Singular Value Decomposition, Pseudo- 3D Density Map, Gravity Modelling.
Abstract:
The new generation Matlab-based algorithm provides a rapid estimation of density contrast distribution. The 3D assumption, which is based on the 1D equation, is used. Therefore, the output is called pseudo-3D instead of 3D. The algorithm uses singular value decomposition and the median filter to produce pseudo-3D results. The success of the method is tested by theoretical and field studies. For synthetic studies, single-source models produce reasonable outputs, compared to the true density contrast value. However, the multiple source model shows slight deviations which are ±0.3 g/cm3, with respect to the true density contrast value. The acceptable results are observed for the Bouguer anomaly of the eastern Mediterranean region. The resolution matrix indicates that the inversion process is biased due to the generalised inverse. The algorithm provides a quite different qualitative interpretation perspective to the interpreter..
Kıymet DENİZ, Yusuf Kağan KADIOĞLU, Tamer KORALAY, Bahattin GÜLLÜ
Indexed In · Volume 166 / 2021
The distribution of elements in the alteration of feldspatic minerals
Authors:
Kıymet DENİZ, Yusuf Kağan KADIOĞLU, Tamer KORALAY, Bahattin GÜLLÜ
ABSTRACT
Feldspar (alkali feldspar and plagioclases) and in recent years feldspathoid minerals are used as raw materials in the ceramic-glass industries. The igneous rocks such as granite, syenite and foid syenite which mainly contain these minerals have the potential to be raw materials. Some inclusions within the feldspatic minerals affect extremely negatively the desired values for raw material. In this study, the effective processes in the alteration of feldspatic minerals within the Özvatan foid syenites, the effects of alteration minerals in the raw material were evaluated and the effects of the elements released by alteration on the environment were revealed. The foid syenites consist of nepheline, orthoclase, plagioclase, cancrinite, sodalite, amphibole, biotite, pyroxene, melanite with a rare amount of sphene, zircon, apatite and fluorite. The contents of the sericite and kaolinite, which are formed as a result of an alteration of these rocks, increase in direct proportion to alteration degree. As a result of the alteration index values, foid syenites samples show the low degreed decomposed property. According to the calculated mobility index (MI) from chemical analyses, there is a quantitative decrease in the major oxides such as SiO2, Al2O3, Na2O, K2O, CaO and Fe2O3 in the foid syenites. In accordance with the all data, Özvatan foid syenites have been exposed both weathering and hydrothermal alteration and the effect of hydrothermal alteration are observed more frequently in the altered rock. While the excess of diaclase structures within the rock provides ease of operation, on the other hand, it accelerated the weathering and alteration processes.
https://doi.org/10.19111/bulletinofmre.901035
Keywords:
Foid Syenite, Alteration, Glass and Ceramic Raw Material, Özvatan, Central Anatolia.
Usability value of the Yenicekale formation exposure around the Pazarcık (Kahramanmaraş) as a cement raw material
Authors:
Güldemin DARBAŞ, Fatma BAYRAK, Ali GÜREL
ABSTRACT
The study area is located around Pazarcık - Narlı, Kahramanmaraş province. The aim of the study is to investigate the value of units belonging to the Yenicekale Formation Kışla Marl Member as cement raw material. As a result of XRD studies, it was determined that Yenicekale formation Kışla Marn Member which is exposed to large areas in the region is composed of illite, quartz, dolomite, calcite, and chlorite minerals by rock analyzed. By geochemical analysis, SiO2, Al2O3, Fe2O3, CaO, MgO, K2O, Na2O, SO3 contents of the units were determined and these values were compared with the limit values used in cement raw materials. When the results were evaluated, it was determined that the total alkali elements (Na2O+ K2O) were within the limit values, but others were below or above these limit values. In addition, with geochemical analyses, it was calculated Silicate and Aluminium Modules. The most suitable values for Silicate Modules in Turkish Cement Factories are 2.2 - 2.6. In this study, Silicate Modulus values are in the range of 1.94 - 5.22. Standard values or Aluminum are between 1.5 and 2.5. The values of Aluminum Modules determined in this study are in the range of 0.43 - 1.38. For Hydraulic Module, the standard values are in the range of 1.8 - 2.2. The values determined in this study are in the range of 0.24 - 5.
https://doi.org/10.19111/bulletinofmre.856536
Active tectonics of Gülpınar-Tuzla area (Biga Peninsula, NW Turkey): the source of 6 February-24 March 2017 earthquake cluster
Authors:
Ali KOÇYİĞİT, Şule GÜRBOĞA
ABSTRACT
The variation in the motion sense of Anatolian platelet in Aegean Sea resulted in a strike-slip tectonic regime and related neotectonic domain, the central to northern Aegean neotectonic province, which also includes both western Marmara Sea and Biga Peninsula. Our study focuses mostly on the Gülpınar-Tuzla earthquake area located at the southwestern tip of Biga Peninsula,which is controlled by the southern major strand of the North Anatolian Fault System (NAFS). The strand consists of two sections, the onshore Biga and offshore Babakale-Skyros sections. Both sections are seismically very active. The Gülpınar-Tuzla earthquake area is composed of the Paleozoic metamorphic rocks, the Oligo-Miocene granitoid pluton, Lower-Middle Miocene calcalkalic volcanic rocks and the Upper Miocene-Pliocene sedimentary sequence. All of these rocks, which formed and deformed (folded to tilted) in palaeotectonic period, are overlain with an angular unconformity by the Quaternary neotectonic basin fill, that is nearly flat-lying except for the faulted basin margins. Both the onshore and offshore sections of the southern strand are linked to each other in terms of the structures characterizing the Babakale pull-apart basin and the Gülpınar-Tuzla earthquake area. The latter is shaped by the NE-trending Gülpınar (GFZ) and Yenice-Gönen Fault Zone (YGFZ), the ENE-trending Edremit fault zone (EFZ), the WNW-trending Tuzla Fault Zone (TFZ) and three strike-slip basins (Ayvacık, Behramkale and Tuzla basins) developed along them. Some segments of both the TFZ and GFZ were reactivated by the occurrences of seven moderate-to small-sized independent earthquakes and related aftershocks over 2760. Five of the independent earthquakes have an origin of oblique-slip normal faulting, while the rest two seismic events are strike-slip faulting in origin. Focal mechanism solution diagrams of these two groups of earthquakes reveal that the Gülpınar-Tuzla area is under the control of a strike-slip neotectonic regime, which commenced in Early Quaternary time owing to the major inversion in extensional palaeotectonic regime. This is also supported by the palaeostress analysis of slip-plane data measured on fault slickensides. The uniform slip rates on both the YGFZ and EFZ are 10.8 mm/yr and 7.3 mm/yr, respectively.
https://doi.org/10.19111/bulletinofmre.984922
Keywords:
Active Tectonics, Recent Seismicity, Southern Major Strand, NAFS, Biga Peninsula.