BULLETIN OF THE MINERAL RESEARCH AND EXPLORATION (MTA Dergisi)
AUTHOR PROFILE
Articles by İlkin Özsöz
5 PUBLICATIONS
01
Volume 176 / 2025 · Pages: 115-133
İlkin ÖZSÖZ, Eşref AYLAN, Ceyhan Ertan TOKER
Indexed In · Volume 176 / 2025
Magnetic anomalies and geological signatures in the Black Sea: a comprehensive study of the east and west basins
Authors:
İlkin ÖZSÖZ, Eşref AYLAN, Ceyhan Ertan TOKER
ABSTRACT
This study investigates the origin of the Black Sea, focusing on the East and West Black Sea basins. Data such as Curie Point Depth values, heat flow, bathymetry, Moho depth, sediment thickness, and magnetic depth estimation were analyzed to explore the region’s geological features. Correlations between these parameters were assessed for each basin, shedding light on their tectonic history and the influence of volcanic rocks. Thinner sedimentary covers enhanced the detectability of rocks with higher magnetic properties, while the interiors showed lower magnetic anomalies due to younger sedimentary rocks. Edge detection techniques, like tilt angle and Local Wavenumber methods, improved magnetic data interpretation. The study computed Curie Point Depth and heat flow using 65 blocks, revealing greater depths in the Western Black Sea (up to 32 km) compared to the Eastern Black Sea (24-28 km). Two profiles (A-A’ and B-B’) were examined for further insights. Overall, this study provides valuable insights into the geological evolution of the Black Sea basins.
Keywords:
Curie Point Depth, Heat Flow, Tilt Derivative, Local Wavenumber, Correlation Plot.
Modelling and computation of gravitational attraction, gradient tensors, rotational and horizontal invariants of Asteroid Bennu (101955), Itokawa (25143) and Eros (433) via 2D Non-Uniform FFT
Authors:
İlkin ÖZSÖZ
ABSTRACT
The internal structure and mass distribution of the terrestrial objects are yet unknown. The 2D gravity model with a constant density of the terrestrial objects can shed light on the surficial or textural heterogeneity due to topographic variations of the terrestrial objects. Three different steroids, which are Bennu (101955), Itokawa (25143) and Eros (433) are modelled in this study. During the modelling phase, a different number of edges, elements, nodes, and faces are used to describe the 3D models of Bennu, Itokawa, and Eros. These 3D models are used in 2D Non-Uniform Fast Fourier Transform (NU-FFT) applications to obtain gravitational attraction with a constant density polyhedron model. Tensor gradients and tensor invariants of the modelled gravity anomaly are calculated. Three major outcomes are interpreted from tensor gradient and tensor invariants. Firstly, textural heterogeneity due to relatively low topography is detected in the central part of Bennu. Secondly, considerably different properties which can be related to surface variations between the two lobes of Itokawa are observed. Lastly, directional surficial heterogeneities were detected in Eros.
Interpretation of satellite gravity anomalies with pseudo-depth slicing method filter in Türkiye
Authors:
İlkin ÖZSÖZ, Ceyhan Ertan TOKER
ABSTRACT
In this study, discontinuities and major tectonic boundaries are interpreted in and around Türkiye by Bouguer gravity anomaly. The World Gravity Map 2012 is used for the interpretation of major tectonic features in the Anatolia Region. Radial average power spectrum (RAPS) and band-pass filter are used for long and short wavelength separation. For the whole study area, four depth segments are detected. Moreover, the radial average depths of these depth segments are 54.9 km, 32.2 km, 21.9 km and 8.0 km. In order to conduct better interpretation, the study area was divided into three subareas from the west to the east (area 1 to area 3). In area 1 (41.4 km, 21.2 km and 7.8 km) and area 2 (48.1 km, 20.0 km and 6.6 km), three depth sources are detected. Furthermore, four various depth segments are analysed in area 3 (54.3 km, 29.8 km, 20.8 km and 8.6 km). The interpretation of the whole study area, area 1, area 2 and area 3 showed that depth of the sediment accumulation in the Western Anatolia is estimated as 7.8 km.
Keywords:
Satellite Gravity Data, Spectral Methods, Pseudo - Depth Slicing Method, Radial Average Power Spectrum, Qualitative Interpretation.
Ilk_inv: a Matlab based algorithm for rapid computation of pseudo-3D density contrast distribution by using Bouguer gravity data
Authors:
İlkin ÖZSÖZ
ABSTRACT
The new generation Matlab-based algorithm provides a rapid estimation of density contrast distribution. The 3D assumption, which is based on the 1D equation, is used. Therefore, the output is called pseudo-3D instead of 3D. The algorithm uses singular value decomposition and the median filter to produce pseudo-3D results. The success of the method is tested by theoretical and field studies. For synthetic studies, single-source models produce reasonable outputs, compared to the true density contrast value. However, the multiple source model shows slight deviations which are ±0.3 g/cm3, with respect to the true density contrast value. The acceptable results are observed for the Bouguer anomaly of the eastern Mediterranean region. The resolution matrix indicates that the inversion process is biased due to the generalised inverse. The algorithm provides a quite different qualitative interpretation perspective to the interpreter..
https://doi.org/10.19111/bulletinofmre.959011
Keywords:
Singular Value Decomposition, Pseudo- 3D Density Map, Gravity Modelling.
APPLICATION OF TILT ANGLE METHOD TO THE BOUGUER GRAVITY DATA OF WESTERN ANATOLIA
Authors:
Fikret DOĞRU, Oya PAMUKÇU, İlkin ÖZSÖZ
ABSTRACT
In this study, tilt angle method was applied to Western Anatolia gravity data in order to estimate edges of the geological structures. Tilt angle was obtained in two different ways by using gravity and its vertical derivative. In potential field methods, tilt angle technique is expressed as the ratio of vertical derivative to horizontal derivatives of anomaly. In the tilt angle map, 0° contours defines structure edges, half of the distance between ±45° defines depth of upper structure. In the field work of the study, gravity data, which was measured in Western Anatolia, was used to obtain regional anomaly maps and tilt angle and tilt angle of vertical directional derivative were applied to these maps. A significiant difference was observed between western and eastern parts of the N-S striking line, througout 28o longitude, from the results of tilt angle which was obtained by applying upward continuation method (50, 75 and 100 km) to the Bouguer anomaly. Same difference was determined from the results of vertical derivative of tilt angle which was obtained from upward contuniation of Bouguer anomaly. Depth values were obtained from the results of tilt angle and vertical derivative of tilt angle methods between 7 and 43 km in study area. The obtained results were compared with geological structural boundary and possible depths of geological discontinuities were estimated. In addition, obtained results were investigated with seismic activity in the study area and compared with previous geological and geophysical studies.
DOI: 10.19111/bulletinofmre.305177