Volume 176 · April 2025 · 11 ARTICLES
All Articles In This Issue
01
Indexed In · Volume 176 / April 2025
Assessment of active tectonics based on GIS and statistical model: A case study of upper Alaknanda catchment (western Himalaya, India)
Authors: ABSTRACTDue to continuing deformation of the Earth’s crust, degradation and aggradation processes, the upper part of the Alaknanda basin lying in the Garhwal Himalaya, India, is considered to be tectonically active. Active tectonics in this region made a considerable impact on the drainage system and the topographic expression. Using a digital elevation model (DEM) with a resolution of 30 m * 30 m and based on eight geomorphic indices [hypsometric integral (HI), drainage texture (Dt), asymmetry factor (AF), ruggedness number (Rd), valley floor width/height ratio (Vfw), lemniscate coefficient (k) and basin shape index (Bs)], we evaluated active tectonics. Application of Index of Active Tectonic (IAT) and clustering model disclose the sub-watersheds in the southern part covering watersheds 16, 17 and near Badrinath sub-watershed 4, 9 and 8 are tectonically highly active (Class-1, 1.500-1.781). Cluster analysis defines two prominent clusters of sub-watersheds: 2, 4,14 and 15 in cluster 1; and 6, 7, 8 and 18 in cluster 2. Cluster 1 includes sub-watersheds 2, 4, 14, 15, and 16 and very high, high, and moderate IAT magnitudes. Sub-watersheds 6, 7, 8, and 18 are included in Cluster 2, which has very high and high tectonic activity.
Keywords:
02
Indexed In · Volume 176 / April 2025
Effect of calculated dry rock bulk modulus on uncertainty in compressional wave velocities derived from Gassmann fluid substitution theory and fluid mixing law in a CO2 sequestration case
Authors: ABSTRACTThis study examines the effect of variations in dry rock bulk modulus (Kdry) on compressional wave velocity (Vp) using Gassmann fluid substitution theory and various fluid mixing laws in the context of CO2 sequestration in the Utsira formation at the Sleipner Field. Significant changes in Vp, exceeding 600 m/s, were observed, particularly when applying the Gassmann-Wood law, which demonstrated heightened sensitivity to saturation variations. In contrast, the Gassmann-Brie approach, utilizing an empirically selected constant, produced more stable and reliable results. This study emphasizes that relying solely on the Gassmann-Wood equation for Kdry calculations may result in inaccurate predictions, particularly for CO2-saturated formations. To mitigate this, laboratory measurements of Kdry are recommended to enhance the reliability of predictions. Furthermore, initial saturation conditions critically affect the Vp calculations, underlining the importance of selecting an appropriate mixing law to ensure accurate assessments during CO2 injection and storage.
Keywords:
03
Indexed In · Volume 176 / April 2025
Effect of degree of saturation on consolidation parameters of fine-grained soils
Authors: ABSTRACTTerzaghi (1943)’s theory of consolidation phenomenon has some limitations for unsaturated geological environments in nature. Additionally, soils are subjected to consolidation tests under partially saturation conditions. The scope of this study is to illustrate the effect of degree of saturation (Sr) on the consolidation parameters using remolded soil samples. For this purpose, swelling pressure, compression index (cc), re-compression index (cr), coefficient of consolidation (cv), and pre-consolidation stress (σp’) were determined for the samples having different degrees of saturation and plasticity (PI). The consolidation parameters obtained from “undersaturated” remolded samples with varying degrees of saturation were compared with the consolidation parameters obtained from “fully saturated” remolded samples to illustrate which parameters of consolidation are affected most by the degree of saturation. The effect of swelling of partially saturated samples was eliminated prior to conducting oedometer tests. Results indicated a meaningful relationship between the compression index and the degree of saturation, though the relationship with the recompression index was less certain. Pre-consolidation stress generally decreased as saturation increased, while no definitive trend was observed between the degree of saturation and the consolidation coefficient. Overall, most consolidation parameters were found to be somewhat affected by the degree of saturation.
Keywords:
04
Indexed In · Volume 176 / April 2025
Soil remediation at coastal plains with the help of DC Resistivity Method
Authors: ABSTRACTThe coastline of the Dardanos, a district of Çanakkale, Türkiye, suffers from saltwater intrusion due to excessive extraction of groundwater for domestic usage and also agricultural activities. Thus, the salinity level increased, and much of the land became unusable. The electrokinetic remediation method was employed to reduce the salinity level in the soil samples in laboratory conditions. The sample used in remediation is silty agricultural soil, with pH value and electrical conductivity (EC) of which are 8.33 and 1282 μS/cm respectively. In the lab-scale experiments, three different types of electrodes, aluminum, copper, and galvanized steel, were used in the tests. For each type of metal, electrode pairs were placed in the soil that was filled in a plastic container. Current variation was monitored while 1 VDC/cm was applied to electrodes. Average electrical conductivity reduces to 13.5%. As a side effect, all electrodes suffered from heavy corrosion which may be prevented by using anti-corrosion additives to reduce damage for future applications.
Keywords:
05
Indexed In · Volume 176 / April 2025
Mineralogical examination of biomass ashes: A preliminary study for potassium enrichment and phosphoric acid (H3PO4) production
Authors: ABSTRACTIn this study, biomass fly ash was investigated and determined by XRD (XRay Diffractometer) to be predominantly langbeinite, aphthitalite, sylvine, apatite and hydroxyapatite. An alkaline leaching study was carried out on the material in a glass reactor at l/s ratio 4 temperature 60°C at pH 12.85 and after drying was analyzed by ICP (Inducted couple plasma). The crystal structure composition of K2SO4 72.28% and potassium content of 33.47% (w/w) was recovered. The elemental transformations in this leaching process were: K 74.16%, Mg 0.55% was found to be 0.8%. It was found that a minimum of 4.84 g H2SO4 per 100 g fly ash was required to precipitate the Ca(OH)2 migrated into the liquid solution and the overall leaching efficiency was found to be 29.85%. In the alkaline leaching process, potassium was found to be easily recovered from each biomass ash. By adding 40 g H2SO4/100 g biomass waste remaining after leaching, a phosphorus recovery of 74.9% was observed. In this preliminary study, unsatisfactory results were obtained in obtaining the industry standard H3PO4. The reason for this is that the Al, Mg and K in the fly ash are subject to selective dissolution as a result of working at high pH in the alkaline leaching process.
Keywords:
06
Indexed In · Volume 176 / April 2025
Establishing of soil loss tolerance limit and sediment yield in Zagros fold-thrust belt: a case study in the Kanarwe river basin, Iraq-Iran
Authors: ABSTRACTSoil degradation is a significant cause of topsoil loss; in most mountainous region watersheds, it leads to decreased agriculture productivity and reservoir storage. This study targeted calculating and mapping soil loss and sediment yield in the Lesser Zab watershed located between Iraq and Iran. The Revised Universal Soil Loss Equation (RUSLE) model was used to calculate the soil loss. A Digital Elevation Model of 30m, a Digital Soil map (1:500000), rainfall, and land cover were used to derive parameters. The soil loss rates are 58.1 and 0.1 tha-1yr-1. The total annual soil loss is 1037289 tonnes, of these 404512, covering 75% of Kanarwe river basin land. Most of these affected lands are in the eastern and middle part, which is below the FAOs standard allowable for tolerable soil erosion. Still, the rest covers 25 % of the basin in the west with a total annual soil loss equal to 632777 tonnes, above FAOs standard. The maximum and minimum sediment yield is 29 and 0.1 tha-1yr-1, respectively. Based on the statistical correlation coefficient, the most effective RUSLE parameters on sediment yield from high to low are topography 0.48, soil erodibility 0.38, and crop management 0.38.
Keywords:
07
Indexed In · Volume 176 / April 2025
Tectono-stratigraphy, formation and emplacement ages of the Beyşehir-Hoyran Nappes in the south of the Sultan Dağları (Isparta, SW Türkiye)
Authors: ABSTRACTThe Beyşehir-Hoyran Nappes (BHN), in the south of Sultan Dağları, consist of ophiolite, mélange and nappe slices of different lithologies and ages belonging to the oceanic crust and related rocks, which originated from the northern Neotethys and were thrusted southwards over the Taurus Platform. These nappes, namely the Marmaris Ophiolite Nappe, the Gülbahar Nappe and the Domuzdağ Nappe, are represented by three tectonically related Nappe-slices that extend as a narrow NW-SE trending belt to the south of the Sultan Dağları. The Marmaris Ophiolite nappe (Upper Cretaceous) is formed by three subunits namely the Marmaris Ophiolite, the Kızılcadağ Mélange and the Yenicekale metamorphics. Hornblende minerals from amphibolites of the Yenicekale metamorphic rock unit yielded a 40Ar-39Ar age of 93.9±0.34 Ma (Cenomanian-Turonian boundary). In addition, the Middle Triassic-Early Jurassic Orluca Formation of the Gülbahar nappe is mapped for the first time in the Sultan Dağları region. Paleontological and radiometric ages obtained from this study show that the formation of the BHN should began in the Turonian and ended in the Late Maastrichtian. The nappes, on the other hand, were emplaced over southern Sultan Dağları in the early-middle Paleocene and reached their present position as a result of late Eocene movements.
Keywords:
08
Indexed In · Volume 176 / April 2025
Magnetic anomalies and geological signatures in the Black Sea: a comprehensive study of the east and west basins
Authors: ABSTRACTThis study investigates the origin of the Black Sea, focusing on the East and West Black Sea basins. Data such as Curie Point Depth values, heat flow, bathymetry, Moho depth, sediment thickness, and magnetic depth estimation were analyzed to explore the region’s geological features. Correlations between these parameters were assessed for each basin, shedding light on their tectonic history and the influence of volcanic rocks. Thinner sedimentary covers enhanced the detectability of rocks with higher magnetic properties, while the interiors showed lower magnetic anomalies due to younger sedimentary rocks. Edge detection techniques, like tilt angle and Local Wavenumber methods, improved magnetic data interpretation. The study computed Curie Point Depth and heat flow using 65 blocks, revealing greater depths in the Western Black Sea (up to 32 km) compared to the Eastern Black Sea (24-28 km). Two profiles (A-A’ and B-B’) were examined for further insights. Overall, this study provides valuable insights into the geological evolution of the Black Sea basins.
Keywords:
09
Indexed In · Volume 176 / April 2025
Sediment thickness in the Thrace Basin estimated from the three-dimensional inversion of magnetotelluric data
Authors: ABSTRACTThe time-variation of the magnetotelluric (MT) fields was recorded at 37 measurement stations in the Thrace Basin (North-western Türkiye) by a remote-reference MT system that records the MT data in two frequency bands allowing a data acquisition between 320–7.5 Hz and 6–0.00055 Hz, respectively. The measurement stations were located from the Aegean Sea to the Black Sea seashores along a 207 km profile in the southeast-northwest direction. Three-dimensional inversion of MT data outlined the main geological elements of the region, the interface between sedimentary cover and basement rocks. The total thickness of the sedimentary layers in the basin is interpreted using the inflection and deflection points of the three-dimensional resistivity model in the vertical direction.
Keywords:
10
Indexed In · Volume 176 / April 2025
Discussion: Determination of Atterberg Limits Using the Vane Shear Test Method [Bull. Min. Res. Exp. (2024) 174: 1–10]
Authors: ABSTRACTThis article presents a discussion of the original research reported in the paper by Kayabalı et al. (2024) (the Authors) that was recently published in the Bulletin of the Mineral Research and Exploration Vol. 174, pp. 1–10. Using liquid limit (LL), plastic limit (PL) and vane shear strength against water content [i.e., su(VST)–w] results obtained for 100 fine-grained soil samples, the Authors performed multiple regression analyses to produce four strength-based correlations for predicting the LL and PL values based on su(VST)–w measurements. The Authors’ dataset primarily consisted of residual soils formed through the weathering of igneous rocks, along with a few lacustrine soil samples, all sourced from the vicinity of Ankara, Türkiye. This discussion article examines the veracity of the Authors’ claims regarding the predictive performance of their proposed correlations when applied to other fine-grained soils. Using a sizable independent database of dissimilar fine-grained soils compiled from the research literature, it is conclusively shown that, contrary to the Authors’ assertions, their proposed correlations generally produce poor LL and PL predictions when employed beyond the calibration soil types. This outcome is not unexpected, since the Authors’ data-driven correlations were deduced based on a specific dataset with limited diversity in terms of soil physico-chemical and mineralogical attributes. The article closes with a discussion of the plausible explanations for the poor applicability of the Authors’ correlations when apllied to dissimilar fine-grained soils.
Keywords:
11
Indexed In · Volume 176 / April 2025
Reply to: “Discussion: Determination of Atterberg Limits Using the Vane Shear Test Method [Bull. Min. Res. Exp. (2024) 174: 1–10]”
Authors: ABSTRACTThe main focus of the criticisms raised by O’Kelly and Soltani (2025) (hereafter referred to as discussers) to the authors’ article in Bulletin of Mineral Research and Exploration (174, 1-10) is to examine the veracity of the strength-based equations presented by Kayabalı et al. (2024). The discussers applied the predictive equations proposed by the authors to dissimilar soils in the two articles (Kayabalı et al., 2015a; Kayabalı et al., 2015b) published earlier by the lead author with his research group. The discussers showed that the predictive equations 6 and 7 given by Kayabalı et al. (2024) yield extremely high values of liquid limit (LL) and plastic limit (PL) when applied to dissimilar soils. Further, discussers argued that the approach proposed
by Kayabalı et al. (2024) led to erroneous results in determining soil classes.
Keywords:
No articles match your search.