RUSLE, Sediment Delivery, Zagros Thrust Zone, CN-SCS Curve, Dam Lifespan.
Abstract:
Soil degradation is a significant cause of topsoil loss; in most mountainous region watersheds, it leads to decreased agriculture productivity and reservoir storage. This study targeted calculating and mapping soil loss and sediment yield in the Lesser Zab watershed located between Iraq and Iran. The Revised Universal Soil Loss Equation (RUSLE) model was used to calculate the soil loss. A Digital Elevation Model of 30m, a Digital Soil map (1:500000), rainfall, and land cover were used to derive parameters. The soil loss rates are 58.1 and 0.1 tha-1yr-1. The total annual soil loss is 1037289 tonnes, of these 404512, covering 75% of Kanarwe river basin land. Most of these affected lands are in the eastern and middle part, which is below the FAOs standard allowable for tolerable soil erosion. Still, the rest covers 25 % of the basin in the west with a total annual soil loss equal to 632777 tonnes, above FAOs standard. The maximum and minimum sediment yield is 29 and 0.1 tha-1yr-1, respectively. Based on the statistical correlation coefficient, the most effective RUSLE parameters on sediment yield from high to low are topography 0.48, soil erodibility 0.38, and crop management 0.38.
Assessment of active tectonics based on GIS and statistical model: A case study of upper Alaknanda catchment (western Himalaya, India)
Authors:
Adrija RAHA, Mery BISWAS, Soumyajit MUKHERJEE
ABSTRACT
Due to continuing deformation of the Earth’s crust, degradation and aggradation processes, the upper part of the Alaknanda basin lying in the Garhwal Himalaya, India, is considered to be tectonically active. Active tectonics in this region made a considerable impact on the drainage system and the topographic expression. Using a digital elevation model (DEM) with a resolution of 30 m * 30 m and based on eight geomorphic indices [hypsometric integral (HI), drainage texture (Dt), asymmetry factor (AF), ruggedness number (Rd), valley floor width/height ratio (Vfw), lemniscate coefficient (k) and basin shape index (Bs)], we evaluated active tectonics. Application of Index of Active Tectonic (IAT) and clustering model disclose the sub-watersheds in the southern part covering watersheds 16, 17 and near Badrinath sub-watershed 4, 9 and 8 are tectonically highly active (Class-1, 1.500-1.781). Cluster analysis defines two prominent clusters of sub-watersheds: 2, 4,14 and 15 in cluster 1; and 6, 7, 8 and 18 in cluster 2. Cluster 1 includes sub-watersheds 2, 4, 14, 15, and 16 and very high, high, and moderate IAT magnitudes. Sub-watersheds 6, 7, 8, and 18 are included in Cluster 2, which has very high and high tectonic activity.
Keywords:
Geomorphic Indices, Index of Active Tectonics, Clustering, Himalayan Tectonics, Active Tectonics.
Magnetic anomalies and geological signatures in the Black Sea: a comprehensive study of the east and west basins
Authors:
İlkin ÖZSÖZ, Eşref AYLAN, Ceyhan Ertan TOKER
ABSTRACT
This study investigates the origin of the Black Sea, focusing on the East and West Black Sea basins. Data such as Curie Point Depth values, heat flow, bathymetry, Moho depth, sediment thickness, and magnetic depth estimation were analyzed to explore the region’s geological features. Correlations between these parameters were assessed for each basin, shedding light on their tectonic history and the influence of volcanic rocks. Thinner sedimentary covers enhanced the detectability of rocks with higher magnetic properties, while the interiors showed lower magnetic anomalies due to younger sedimentary rocks. Edge detection techniques, like tilt angle and Local Wavenumber methods, improved magnetic data interpretation. The study computed Curie Point Depth and heat flow using 65 blocks, revealing greater depths in the Western Black Sea (up to 32 km) compared to the Eastern Black Sea (24-28 km). Two profiles (A-A’ and B-B’) were examined for further insights. Overall, this study provides valuable insights into the geological evolution of the Black Sea basins.
Keywords:
Curie Point Depth, Heat Flow, Tilt Derivative, Local Wavenumber, Correlation Plot.
Sediment thickness in the Thrace Basin estimated from the three-dimensional inversion of magnetotelluric data
Authors:
Cemal KAYA, Ahmet Tuğrul BAŞOKUR
ABSTRACT
The time-variation of the magnetotelluric (MT) fields was recorded at 37 measurement stations in the Thrace Basin (North-western Türkiye) by a remote-reference MT system that records the MT data in two frequency bands allowing a data acquisition between 320–7.5 Hz and 6–0.00055 Hz, respectively. The measurement stations were located from the Aegean Sea to the Black Sea seashores along a 207 km profile in the southeast-northwest direction. Three-dimensional inversion of MT data outlined the main geological elements of the region, the interface between sedimentary cover and basement rocks. The total thickness of the sedimentary layers in the basin is interpreted using the inflection and deflection points of the three-dimensional resistivity model in the vertical direction.