Curie Point Depth, Heat Flow, Tilt Derivative, Local Wavenumber, Correlation Plot.
Abstract:
This study investigates the origin of the Black Sea, focusing on the East and West Black Sea basins. Data such as Curie Point Depth values, heat flow, bathymetry, Moho depth, sediment thickness, and magnetic depth estimation were analyzed to explore the region’s geological features. Correlations between these parameters were assessed for each basin, shedding light on their tectonic history and the influence of volcanic rocks. Thinner sedimentary covers enhanced the detectability of rocks with higher magnetic properties, while the interiors showed lower magnetic anomalies due to younger sedimentary rocks. Edge detection techniques, like tilt angle and Local Wavenumber methods, improved magnetic data interpretation. The study computed Curie Point Depth and heat flow using 65 blocks, revealing greater depths in the Western Black Sea (up to 32 km) compared to the Eastern Black Sea (24-28 km). Two profiles (A-A’ and B-B’) were examined for further insights. Overall, this study provides valuable insights into the geological evolution of the Black Sea basins.
The tectonic regime of Eastern Anatolia is determined by Arabian-Eurasian continentcontinent convergence and the mechanism occurred with the convergence. North Anatolian Fault Zone (NAFZ), Eastern Anatolian Fault Zone (EAFZ), North Eastern Anatolian Faults and Bitlis Zagros Suture Zone are formed by this convergence, represent the characteristic of lithospheric structure of the region. In the scope of this study, the gravity anomalies of Eastern Anatolia were used for investigating the lithospheric structure. Firstly, second order trend analyses were applied to gravity data for examining the characteristic of the anomaly. Later, the vertical and horizontal derivatives methods were applied to the same data. Generally, the purpose of the applying derivative methods is determining the vertical and horizontal borders of the structure. Therefore, this method gives the opinion about the characteristic of the lithospheric structure of the study region. According to the results of derivative methods, the structure transitions were increased rather especially with Bitlis Zagros Suture Zone. At the last step, the gravity studies were evaluated together with the seismic activity of the region. Consequently, the geodynamical structure of the region is examined with the previous studies done in the region.
HEAT FLOW OF THE KIRŞEHİR MASSIF AND GEOLOGICAL SOURCES OF THE RADIOGENIC HEAT PRODUCTION
Authors:
Uğur AKIN, Yahya ÇİFTÇİ
ABSTRACT
It is not often easy to distinguish the components of the mantle originated heat flow and radiogenic heat generation from each other. Surface heat flow is composed of two components. The first is the radiogenic heat source and the second is the heat flow originated from the upper mantle and the lower crust. In this study, heat flow and the radiogenic heat production of the Kýrþehir Massif and its geological sources were investigated. Curie point depths were calculated from aeromagnetic data. Geothermal gradient values were formed by considering the medium as homogenous and isotropic. The heat flow of the region was calculated using the heat transfer values of rock samples collected from field and it was determined that this value had ranged between 53 mWm-2 and 108 mWm-2. As a result of the evaluation of heat flow and heat production maps together, it was calculated that 60-92% of the average heat flow values of the region are mantle and 8-38% are radiogenic sourced. The radiogenic heat production in the study area, generally showed high anomaly values in young granitoids as predicted.
THE ASSESSMENT OF GEOTHERMAL POTENTIAL OF TURKEY BY MEANS OF HEAT FLOW ESTIMATION
Authors:
UĞUR AKIN, Emin U. ULUGERGERLİ, Semih KUTLU
ABSTRACT
In this study, the heat flow distribution of Turkey was investigated in the interest of exploring new geothermal fields in addition to known ones. For this purposes, the geothermal gradient was estimated from the Curie point depth map obtained from airborne magnetic data by means of power spectrum method. By multiplying geothermal gradient with thermal conductivity values, the heat flow map of Turkey was obtained. The average value in the heat flow map of Turkey was determined as 74 mW/m2. It points out existence of resources of geothermal energy larger than the average of the world resources. in terms of geothermal potential, the most significant region of Turkey is the Aydin and its surrounding with a value exceeding 200 mW/m2. On the contrary, the value decreases below 30 mW/m2 in the region bordered by Aksaray, Niğde, Karaman and Konya. The necessity of conducting a detailed additional studies for East Black sea, East and Southeast Anatolia is also revealed.
Keywords:
Heat flow, Curie temperature, Curie point depth, geothermal gradient
Fahmy O. MOHAMMED, Ahmed Ibraheem MOHAMED, Ibrahim H. GART, Diary A . Al-MANMI
Indexed In · Volume 176 / April 2025
Establishing of soil loss tolerance limit and sediment yield in Zagros fold-thrust belt: a case study in the Kanarwe river basin, Iraq-Iran
Authors:
Fahmy O. MOHAMMED, Ahmed Ibraheem MOHAMED, Ibrahim H. GART, Diary A . Al-MANMI
ABSTRACT
Soil degradation is a significant cause of topsoil loss; in most mountainous region watersheds, it leads to decreased agriculture productivity and reservoir storage. This study targeted calculating and mapping soil loss and sediment yield in the Lesser Zab watershed located between Iraq and Iran. The Revised Universal Soil Loss Equation (RUSLE) model was used to calculate the soil loss. A Digital Elevation Model of 30m, a Digital Soil map (1:500000), rainfall, and land cover were used to derive parameters. The soil loss rates are 58.1 and 0.1 tha-1yr-1. The total annual soil loss is 1037289 tonnes, of these 404512, covering 75% of Kanarwe river basin land. Most of these affected lands are in the eastern and middle part, which is below the FAOs standard allowable for tolerable soil erosion. Still, the rest covers 25 % of the basin in the west with a total annual soil loss equal to 632777 tonnes, above FAOs standard. The maximum and minimum sediment yield is 29 and 0.1 tha-1yr-1, respectively. Based on the statistical correlation coefficient, the most effective RUSLE parameters on sediment yield from high to low are topography 0.48, soil erodibility 0.38, and crop management 0.38.
Keywords:
RUSLE, Sediment Delivery, Zagros Thrust Zone, CN-SCS Curve, Dam Lifespan.
Ali ERGEN, Alper BOZKURT, Ercan TUNCAY, Ayhan ILGAR, Aynur HAKYEMEZ
Indexed In · Volume 176 / April 2025
Tectono-stratigraphy, formation and emplacement ages of the Beyşehir-Hoyran Nappes in the south of the Sultan Dağları (Isparta, SW Türkiye)
Authors:
Ali ERGEN, Alper BOZKURT, Ercan TUNCAY, Ayhan ILGAR, Aynur HAKYEMEZ
ABSTRACT
The Beyşehir-Hoyran Nappes (BHN), in the south of Sultan Dağları, consist of ophiolite, mélange and nappe slices of different lithologies and ages belonging to the oceanic crust and related rocks, which originated from the northern Neotethys and were thrusted southwards over the Taurus Platform. These nappes, namely the Marmaris Ophiolite Nappe, the Gülbahar Nappe and the Domuzdağ Nappe, are represented by three tectonically related Nappe-slices that extend as a narrow NW-SE trending belt to the south of the Sultan Dağları. The Marmaris Ophiolite nappe (Upper Cretaceous) is formed by three subunits namely the Marmaris Ophiolite, the Kızılcadağ Mélange and the Yenicekale metamorphics. Hornblende minerals from amphibolites of the Yenicekale metamorphic rock unit yielded a 40Ar-39Ar age of 93.9±0.34 Ma (Cenomanian-Turonian boundary). In addition, the Middle Triassic-Early Jurassic Orluca Formation of the Gülbahar nappe is mapped for the first time in the Sultan Dağları region. Paleontological and radiometric ages obtained from this study show that the formation of the BHN should began in the Turonian and ended in the Late Maastrichtian. The nappes, on the other hand, were emplaced over southern Sultan Dağları in the early-middle Paleocene and reached their present position as a result of late Eocene movements.
Keywords:
Beyşehir-Hoyran Nappes, Sultan Dağları, Gülbahar Nappe, Metamorphic Sole.
Discussion: Determination of Atterberg Limits Using the Vane Shear Test Method [Bull. Min. Res. Exp. (2024) 174: 1–10]
Authors:
Brendan O’KELLY, Amin SOLTANI
ABSTRACT
This article presents a discussion of the original research reported in the paper by Kayabalı et al. (2024) (the Authors) that was recently published in the Bulletin of the Mineral Research and Exploration Vol. 174, pp. 1–10. Using liquid limit (LL), plastic limit (PL) and vane shear strength against water content [i.e., su(VST)–w] results obtained for 100 fine-grained soil samples, the Authors performed multiple regression analyses to produce four strength-based correlations for predicting the LL and PL values based on su(VST)–w measurements. The Authors’ dataset primarily consisted of residual soils formed through the weathering of igneous rocks, along with a few lacustrine soil samples, all sourced from the vicinity of Ankara, Türkiye. This discussion article examines the veracity of the Authors’ claims regarding the predictive performance of their proposed correlations when applied to other fine-grained soils. Using a sizable independent database of dissimilar fine-grained soils compiled from the research literature, it is conclusively shown that, contrary to the Authors’ assertions, their proposed correlations generally produce poor LL and PL predictions when employed beyond the calibration soil types. This outcome is not unexpected, since the Authors’ data-driven correlations were deduced based on a specific dataset with limited diversity in terms of soil physico-chemical and mineralogical attributes. The article closes with a discussion of the plausible explanations for the poor applicability of the Authors’ correlations when apllied to dissimilar fine-grained soils.