RESPONSE TO THE REACTION OF THE PHYSICAL TRANSFORMATION OF THE GRAVITY DATA AND LINEARITY DILEMMA
Abstract:
There is not any filter such as the “apparent gravity linear filter”, which is mentioned by the criticizer, in the literature of geophysical potential methods.
The “apparent density filter” was used in the study. As the name implies; the crustal structure of Turkey was investigated in the article of “Investigation of the Seismic Velocity Distribution and the Crustal Structure of Turkey” (Akın, 2016). So; the article had different findings. The “Conrad discontinuity” has been one of the findings of this article. Or else; the distribution related to the Conrad discontinuity has not been the main topic of the article as it had been understood by the criticizer. In this study, the density and seismic velocity took their highest values within first 20 km’s of the continental crust as; 2.74 gr/cm³ and 5.86 km/s, respectively. This zone was considered at the same time as the Conrad discontinuity between the lower and upper crusts, and it had an approximate depth of 16 km.
STRUCTURAL FEATURES OF THE NİĞDE MASSİF İN THE ÇAMARDI (NİĞDE) DİSTRİCT
Authors:
Ramazan DEMİRCİOĞLU, Yaşar EREN
ABSTRACT
In the Çamardı (Niğde) region, Niğde Massif is composed of Palaeozoic-Mesozoic marble, gneiss and quartzite. The high-grade metamorphic rocks of the Massif are cut by Cretaceous granodiorites. These rocks are unconformably overlain by Paleocene-Eocene low-grade metamorphic rocks. Upper Cretaceous-Eocene flysch and island-arc type volcanic rocks tectonically overlie the above mentioned units. The youngest rocks in the area are Oligocene-Quaternary continental sedimentary and volcanic rocks. The rocks of the massif have been subjected to at least four ductile deformational events, that are designated as D1, D2, D3 and D4. The first phase of deformation produced recumbent isoclinal folds (F1-F2 folding) which are often intrafolial and rootless, and pervasive axial-planar foliation. Bedding in the metasedimentary rocks of the massif is almost completely transposed into S1-foliation. D2 event generated northeast-southwest trending and variably plunging folds (F3 folding) on the map scale. The superposition of F3 folds over the F1-F2 folds generated Type-2 mushroom fold interference patterns. The second generation inclined folds (F2) are very tight to isoclinal and generally asymmetric. D3- event formed a large dome structure, possibly related to the granodioritic intrusions in the studied area. D4-event is characterised by northwest-southeast trending and southeast plunging map scale synformal and antiformal folds. During the D4-event both the rocks of massif and its Paleocene-Eocene cover rocks are folded (F5- folding). High competency contrast of the lithologies existing across the boundary between the massif and the cover during F5- folding has led to the formation of map scale cuspate-lobate folds. Microscopic observations have shown that the cover rocks of the massif are metamorphosed under the very low grade metamorphic conditions and gained cleaved structures, during the D4-event.
Barbaros ŞİMŞEK, Mustafa ERGİN, Murat EVREN, Özgür TÜRKMEN, Serkan PALAS, Hakan PEHLİVAN, Bahri Serkan AYDEMİR, Füsun ÖCAL
Indexed In · Volume 154 / 2017
GRAIN SIZE, TOTAL HEAVY MINERAL AND ELEMENT DISTRUBITION OF ACTUAL SEDIMENTS ON BOTTOM OF HISARÖNÜ AND DATÇA BAYS AND ITS CONTROL FACTORS
Authors:
Barbaros ŞİMŞEK, Mustafa ERGİN, Murat EVREN, Özgür TÜRKMEN, Serkan PALAS, Hakan PEHLİVAN, Bahri Serkan AYDEMİR, Füsun ÖCAL
ABSTRACT
This paper explain research results for Holocene sedimentary processes and controlling factors on Datça and Hisarönü Bays located in south west Turkey. For this purpose, we collected sea bottom grab samples (upper 30 cm) from 71 stations and seismic profiles (we use only one sample explain to sedimentary process) collected in MTA-SELEN research ship on Hisarönü and Datça Bays. It is known and widely applied in seismic analysis methods and techniques are used on seismic profile which according to the continental shelf edge or threshold current -90 / -120 m water depth. At the same time, seismic profile were showed sea level changes of the Quaternary period and exhibits seismic facies parameters. According to radiocarbon dating calculations and we estimate these sediments which are 2694-14700 years of before present. Sediments grain size are 1-18% gravel, 7-85% sand, 6-69% silt and 2-30% clay size is composed of clastic material. Although silt and clay (mud) the most widely sediments are in our investigation area, we run into significant sand and gravel grain size important. We discuss regional differences grain size distribution and to be here residual (relic) sediments are in our investigation area. The total amount of heavy mineral-rich black sand is mostly below 2%, ophiolite and chromite-rich central and eastern regions is as high as 13%. Inorganic geochemistry of sediments are Mg, Cu, Ni and Fe amount is significant. Regional changing river drainage system, bay morphology, terrestrial and marine resources and outcrops also waves and currents effect not only sediment grain size distribution, but also effect the total heavy mineral content and the main elements composition.
PERMEABILITY OF SAVCIBEY DAM (BİLECİK) AXIS LOCATION AND DESIGN OF GROUT CURTAIN
Authors:
Mustafa Can CANOĞLU, Bedri KURTULUŞ
ABSTRACT
This study comprise the design of the planned grout curtain in Savcıbey Dam (Söğüt/Bilecik) in order to provide impermeability along the dam axis. Within the context of field studies, engineering geology map was generated, ground investigation drilling was realized and permeability tests were performed. Within the field studies, the joint conditions of the geological units (Triassic aged Bozüyük Metamorphic schists) under the dam axis and its effect on permeability was observed considering the positions of the discontinuities with regard to the dam axis location. Orientation of discontinuities generally have strikes changing between N – S and NNE – SSW. 5 boreholes on dam axis, 2 boreholes on cofferdam, 3 boreholes on diversion tunnel and 2 boreholes on spillway total 245 m ground investigation borehole were drilled. In order to determine the permeability profile of dam axis and design the grout curtain, Lugeon tests in Bozüyük Metamorphic units observed in dam axis, falling head permeability tests in alluviums observed in thalveg and slope debris observed in right abutment were performed. Lugeon tests realized in Bozüyük Metamorphic units show that the unit is generally permeable and partly low permeable. Alluvium and slope debris are highly permeable. In addition, drilling works realized in dam axis shows that the augmentation of the weathering degree cause an increase of permeability in Triassic aged Bozüyük Metamorphic schists. As a result of these studies information about the permeability of Savcıbey Dam was collected and the grout curtain hole was designed. Accordingly, it is predicted that approximately 40 m depth of grout curtain from the stripping excavation with the depth of 1.50 m would prevent the possible leakages
Keywords:
Savcıbey Dam, Lugeon Test, falling head permeability test, design of grout curtain hole