Savcıbey Dam, Lugeon Test, falling head permeability test, design of grout curtain hole
Abstract:
This study comprise the design of the planned grout curtain in Savcıbey Dam (Söğüt/Bilecik) in order to provide impermeability along the dam axis. Within the context of field studies, engineering geology map was generated, ground investigation drilling was realized and permeability tests were performed. Within the field studies, the joint conditions of the geological units (Triassic aged Bozüyük Metamorphic schists) under the dam axis and its effect on permeability was observed considering the positions of the discontinuities with regard to the dam axis location. Orientation of discontinuities generally have strikes changing between N – S and NNE – SSW. 5 boreholes on dam axis, 2 boreholes on cofferdam, 3 boreholes on diversion tunnel and 2 boreholes on spillway total 245 m ground investigation borehole were drilled. In order to determine the permeability profile of dam axis and design the grout curtain, Lugeon tests in Bozüyük Metamorphic units observed in dam axis, falling head permeability tests in alluviums observed in thalveg and slope debris observed in right abutment were performed. Lugeon tests realized in Bozüyük Metamorphic units show that the unit is generally permeable and partly low permeable. Alluvium and slope debris are highly permeable. In addition, drilling works realized in dam axis shows that the augmentation of the weathering degree cause an increase of permeability in Triassic aged Bozüyük Metamorphic schists. As a result of these studies information about the permeability of Savcıbey Dam was collected and the grout curtain hole was designed. Accordingly, it is predicted that approximately 40 m depth of grout curtain from the stripping excavation with the depth of 1.50 m would prevent the possible leakages
AN APPROACH TO COAST EDGE LINE AT THE EASTERN ANTALYA MARGINAL-MARINE SEA SIDES
Authors:
Muhittin GÖRMÜŞ, Levent BAŞAYİĞİT, Ahmet UYSAL
ABSTRACT
In this study, geological and geomorphological studies having the solution approaches for the coast edge line problem at the marginal-marine environments were realised and some solutions were proposed. The eight following locations were chosen: South of Lara Main Road (1), Aksu River Exit (2), Acısu Stream-2 (3), Ağılısu Stream Exit (4), Köprüçay Exit (5), seashore at the south of Evrenseki (6), seashore at the east of Side (7) and Kızılot (8). Past and new images of the Google Earth satellite views, topographic maps and aerial views; lithological-sedimentological observations, fauna data in sediments, plant cover, artificial structures, previous literature and related law and rules were taken into consideration. Besides the matter were also evaluated in the views of tectonics and sea level changes. From the obtained data two significant subjects are seen as important points on the matter. The first is backward date and validity period in future. The second is effective sea level in height. In fact, recent geomorphologic structure of the eastern Antalya Coasts is the result of mixed functions such as wave, river and wind dominated activities. It is also important to indicate that internal parts of the land also comprise very low elevations up to just a few meters above the sea-level. As a result it is brought out that last and future centuries as a time assume for the coast edge line solution and observations on the sea level changes in last and future decades as a space are present as significant approaches to the solution of the problem.
Keywords:
Akdeniz, Antalya, Coast Edge Line, Google Earth, Aerial Photo
THE IMPORTANCE OF AMOUNT OF SETTLEMENT IN DETERMINING THE BEARING CAPACITY OF SOILS
Authors:
SELÇUK ALEMDAĞ, Aslıhan CİNOĞLU, Elif GACENER
ABSTRACT
In this study, it is aimed to determine safe bearing capacity of soils, which are out cropped around Tamzi and Akcakale villages located in Gumushane, providing allowable settlement conditions for an optimum foundation design. To define the geotechnical properties of soils, three trenches were dug and two seismic refraction with two Multichannel Spectral Analysis of Surface Waves (MASW) were carried out in each research area. Sieve analyses, shear box tests, triaxial compression tests were carried out on disturbed and undisturbed samples taken from the trenches. Seismic velocities of the soils are determined by seismic refraction and MASW methods. While determining the safe bearing capacity; the equations proposed by Terzaghi, Meyerhof, Kurtulus, Tezcan and Ozdemir, Turker, Keceli were used and the obtained safe bearing capacity values were compared to each other. After, the soils were modeled numerically by using finite elements method and safe bearing capacities providing allowable settlement conditions were determined. According to the results, safe bearing capacity values obtained from empirical equations are not satisfactory to have an optimum foundation design. For the optimum foundation design, safe bearing capacity should be accepted as 190 kN/m2 for clayey soil (CL) and 485 kN/m2 for the clayey sand (SC).
THE REACTION OF PHYSICAL TRANSFORMATION OF THE GRAVITY DATA AND LINEARITY DILEMMA
Authors:
Ertan TOKER
ABSTRACT
This paper consists of opinions on the article entitled as “Investigation of the Seismic Velocity Distribution and Crustal Structure of Turkey by means of Gravity Data” which was published on the page 185 of the 153rd issue of the Bulletin of Mineral Research and Exploration. Within this context, it was aimed at defining some dilemmas encountered in the article, which was targeted in the exploration of the crustal structure in plate scale by means of data sets, and informing the reader. Here, the interactive relationships of Gravity and Seismic methods of which each one are discipline of expertise will be studied within scope of the mentioned article.