquake sourced from the NW-SE trending, northeast dipping High Zagros Reverse Fault Zone. According to the results, epicentral area has been exposed a vertical displacement with 90 cm uplift and -41 cm subsidence in the northeastern and southwestern block of the fault, respectively.
https://doi.org/10.19111/bulletinofmre.604026
Keywords:
Interferometry, DInSAR, 12 November 2017 Iran earthquake.
Boris Yu ZUEV, Ruslan S. ISTOMIN, Stanislav V. KOVSHOV, Vyacheslav M. KITSIS
Indexed In · Volume 162 / 2020
Physical modeling the formation of roof collapse zones in Vorkuta coal mines
Authors:
Boris Yu ZUEV, Ruslan S. ISTOMIN, Stanislav V. KOVSHOV, Vyacheslav M. KITSIS
ABSTRACT
Collapse of the roof during mining is a constant threat to the lives of miners and equipment performance. To predict it, different numerical and physical approaches are used. Physical modeling of the massif region from -951 m to -841 m using equivalent materials were undertaken in this investigation. Various options for mining the Vorkuta coal deposit were considered: mining only the upper industrial seam, mining the lower coal seam as a protective layer to the upper one, and assessing the impact on the collapse zone of the complex structure of the upper coal seam roof while maintaining an upward order of mining. The main results were as follows: calculated collapse zone is approximately 30% larger than theoretical; collapse zone decreased when using mining with lower protective coal seam; the largest collapse zone was observed when pinching the rocks in upward mining order. Therefore, the research has shown the need to adjust the project for a larger methane yield. Further large-scale modeling is needed for understanding the characteristics of the collapse zone.
https://doi.org/10.19111/bulletinofmre.620478
Neogene stratigraphy and regional correlation of the Çeşme Peninsula, Western Anatolia, Turkey
Authors:
Fikret GÖKTAŞ
ABSTRACT
This study aims to investigate the stratigraphy and regional correlation of terrestrial Neogene sediments and volcanics in the Çeşme Peninsula. Neogene deposition is represented by two main sedimentary successions separated from each other by an angular unconformity. The lacustrine dominated Çeşme group characterized the Lower-Middle Miocene deposition is formed by Şifne, Ovacık and Çiftlik formations. The felsic pyroclastics (Alaçatı pyroclastics), which are the early products of the Armağandağı volcanism, laterally associated with the Çeşme group deposition, deposited on the Şifne formation and interrupted the lacustrine sedimentation. The lacustrine sedimentation continued uninterruptedly with Ovacık and Çiftlik formations after the deposition of pyroclastics, which terminated the sedimentation of the Şifne formation. The calc-alkaline Armağandağı volcanism is composed of felsic pyroclastics, andesitic volcaniclastics (Reisdere volcaniclastics) and lavas (Zeytineli lava) respectively from bottom to top. The Late Miocene-Early (?) Pliocene Kaştepe group, which covers all these units with angular unconformity, is represented by a succession, which grades from alluvial fan (Karagöz formation) up to lacustrine deposits (İnlice formation).
https://doi.org/10.19111/bulletinofmre.581658
Keywords:
Western Anatolia, Çeşme Peninsula, Neogene stratigraphy, Neogene volcanism.