Volume 154 · 2017 · 15 ARTICLES
All Articles In This Issue
01
Indexed In · Volume 154 / 2017
ONE OF THE MAİN NEOTECTONİC STRUCTURES İN THE NW CENTRAL ANATOLİA: BEYPAZARI BLİND THRUST ZONE AND RELATED FAULT-PROPAGATİON FOLDS
Authors: ABSTRACTThis paper suggests that the structure known as “Beypazarı flexure / monocline” in the Turkish geology literature should be named as “Beypazarı fault-propagation folds”. Beypazarı, Kilci and Başören blind thrusts together with Erenler back thrust constitute the Beypazarı Blind Thrust Zone which is an active neotectonic structure as indicated by earthquake activity. NW-SE contraction created by the interaction between the North Anatolian Fault Zone, the Kırıkkale-Erbaa Fault Zone and the Eskişehir Fault Zone produced the Eldivan-Elmadağ Pinched Crustal Wedge, the Abdüsselam Pinched Crustal Wedge and the Beypazarı Blind Thrust Zone. These structures take up the internal deformation of the Anatolian Plate.
Keywords:
02
Indexed In · Volume 154 / 2017
STRUCTURAL FEATURES OF THE NİĞDE MASSİF İN THE ÇAMARDI (NİĞDE) DİSTRİCT
Authors: ABSTRACTIn the Çamardı (Niğde) region, Niğde Massif is composed of Palaeozoic-Mesozoic marble, gneiss and quartzite. The high-grade metamorphic rocks of the Massif are cut by Cretaceous granodiorites. These rocks are unconformably overlain by Paleocene-Eocene low-grade metamorphic rocks. Upper Cretaceous-Eocene flysch and island-arc type volcanic rocks tectonically overlie the above mentioned units. The youngest rocks in the area are Oligocene-Quaternary continental sedimentary and volcanic rocks. The rocks of the massif have been subjected to at least four ductile deformational events, that are designated as D1, D2, D3 and D4. The first phase of deformation produced recumbent isoclinal folds (F1-F2 folding) which are often intrafolial and rootless, and pervasive axial-planar foliation. Bedding in the metasedimentary rocks of the massif is almost completely transposed into S1-foliation. D2 event generated northeast-southwest trending and variably plunging folds (F3 folding) on the map scale. The superposition of F3 folds over the F1-F2 folds generated Type-2 mushroom fold interference patterns. The second generation inclined folds (F2) are very tight to isoclinal and generally asymmetric. D3- event formed a large dome structure, possibly related to the granodioritic intrusions in the studied area. D4-event is characterised by northwest-southeast trending and southeast plunging map scale synformal and antiformal folds. During the D4-event both the rocks of massif and its Paleocene-Eocene cover rocks are folded (F5- folding). High competency contrast of the lithologies existing across the boundary between the massif and the cover during F5- folding has led to the formation of map scale cuspate-lobate folds. Microscopic observations have shown that the cover rocks of the massif are metamorphosed under the very low grade metamorphic conditions and gained cleaved structures, during the D4-event.
Keywords:
03
Indexed In · Volume 154 / 2017
STRATİGRAPHY AND STRUCTURE OF THE SOUTHEASTERN PART OF PİRAMAGROON ANTİCLİNE, SULAİMANİ AREA, NORTHEAST IRAQ
Authors: ABSTRACTThe Piramagroon anticline (or Pira Magrun Mountain) elongates directly to the northwest of Sulaimani city, Northeast Iraq and its southeastern part contains two other anticlines, named Harmetool and Yakhyian anticlines in addition to their complementary synclines and many other smaller folds. The anticline has experienced intense search for oil in the last few years and a well is drilled to a depth of 3000 meters but, any evidence of oil or gas wasn’t found. In the present study, the southeastern part has been studied stratigraphically and structurally and the previous studies have been critically reviewed which may help to reason about the absence of oil in the area. In this study the stratigraphy of the anticline has been determined and Kometan, Gulneri, Dokan, Balambo and Sarmord formations have been plotted on a geological map and stratigraphic column and the nannofossils have been used for the aging of intervals with undetermined ages. The thickness of the Gulneri Formation is 2-4 m and by the analysis of nannofossils its age was identified as Late Cenomanian-Early Turonian. Lithology and bedding styles of the Dokan and Upper part of the Balambo formations are very similar to Kometan Formation and they can be determined either by fossils or by using Gulneri Formation as marker bed. The outcrop of the Gulneri Formation is helpful for differentiation since it is soft and can be recognized easily in the field by its darker color. The structure of the anticline is relatively complex as it consists of asymmetrical anticlines with southwest plunge mainly in few places while it changes to overturned fold in others and is deformed by reverse fault. The anticlines are shaped by detachments on the Gulneri and Sarmord formations and by the other older soft rocks. The newly formed anticlines have the style of multi-detachment fold or multi-detachment faulted fold.
Keywords:
04
Indexed In · Volume 154 / 2017
AN APPROACH TO COAST EDGE LINE AT THE EASTERN ANTALYA MARGINAL-MARINE SEA SIDES
Authors: ABSTRACTIn this study, geological and geomorphological studies having the solution approaches for the coast edge line problem at the marginal-marine environments were realised and some solutions were proposed. The eight following locations were chosen: South of Lara Main Road (1), Aksu River Exit (2), Acısu Stream-2 (3), Ağılısu Stream Exit (4), Köprüçay Exit (5), seashore at the south of Evrenseki (6), seashore at the east of Side (7) and Kızılot (8). Past and new images of the Google Earth satellite views, topographic maps and aerial views; lithological-sedimentological observations, fauna data in sediments, plant cover, artificial structures, previous literature and related law and rules were taken into consideration. Besides the matter were also evaluated in the views of tectonics and sea level changes. From the obtained data two significant subjects are seen as important points on the matter. The first is backward date and validity period in future. The second is effective sea level in height. In fact, recent geomorphologic structure of the eastern Antalya Coasts is the result of mixed functions such as wave, river and wind dominated activities. It is also important to indicate that internal parts of the land also comprise very low elevations up to just a few meters above the sea-level. As a result it is brought out that last and future centuries as a time assume for the coast edge line solution and observations on the sea level changes in last and future decades as a space are present as significant approaches to the solution of the problem.
Keywords:
05
Indexed In · Volume 154 / 2017
GRAIN SIZE, TOTAL HEAVY MINERAL AND ELEMENT DISTRUBITION OF ACTUAL SEDIMENTS ON BOTTOM OF HISARÖNÜ AND DATÇA BAYS AND ITS CONTROL FACTORS
Authors: ABSTRACTThis paper explain research results for Holocene sedimentary processes and controlling factors on Datça and Hisarönü Bays located in south west Turkey. For this purpose, we collected sea bottom grab samples (upper 30 cm) from 71 stations and seismic profiles (we use only one sample explain to sedimentary process) collected in MTA-SELEN research ship on Hisarönü and Datça Bays. It is known and widely applied in seismic analysis methods and techniques are used on seismic profile which according to the continental shelf edge or threshold current -90 / -120 m water depth. At the same time, seismic profile were showed sea level changes of the Quaternary period and exhibits seismic facies parameters. According to radiocarbon dating calculations and we estimate these sediments which are 2694-14700 years of before present. Sediments grain size are 1-18% gravel, 7-85% sand, 6-69% silt and 2-30% clay size is composed of clastic material. Although silt and clay (mud) the most widely sediments are in our investigation area, we run into significant sand and gravel grain size important. We discuss regional differences grain size distribution and to be here residual (relic) sediments are in our investigation area. The total amount of heavy mineral-rich black sand is mostly below 2%, ophiolite and chromite-rich central and eastern regions is as high as 13%. Inorganic geochemistry of sediments are Mg, Cu, Ni and Fe amount is significant. Regional changing river drainage system, bay morphology, terrestrial and marine resources and outcrops also waves and currents effect not only sediment grain size distribution, but also effect the total heavy mineral content and the main elements composition.
Keywords:
06
Indexed In · Volume 154 / 2017
MAASTRICHTIAN - SELANDIAN PLANKTONIC FORAMINIFERA BIOSTRATIGRAPHY AND PALAEOECOLOGICAL INTERPRETATION OF AKVEREN FORMATION IN BARTIN AREA (WESTERN BLACK SEA, TURKEY)
Authors: ABSTRACTThe changes in planktonic foraminifera assemblages were studied in two sections composed of clayey limestone, limestone, claystone and marl in the Akveren Formation in the Bartın Province. Pseudoguembelina palpebra, Racemiguembelina fructicosa, Abathomphalus mayaroensis and Pseudoguembelina hariaensis biozones in the Maastrichtian and Parvularugoglobigerina eugubina, Glomobanomalina compressa/Praemurica uncinata, Praemurica uncinata and Morozovella angulata biozones in the Paloecene were determined using planktonic genus and species identified in these sections. Paleoecological interpretations in this study were completed by using the relative abundances of paleoecological species identified in these biozones. The abundance of Rugoglobigerina spp., Heterohelix globulosa, Pseudoguembelina spp., species that tolerated changes in sea water temperature and nutrition, increased in the Maastrichtian. In the uppermost Maastrichtian, high abundance of Racemiguembelina fructicosa, Heterohelix globulosa and Rugoglobigerina spp. show oligotrophic and warmer environmental conditions in this study. The abundance of globotruncanids are unstable due to environmental changes. The new species have smaller sizes and globular chambers emerged in the Paleocene. High abundance of Subbotina triloculinoides and Parasubbotina pseudobulloides show mesotrophic and cooler environmental conditions in the Danian. Morozovellid taxa started to dominate in the Selandian and environmental conditions changed from mesotrophic to oligotrophic.
Keywords:
07
Indexed In · Volume 154 / 2017
SEDIMENTOLOGY, MINERALOGY AND ORIGIN OF THE FIRST DISCOVER MAGNESITEDOLOMITE BELT IN MA’RIB DISTRICT, SW ARABIAN PENINSULA
Authors: ABSTRACTMagnesite mineralization of high purity was discovered and described herein for the first time from metamorphosed folded belt from Al-Thanyiah locality in Rub’Al-Khali sector, 360 km east of Sana’a City, northwest Yemen. The magnesite-metamorphic belt, belonging to the Precambrian/Neoproterozoic age? comprises thrust belt, which trends generally N-S direction. Magnesite mineralization was identified in an extended carbonate-metamorphic belt for several tens of kilometers cf. 31 km and occurred in association with 8 stratigraphic units. The thicknesses of pure magnesite bearing units are variable and ranges from 20 to 60 m, associated with dark green chlorite-schist with intersecting huge ultrabasic intrusions. Geochemical, mineralogical and petrographic analyses show that the magnesite concentrations in the stratigraphic units are ranging from 78% up to high purity of 99.6% cf. 35 to 48.9% MgO, with minor dolomite and calcite respectively. Little to rare content of talc and brucite were also recognized. Two thick, productive and high purity magnesite beds, the first is of 40 m thick and the second is 60 m in thickness, which reveals more than 95% MgCO3 and considered to be economic. The suggested origin of the magnesite mineralization is coming from high stress of regional metamorphism associated with ultramafic intrusions cf. amphibolite and harzburgite associated with diagenetic solutions rich in Mg2+, associated with the heat of magma. The alteration of dolomite to magnesite was formed by multiple phases to transform calcite and/or dolomite to magnesite.
Keywords:
08
Indexed In · Volume 154 / 2017
SODIUM SULFATE (GLAUBERITE-BLOEDITE) - HALITE ASSOCIATION İN THE TERTIARY (UPPER MIOSENE - PLIOCENE) KATRANDEDETEPE FORMATION, EREĞLİ-BOR BASIN, TURKEY
Authors: ABSTRACTThis study covers the investigations related to the glauberite-halite minerals detected in Neogene deposits of the Ereğ- li-Bor Basin in the Central Anatolia. The basin consists of Paleozoic basement rocks, the unconformably overlying Paleocene-Eocene-Oligocene marine sedimentary and volcano-sedimentary rocks, and the Lower Miocene-Pliocene lake deposits at the top which unconformably overlie all underlying layers. In the study, core drillings related to the determination of geological characteristics and investigation of the mineral potential of buried salt deposits were carried out in the Ereğli-Bor basin. As a result of drillings carried out, glauberite-bloedite, halite and bituminous shale horizons, which possess significant thickness and grade values, were cut for the first time in the Konya-Ereğli-Bor basin. Glauberite minerals were observed in three different structures as; 1- the Glauberite Mineral intercalated with High Graded, Bedded Clays, 2- the Glauberite Mineral with Disseminated Rosette Type in Low Graded Clays and 3- the Prismatic High Graded Glauberite Mineral intercalated with Halites. Bloedite minerals are mostly observed with halite. It was detected that the economical evaporitic formations in the Konya-Ereğli-Bor Basin had occurred within the Upper Miocene-Pliocene Katrandedetepe formation which represents the playa-lake environment.
Keywords:
09
Indexed In · Volume 154 / 2017
PERMEABILITY OF SAVCIBEY DAM (BİLECİK) AXIS LOCATION AND DESIGN OF GROUT CURTAIN
Authors: ABSTRACTThis study comprise the design of the planned grout curtain in Savcıbey Dam (Söğüt/Bilecik) in order to provide impermeability along the dam axis. Within the context of field studies, engineering geology map was generated, ground investigation drilling was realized and permeability tests were performed. Within the field studies, the joint conditions of the geological units (Triassic aged Bozüyük Metamorphic schists) under the dam axis and its effect on permeability was observed considering the positions of the discontinuities with regard to the dam axis location. Orientation of discontinuities generally have strikes changing between N – S and NNE – SSW. 5 boreholes on dam axis, 2 boreholes on cofferdam, 3 boreholes on diversion tunnel and 2 boreholes on spillway total 245 m ground investigation borehole were drilled. In order to determine the permeability profile of dam axis and design the grout curtain, Lugeon tests in Bozüyük Metamorphic units observed in dam axis, falling head permeability tests in alluviums observed in thalveg and slope debris observed in right abutment were performed. Lugeon tests realized in Bozüyük Metamorphic units show that the unit is generally permeable and partly low permeable. Alluvium and slope debris are highly permeable. In addition, drilling works realized in dam axis shows that the augmentation of the weathering degree cause an increase of permeability in Triassic aged Bozüyük Metamorphic schists. As a result of these studies information about the permeability of Savcıbey Dam was collected and the grout curtain hole was designed. Accordingly, it is predicted that approximately 40 m depth of grout curtain from the stripping excavation with the depth of 1.50 m would prevent the possible leakages
Keywords:
10
Indexed In · Volume 154 / 2017
THE IMPORTANCE OF AMOUNT OF SETTLEMENT IN DETERMINING THE BEARING CAPACITY OF SOILS
Authors: ABSTRACTIn this study, it is aimed to determine safe bearing capacity of soils, which are out cropped around Tamzi and Akcakale villages located in Gumushane, providing allowable settlement conditions for an optimum foundation design. To define the geotechnical properties of soils, three trenches were dug and two seismic refraction with two Multichannel Spectral Analysis of Surface Waves (MASW) were carried out in each research area. Sieve analyses, shear box tests, triaxial compression tests were carried out on disturbed and undisturbed samples taken from the trenches. Seismic velocities of the soils are determined by seismic refraction and MASW methods. While determining the safe bearing capacity; the equations proposed by Terzaghi, Meyerhof, Kurtulus, Tezcan and Ozdemir, Turker, Keceli were used and the obtained safe bearing capacity values were compared to each other. After, the soils were modeled numerically by using finite elements method and safe bearing capacities providing allowable settlement conditions were determined. According to the results, safe bearing capacity values obtained from empirical equations are not satisfactory to have an optimum foundation design. For the optimum foundation design, safe bearing capacity should be accepted as 190 kN/m2 for clayey soil (CL) and 485 kN/m2 for the clayey sand (SC).
Keywords:
11
Indexed In · Volume 154 / 2017
INVESTIGATION OF GÜLLÜK (MUĞLA) WETLAND BY STABLE ISOTOPES (δ18O, δD)
Authors: ABSTRACTWetlands play an important role in the hydrologic cycle. This investigation was completed to determine the origin of waters and recharge-discharge areas using stable isotopes (δ18O and δD) which are fingerprints of the water in Güllük (Muğla) wetland. This area is important both economically and in terms of aquaculture environment in Turkey. Sample locations were selected from not only wetlands but also the possible recharge area that consists of karstic springs and streams. EC (Electrical Conductivity) of the waters range between 5080-41000 µS/cm, except streams. δ18O and δD contents of the samples ranged from -6.00‰ to 0.50‰ and from -29.1‰ to 2.1‰, respectively. In general, samples plotted between Global and Local Meteoric Water line with waters also plotted on the seawater mixing line. The sources of salinity were evaluated by δ18O-Cl in and around the wetland. Streams are under the influence of “Evaporation”; samples from Avşar and Koruköy are under the influence of “Both Evaporation and Seawater Mixing”; İçme and Ekinambarı springs, and Limni Lake are under the influence of “Seawater Mixing”; and Savran spring and Tuzla Lake are under the influence of “Dissolution of Salts-Leaching” processes. The fact that Savran source plotted in this area raises the question of whether the current sea water is the source of salinity. The recharge area of the wetland consists of karstic formations, sea water, streams and precipitation in the Güllük area.
Keywords:
12
Indexed In · Volume 154 / 2017
ASSESSMENT OF METAL-METALLOID CONTENT USING GEOSTATISTICAL METHODS IN GROUNDWATER OF KARABAĞLAR POLJE (MUĞLA, TURKEY)
Authors: ABSTRACTIn this research, heavy metals (Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd, Ba, Pb) and metalloids (As) which were sampled from 84 wells used as drinking water and irrigation water resources in Karabaglar Karstic Polje (Mugla, Turkey) were analyzed. The results were evaluated by different statistical methods in order to investigate the interaction between elements. Ti, Mn, Fe, Zn, Mo and Pb were detected in many wells. According to the results, As and Cu has the strongest correlation (R=0.832). As-Ni (R=0.789) and Cu-Ni (R=0.776) are the other strong correlations. The relationship between these elements were also shown by Cluster Analysis (CA). In respect to CA, the closest proximity distance matrix are found for these three elements. Also, elements composed 3 main clusters in dendrogram created from CA result matrix. These clusters match up with the findings of Principal Component Analysis (PCA) too. PCA gathers all elements up in 3 components: As, Cu and Ni at the first component; Mo and Cd at the second; Cr and Ba at the third. The accumulation of the elements studied were investigated by Kruskal-Wallis and Mann-Whitney U tests. According to the results, the least and most encountered elements are Cu and Ba, respectively. The amount of each element except Ni and Mo, is statistical significantly different (p<0.05). In addition, the amount of the elements as well as some water quality parameters were compared to EPA (U. S. Environmental Protection Agency) and Turkish inland water quality classes and no threatening situation was encountered.
Keywords:
13
Indexed In · Volume 154 / 2017
AN INVESTIGATION ON SINGLE-PARTICLE IMPACT BREAKAGE FUNCTIONS OF A GOLD ORE BY DROP-WEIGHT TECHNIQUE
Authors: ABSTRACTImpact breakage functions for a gold ore from Bergama region (Turkey) was estimated based on the single-particle impact breakage distributions of particles obtained from drop weight tests. For this purpose, a modified manual version of a JK Tech drop-weight test device was used. Effect of specific comminution energy (Ecs) on impact breakage distributions were investigated. Relationship between specific comminution energy and impact breakage product fineness (t10) parameter was established. Ecs-t10 model given in the literature was successfully fitted to the breakage test results. Ecs-t10 impact breakage model for the gold ore was proposed to be used in breakage function estimation. t-family curve approach was applied to estimate single particle breakage functions of the gold ore. For this purpose, t-family curves were modelled and variations of empirical breakage functions for the gold ore were estimated on different impact energy levels for comminution process modelling.
Keywords:
14
Indexed In · Volume 154 / 2017
THE REACTION OF PHYSICAL TRANSFORMATION OF THE GRAVITY DATA AND LINEARITY DILEMMA
Authors: ABSTRACTThis paper consists of opinions on the article entitled as “Investigation of the Seismic Velocity Distribution and Crustal Structure of Turkey by means of Gravity Data” which was published on the page 185 of the 153rd issue of the Bulletin of Mineral Research and Exploration. Within this context, it was aimed at defining some dilemmas encountered in the article, which was targeted in the exploration of the crustal structure in plate scale by means of data sets, and informing the reader. Here, the interactive relationships of Gravity and Seismic methods of which each one are discipline of expertise will be studied within scope of the mentioned article.
Keywords:
15
Indexed In · Volume 154 / 2017
RESPONSE TO THE “REACTION OF THE PHYSICAL TRANSFORMATION OF THE GRAVITY DATA AND LINEARITY DILEMMA”
Authors: ABSTRACTThere is not any filter such as the “apparent gravity linear filter”, which is mentioned by the criticizer, in the literature of geophysical potential methods.
The “apparent density filter” was used in the study. As the name implies; the crustal structure of Turkey was investigated in the article of “Investigation of the Seismic Velocity Distribution and the Crustal Structure of Turkey” (Akın, 2016). So; the article had different findings. The “Conrad discontinuity” has been one of the findings of this article. Or else; the distribution related to the Conrad discontinuity has not been the main topic of the article as it had been understood by the criticizer. In this study, the density and seismic velocity took their highest values within first 20 km’s of the continental crust as; 2.74 gr/cm³ and 5.86 km/s, respectively. This zone was considered at the same time as the Conrad discontinuity between the lower and upper crusts, and it had an approximate depth of 16 km.
Keywords:
No articles match your search.