Home›MAASTRICHTIAN - SELANDIAN PLANKTONIC FORAMINIFERA BIOSTRATIGRAPHY AND PALAEOECOLOGICAL INTERPRETATION OF AKVEREN FORMATION IN BARTIN AREA (WESTERN BLACK SEA, TURKEY)
Article Details
MAASTRICHTIAN - SELANDIAN PLANKTONIC FORAMINIFERA BIOSTRATIGRAPHY AND PALAEOECOLOGICAL INTERPRETATION OF AKVEREN FORMATION IN BARTIN AREA (WESTERN BLACK SEA, TURKEY)
BULLETIN OF THE MINERAL RESEARCH AND EXPLORATION (MTA Dergisi)
Article Details
MAASTRICHTIAN - SELANDIAN PLANKTONIC FORAMINIFERA BIOSTRATIGRAPHY AND PALAEOECOLOGICAL INTERPRETATION OF AKVEREN FORMATION IN BARTIN AREA (WESTERN BLACK SEA, TURKEY)
The changes in planktonic foraminifera assemblages were studied in two sections composed of clayey limestone, limestone, claystone and marl in the Akveren Formation in the Bartın Province. Pseudoguembelina palpebra, Racemiguembelina fructicosa, Abathomphalus mayaroensis and Pseudoguembelina hariaensis biozones in the Maastrichtian and Parvularugoglobigerina eugubina, Glomobanomalina compressa/Praemurica uncinata, Praemurica uncinata and Morozovella angulata biozones in the Paloecene were determined using planktonic genus and species identified in these sections. Paleoecological interpretations in this study were completed by using the relative abundances of paleoecological species identified in these biozones. The abundance of Rugoglobigerina spp., Heterohelix globulosa, Pseudoguembelina spp., species that tolerated changes in sea water temperature and nutrition, increased in the Maastrichtian. In the uppermost Maastrichtian, high abundance of Racemiguembelina fructicosa, Heterohelix globulosa and Rugoglobigerina spp. show oligotrophic and warmer environmental conditions in this study. The abundance of globotruncanids are unstable due to environmental changes. The new species have smaller sizes and globular chambers emerged in the Paleocene. High abundance of Subbotina triloculinoides and Parasubbotina pseudobulloides show mesotrophic and cooler environmental conditions in the Danian. Morozovellid taxa started to dominate in the Selandian and environmental conditions changed from mesotrophic to oligotrophic.
The Paleocene-Eocene succession at Djebel Onk, northeastern Algeria, remains poorly understood, despite its significance for reconstructing paleoenvironments during a critical period of global change. Unlike the well-studied equivalent series in the Metlaoui-Gafsa Basin, the Algerian counterpart lacks a robust stratigraphic and paleoenvironmental framework. This study addresses this gap by applying detailed sedimentological and petrographic analyses, integrated with sequence stratigraphic principles based on the model of Vail. Five erosional surfaces delineate five truncated depositional sequences, each containing only a transgressive and highstand systems tract, indicating repeated interruptions in sedimentation. Eight lithofacies were identified, reflecting deposition along a carbonate ramp system that ranges from outer ramp to restricted lagoonal and tidal flat settings. These facies transitions reveal shifts between transgressive and regressive phases, including a notable phosphatic-rich interval and an upper evaporitic horizon. The uppermost sequence is interpreted as an inner ramp deposit from the terminal Ypresian to early Lutetian. Stratigraphic correlation with distal, pelagic facies supports this age assignment. The integration of facies architecture with the influence of eustatic and tectonic controls allowed identification of two second-order tectonoeustatic cycles. This refined framework enhances regional correlation of Paleocene-Eocene deposits in North Africa and underscores the complex stratigraphic evolution of the Kef Essnoun section.
Keywords:
Paleocene-Eocene, Sequence Stratigraphy, Carbonate Ramp, Facies Analysis, Djebel Onk
The genesis of Mordenite occurrences: Diagenetic and hydrothermal alteration processes of Paleocene volcanics in Ilıca (Yıldızeli), Türkiye
Authors:
Hülya ATEŞ
ABSTRACT
Different geological processes such as weathering, diagenesis in hydrological systems, hydrothermal processes and contact metamorphism have been proposed to explain the genetic relationships of mordenite occurrences. The mineralogical and genetic analyses in this study are essential for identifying alteration minerals and assessing reaction processes. The Yıldızeli region, located south of the İzmir-Ankara-Erzincan suture zone and northeast of the Kırşehir block, is significant for its mineral deposits. This area consists of Paleocene-Miocene volcano-sedimentary units. Analyse results of selected zone mordenite samples from the Paleocene volcanic units that host mordenite mineralization are linked to low-grade metamorphism, particularly associated with zeolite facies (150-300 °C, 1-3 kbar and pH 4-7), following tectonically controlled hydrothermal alteration. The zeolitization process involves interacting fluids crucial for mobilizing alkali elements, with compositional variations in mordenite indicating a continuous evolution toward equilibrium conditions under decreasing temperatures. The progression from mordenite to smectite, along with associated kaolinite occurrences, can be attributed to the hydrothermal circulation of alkaline waters and sodium extraction from underlying evaporites.
Muhittin GÖRMÜŞ, Mustafa YILDIZ, Alper BOZKURT, Aynur HAKYEMEZ
Indexed In · Volume 173 / April 2024
Paleocene-Eocene foraminifera from the Tuz Gölü Basin (Salt Lake Basin, Central Türkiye) and their paleoenvironmental interpretations
Authors:
Muhittin GÖRMÜŞ, Mustafa YILDIZ, Alper BOZKURT, Aynur HAKYEMEZ
ABSTRACT
Paleocene-Eocene aged sediments from the east of Tuz Gölü Basin (Central Türkiye) provide significant data for foraminifera contents and their paleoenvironmental clues. They are important in revealing the stratigraphy of the region and the Paleocene-Eocene geological history of Türkiye. The sediments, composed mainly of carbonates, are known as Karapınaryaylası Formation. In this formation, benthic foraminifera representing SBZ2 to SBZ12 biozones corresponding to the Selandian-Late Cuisian time interval were identified in ten measured stratigraphical sections. The zonal interval from the E7 Zone (late Ypresian) to the E10 Zone (Lutetian) is characterized by the marker species of planktonic foraminifera defined in the clayey limestones from the uppermost part. The studied formation is divided into four main facies and eleven sub-microfacies types. The clayey limestone levels of the Karapınaryaylası Formation, which generally starts with a transgressive sequence, contain abundant planktonic foraminifers, while the lithologies of grainstone, packstone and wackestone are rich in benthic foraminifers. Benthic foraminifer assemblages indicate different paleoenvironments from lagoon to back-bank, bank and fore-bank. The obtained foraminiferal data show the Selandian-Lutetian age range and various paleoenvironments from the lagoon to the open sea.
AN APPROACH TO COAST EDGE LINE AT THE EASTERN ANTALYA MARGINAL-MARINE SEA SIDES
Authors:
Muhittin GÖRMÜŞ, Levent BAŞAYİĞİT, Ahmet UYSAL
ABSTRACT
In this study, geological and geomorphological studies having the solution approaches for the coast edge line problem at the marginal-marine environments were realised and some solutions were proposed. The eight following locations were chosen: South of Lara Main Road (1), Aksu River Exit (2), Acısu Stream-2 (3), Ağılısu Stream Exit (4), Köprüçay Exit (5), seashore at the south of Evrenseki (6), seashore at the east of Side (7) and Kızılot (8). Past and new images of the Google Earth satellite views, topographic maps and aerial views; lithological-sedimentological observations, fauna data in sediments, plant cover, artificial structures, previous literature and related law and rules were taken into consideration. Besides the matter were also evaluated in the views of tectonics and sea level changes. From the obtained data two significant subjects are seen as important points on the matter. The first is backward date and validity period in future. The second is effective sea level in height. In fact, recent geomorphologic structure of the eastern Antalya Coasts is the result of mixed functions such as wave, river and wind dominated activities. It is also important to indicate that internal parts of the land also comprise very low elevations up to just a few meters above the sea-level. As a result it is brought out that last and future centuries as a time assume for the coast edge line solution and observations on the sea level changes in last and future decades as a space are present as significant approaches to the solution of the problem.
Keywords:
Akdeniz, Antalya, Coast Edge Line, Google Earth, Aerial Photo
THE IMPORTANCE OF AMOUNT OF SETTLEMENT IN DETERMINING THE BEARING CAPACITY OF SOILS
Authors:
SELÇUK ALEMDAĞ, Aslıhan CİNOĞLU, Elif GACENER
ABSTRACT
In this study, it is aimed to determine safe bearing capacity of soils, which are out cropped around Tamzi and Akcakale villages located in Gumushane, providing allowable settlement conditions for an optimum foundation design. To define the geotechnical properties of soils, three trenches were dug and two seismic refraction with two Multichannel Spectral Analysis of Surface Waves (MASW) were carried out in each research area. Sieve analyses, shear box tests, triaxial compression tests were carried out on disturbed and undisturbed samples taken from the trenches. Seismic velocities of the soils are determined by seismic refraction and MASW methods. While determining the safe bearing capacity; the equations proposed by Terzaghi, Meyerhof, Kurtulus, Tezcan and Ozdemir, Turker, Keceli were used and the obtained safe bearing capacity values were compared to each other. After, the soils were modeled numerically by using finite elements method and safe bearing capacities providing allowable settlement conditions were determined. According to the results, safe bearing capacity values obtained from empirical equations are not satisfactory to have an optimum foundation design. For the optimum foundation design, safe bearing capacity should be accepted as 190 kN/m2 for clayey soil (CL) and 485 kN/m2 for the clayey sand (SC).
AN INVESTIGATION ON SINGLE-PARTICLE IMPACT BREAKAGE FUNCTIONS OF A GOLD ORE BY DROP-WEIGHT TECHNIQUE
Authors:
Ömürden GENÇ
ABSTRACT
Impact breakage functions for a gold ore from Bergama region (Turkey) was estimated based on the single-particle impact breakage distributions of particles obtained from drop weight tests. For this purpose, a modified manual version of a JK Tech drop-weight test device was used. Effect of specific comminution energy (Ecs) on impact breakage distributions were investigated. Relationship between specific comminution energy and impact breakage product fineness (t10) parameter was established. Ecs-t10 model given in the literature was successfully fitted to the breakage test results. Ecs-t10 impact breakage model for the gold ore was proposed to be used in breakage function estimation. t-family curve approach was applied to estimate single particle breakage functions of the gold ore. For this purpose, t-family curves were modelled and variations of empirical breakage functions for the gold ore were estimated on different impact energy levels for comminution process modelling.
Keywords:
Gold Ore, Comminution, Modelling, Breakage Function, Drop-Weight Test