Gold Ore, Comminution, Modelling, Breakage Function, Drop-Weight Test
Abstract:
Impact breakage functions for a gold ore from Bergama region (Turkey) was estimated based on the single-particle impact breakage distributions of particles obtained from drop weight tests. For this purpose, a modified manual version of a JK Tech drop-weight test device was used. Effect of specific comminution energy (Ecs) on impact breakage distributions were investigated. Relationship between specific comminution energy and impact breakage product fineness (t10) parameter was established. Ecs-t10 model given in the literature was successfully fitted to the breakage test results. Ecs-t10 impact breakage model for the gold ore was proposed to be used in breakage function estimation. t-family curve approach was applied to estimate single particle breakage functions of the gold ore. For this purpose, t-family curves were modelled and variations of empirical breakage functions for the gold ore were estimated on different impact energy levels for comminution process modelling.
Muhammed Emin BULGUROĞLU, Ali SARI, Sofiane BELHOCINE, Mehmet Sıddık KIZIL, Turhan AYYILDIZ, Demet Banu KORALAY
Indexed In · Volume 177 / August 2025
Geological and reservoir modelling of coalbed methane in Karadon Region of Zonguldak Basin (Türkiye): A case study
Authors:
Muhammed Emin BULGUROĞLU, Ali SARI, Sofiane BELHOCINE, Mehmet Sıddık KIZIL, Turhan AYYILDIZ, Demet Banu KORALAY
ABSTRACT
The Zonguldak Basin stands out as Türkiye’s primary hub for bituminous coal production alongside a notable coalbed methane content of mined coal seams. In this study, we are proposing for the first time an integrated approach of geological modelling, reservoir characterization, and production forecasting of one coalbed methane block within Zonguldak Basin to understand the potential of this unconventional resource. The study initiated with the development of a 3D geological model data from the Karadon coal mine. Results of several laboratory tests conducted on coal samples such as desorption capacity which is measured as 666.67 scf/ton is integrated into the model. A reservoir model was developed by incorporating gas composition, pressure-volume-temperature (PVT) characteristics, and special core analysis (SCAL) data. A combination of 1,2,3,4 and 5 wells scenarios is proposed to figure out the best production solution adapted to the study area. As a result, a 5-wells configuration also known as the “5 spot wells” layout is selected. Five wells will be in the same well pad but deviated 600 meters distance in target zones. Each well in the pad includes two frac stages at two separated coal and shale interbedded intervals. The final volumetric projection suggests a cumulative gas production estimates around 1.803 billion m3 from 5 wells, which confirms the potential of coalbed methane as an important additional energy resource to Türkiye’s economy.
Keywords:
Coalbed methane, Zonguldak Basin, Geological Modelling, Reservoir Simulation, Production Forecast.
Modelling and computation of gravitational attraction, gradient tensors, rotational and horizontal invariants of Asteroid Bennu (101955), Itokawa (25143) and Eros (433) via 2D Non-Uniform FFT
Authors:
İlkin ÖZSÖZ
ABSTRACT
The internal structure and mass distribution of the terrestrial objects are yet unknown. The 2D gravity model with a constant density of the terrestrial objects can shed light on the surficial or textural heterogeneity due to topographic variations of the terrestrial objects. Three different steroids, which are Bennu (101955), Itokawa (25143) and Eros (433) are modelled in this study. During the modelling phase, a different number of edges, elements, nodes, and faces are used to describe the 3D models of Bennu, Itokawa, and Eros. These 3D models are used in 2D Non-Uniform Fast Fourier Transform (NU-FFT) applications to obtain gravitational attraction with a constant density polyhedron model. Tensor gradients and tensor invariants of the modelled gravity anomaly are calculated. Three major outcomes are interpreted from tensor gradient and tensor invariants. Firstly, textural heterogeneity due to relatively low topography is detected in the central part of Bennu. Secondly, considerably different properties which can be related to surface variations between the two lobes of Itokawa are observed. Lastly, directional surficial heterogeneities were detected in Eros.
Güzin Gülsev UYAR AKSOY, Cemalettin Okay AKSOY, Hasan Eray YAMAN
Indexed In · Volume 169 / 2022
Estimation of blast vibrations by numerical modelling and signal analysis
Authors:
Güzin Gülsev UYAR AKSOY, Cemalettin Okay AKSOY, Hasan Eray YAMAN
ABSTRACT
Seismic waves carry all the geological and geotechnical characteristics of the units they pass along the route they travel on. Therefore, seismic waves can be called the signature of the route it passes through. If the blasting point is considered as source, blast-induced seismic waves measured at a certain distance from the source can be revealed and this form can be integrated into the dynamic numerical model, the effects that will occur at any point of the model can be predicted. In this study, seismic waves induced from single-hole blast and a group blast consisting of holes with the same characteristics as a pilot blast hole were obtained using particle velocity data obtained from seismographs at certain distances and integrated into the numerical model. The data processing technique used is to estimate the theoretical group blasting data from the pilot data according to the linear superposition principle and compare with the real group blasting data to determine the nonlinear behavior effect on the blast source from the difference. When the results were examined, it was observed that the numerical model results and field measurements coincided. The results of this study will make a significant contribution to the science of rock engineering.
https://doi.org/10.19111/bulletinofmre.1066943
STRATİGRAPHY AND STRUCTURE OF THE SOUTHEASTERN PART OF PİRAMAGROON ANTİCLİNE, SULAİMANİ AREA, NORTHEAST IRAQ
Authors:
Kamal Haji KARİM, Polla Azad KHANAQA
ABSTRACT
The Piramagroon anticline (or Pira Magrun Mountain) elongates directly to the northwest of Sulaimani city, Northeast Iraq and its southeastern part contains two other anticlines, named Harmetool and Yakhyian anticlines in addition to their complementary synclines and many other smaller folds. The anticline has experienced intense search for oil in the last few years and a well is drilled to a depth of 3000 meters but, any evidence of oil or gas wasn’t found. In the present study, the southeastern part has been studied stratigraphically and structurally and the previous studies have been critically reviewed which may help to reason about the absence of oil in the area. In this study the stratigraphy of the anticline has been determined and Kometan, Gulneri, Dokan, Balambo and Sarmord formations have been plotted on a geological map and stratigraphic column and the nannofossils have been used for the aging of intervals with undetermined ages. The thickness of the Gulneri Formation is 2-4 m and by the analysis of nannofossils its age was identified as Late Cenomanian-Early Turonian. Lithology and bedding styles of the Dokan and Upper part of the Balambo formations are very similar to Kometan Formation and they can be determined either by fossils or by using Gulneri Formation as marker bed. The outcrop of the Gulneri Formation is helpful for differentiation since it is soft and can be recognized easily in the field by its darker color. The structure of the anticline is relatively complex as it consists of asymmetrical anticlines with southwest plunge mainly in few places while it changes to overturned fold in others and is deformed by reverse fault. The anticlines are shaped by detachments on the Gulneri and Sarmord formations and by the other older soft rocks. The newly formed anticlines have the style of multi-detachment fold or multi-detachment faulted fold.
Gökhan KADINKIZ, Mustafa KARAKAŞ, Mehmet PEKGÖZ, Abdurrahman MURAT
Indexed In · Volume 154 / 2017
SODIUM SULFATE (GLAUBERITE-BLOEDITE) - HALITE ASSOCIATION İN THE TERTIARY (UPPER MIOSENE - PLIOCENE) KATRANDEDETEPE FORMATION, EREĞLİ-BOR BASIN, TURKEY
Authors:
Gökhan KADINKIZ, Mustafa KARAKAŞ, Mehmet PEKGÖZ, Abdurrahman MURAT
ABSTRACT
This study covers the investigations related to the glauberite-halite minerals detected in Neogene deposits of the Ereğ- li-Bor Basin in the Central Anatolia. The basin consists of Paleozoic basement rocks, the unconformably overlying Paleocene-Eocene-Oligocene marine sedimentary and volcano-sedimentary rocks, and the Lower Miocene-Pliocene lake deposits at the top which unconformably overlie all underlying layers. In the study, core drillings related to the determination of geological characteristics and investigation of the mineral potential of buried salt deposits were carried out in the Ereğli-Bor basin. As a result of drillings carried out, glauberite-bloedite, halite and bituminous shale horizons, which possess significant thickness and grade values, were cut for the first time in the Konya-Ereğli-Bor basin. Glauberite minerals were observed in three different structures as; 1- the Glauberite Mineral intercalated with High Graded, Bedded Clays, 2- the Glauberite Mineral with Disseminated Rosette Type in Low Graded Clays and 3- the Prismatic High Graded Glauberite Mineral intercalated with Halites. Bloedite minerals are mostly observed with halite. It was detected that the economical evaporitic formations in the Konya-Ereğli-Bor Basin had occurred within the Upper Miocene-Pliocene Katrandedetepe formation which represents the playa-lake environment.
ASSESSMENT OF METAL-METALLOID CONTENT USING GEOSTATISTICAL METHODS IN GROUNDWATER OF KARABAĞLAR POLJE (MUĞLA, TURKEY)
Authors:
Bedri KURTULUŞ, Çağdaş SAĞIR, Özgür AVŞAR
ABSTRACT
In this research, heavy metals (Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd, Ba, Pb) and metalloids (As) which were sampled from 84 wells used as drinking water and irrigation water resources in Karabaglar Karstic Polje (Mugla, Turkey) were analyzed. The results were evaluated by different statistical methods in order to investigate the interaction between elements. Ti, Mn, Fe, Zn, Mo and Pb were detected in many wells. According to the results, As and Cu has the strongest correlation (R=0.832). As-Ni (R=0.789) and Cu-Ni (R=0.776) are the other strong correlations. The relationship between these elements were also shown by Cluster Analysis (CA). In respect to CA, the closest proximity distance matrix are found for these three elements. Also, elements composed 3 main clusters in dendrogram created from CA result matrix. These clusters match up with the findings of Principal Component Analysis (PCA) too. PCA gathers all elements up in 3 components: As, Cu and Ni at the first component; Mo and Cd at the second; Cr and Ba at the third. The accumulation of the elements studied were investigated by Kruskal-Wallis and Mann-Whitney U tests. According to the results, the least and most encountered elements are Cu and Ba, respectively. The amount of each element except Ni and Mo, is statistical significantly different (p<0.05). In addition, the amount of the elements as well as some water quality parameters were compared to EPA (U. S. Environmental Protection Agency) and Turkish inland water quality classes and no threatening situation was encountered.
Keywords:
Groundwater, Heavy Metal, Muğla, Karst, Geostatistic