It is not often easy to distinguish the components of the mantle originated heat flow and radiogenic heat generation from each other. Surface heat flow is composed of two components. The first is the radiogenic heat source and the second is the heat flow originated from the upper mantle and the lower crust. In this study, heat flow and the radiogenic heat production of the Kýrþehir Massif and its geological sources were investigated. Curie point depths were calculated from aeromagnetic data. Geothermal gradient values were formed by considering the medium as homogenous and isotropic. The heat flow of the region was calculated using the heat transfer values of rock samples collected from field and it was determined that this value had ranged between 53 mWm-2 and 108 mWm-2. As a result of the evaluation of heat flow and heat production maps together, it was calculated that 60-92% of the average heat flow values of the region are mantle and 8-38% are radiogenic sourced. The radiogenic heat production in the study area, generally showed high anomaly values in young granitoids as predicted.
Metallic mineral deposits · Volume 178 / December 2025 · Pages: 95-112
Emre YILDIZ, Ebru COŞKUN KAVUKÇU, Yurdal GENÇ
Indexed In · Volume 178 / December 2025
The Uzunpınar (Boztepe-Kırşehir) Zn-Pb±Cu mineralization: A metamorphosed SEDEX-type mineralization in the Kırşehir Massif
Authors:
Emre YILDIZ, Ebru COŞKUN KAVUKÇU, Yurdal GENÇ
ABSTRACT
The Uzunpınar (Boztepe-Kırşehir) Zn-Pb±Cu mineralization is hosted within the gneiss and marbles of Paleozoic Kalkanlıdağ Formation of the Central Anatolian Crystalline Complex. The rocks observed in the mineralization area are mica gneiss, marble, migmatite, and microgranite, which were formed through high-grade metamorphism and anatexis of pelitic and carbonate protoliths. The mineralization has a stratiform geometry which extends approximately 1,850 m in a NE-SW direction. Six distinct mineralization levels (horizons), exhibiting similar characteristics and thicknesses ranging from 3.1–32.10 m, have been identified hosted within gneisses and marbles. These levels comprise ore bands and disseminations with thicknesses of 0.1–8 cm, aligned parallel to the foliation. Ore minerals are sphalerite, galena, chalcopyrite, and minor scheelite, while gangue minerals are pyrite, marcasite, pyrrhotite, gahnite, and Bafeldspar. In the Uzunpınar mineralization, the alignment of ore bands with the host rock foliation, the presence of coarse-grained euhedral opaque minerals, foam textures, gahnite, Ba-feldspar,
and the high Fe content in sphalerites serve as evidence for the influence of metamorphism on the mineralization. The stratiform geometry, syngenetic origin, and metal and mineral paragenesis suggest a SEDEX origin for the mineralization, later metamorphosed together with its host rocks.
Magnetic anomalies and geological signatures in the Black Sea: a comprehensive study of the east and west basins
Authors:
İlkin ÖZSÖZ, Eşref AYLAN, Ceyhan Ertan TOKER
ABSTRACT
This study investigates the origin of the Black Sea, focusing on the East and West Black Sea basins. Data such as Curie Point Depth values, heat flow, bathymetry, Moho depth, sediment thickness, and magnetic depth estimation were analyzed to explore the region’s geological features. Correlations between these parameters were assessed for each basin, shedding light on their tectonic history and the influence of volcanic rocks. Thinner sedimentary covers enhanced the detectability of rocks with higher magnetic properties, while the interiors showed lower magnetic anomalies due to younger sedimentary rocks. Edge detection techniques, like tilt angle and Local Wavenumber methods, improved magnetic data interpretation. The study computed Curie Point Depth and heat flow using 65 blocks, revealing greater depths in the Western Black Sea (up to 32 km) compared to the Eastern Black Sea (24-28 km). Two profiles (A-A’ and B-B’) were examined for further insights. Overall, this study provides valuable insights into the geological evolution of the Black Sea basins.
Keywords:
Curie Point Depth, Heat Flow, Tilt Derivative, Local Wavenumber, Correlation Plot.
Metin BEYAZPİRİNÇ, Ali Ekber AKÇAY, Mustafa Kemal ÖZKAN, Meftun Kerem SÖNMEZ, Mustafa DÖNMEZ
Indexed In · Volume 167 / 2022
The new age data and pre-Paleogene stratigraphy of the Kırşehir Massif, Central Anatolia
Authors:
Metin BEYAZPİRİNÇ, Ali Ekber AKÇAY, Mustafa Kemal ÖZKAN, Meftun Kerem SÖNMEZ, Mustafa DÖNMEZ
ABSTRACT
The metamorphics belonging to the Kırşehir Massif, which form the pre-Paleogene basement units in Central Anatolia around Kırşehir, are formed from bottom to top by conformable and transitional Late Devonian Kalkanlıdağ, Carboniferous-Early Permian Kervansaray and Late Permian Bozçaldağ formations and by the unconformably overlying Triassic Demirtepe and Jurassic- Cretaceous Saytepe formations. The sedimentation age of 237 Ma were obtained from the clastic zircons in the quartzites of the Demirtepe formation by the U/Pb method, and the metamorphism age ranges from 94.5 Ma and 83.7±3.3 Ma from the metabasites from the Whole Rock by the 40Ar/39Ar method. The Kasımağa and Sırataşlar formations within the Çiçekdağı Nappe belonging to the northern branch of Neotethys, which were tectonically emplaced over these units and the Turonian- Santonian Kargınkızıközü formation, which were the product of ensimatic island arc magmatism, were distinguished. The metamorphics and the Central Anatolian plutonic rocks, which cut the overlying ophiolitic rocks, were differentiated according to their composition, origin and age, and ranges from 71.9±1.7 Ma from the Baranadağ pluton; ranges from 84.0±1.9 Ma and 71.9±7.2 Ma from the Çayağzı pluton; ranges from 69.1±1.2 Ma by the40Ar/39Ar method, and 65.3±1.1 Ma were obtained from the Buzlukdağı pluton by the U/Pb method. The age ranges from 79.1±1.2-68.2±1.2 Ma and 74.5 Ma were obtained from the whole rock by 40Ar/39Ar method from trachyandesites belonging to the Kötüdağ volcanics, which are surface-semi-depth rocks of granite, monzonite and syenite composition plutonic rocks. The cover units overlie all these units with an angular unconformity. https://doi.org/10.19111/bulletinofmre.930051
Keywords:
Kırşehir Masifi, Çiçekdağı napı, Orta Anadolu plütonik kayaları, stratigrafi
SOME STRUCTURAL CHARACTERISTICS OF AZMAR ANTICLINE - NE IRAQ
Authors:
Ibrahim Saad I. AL-JUMAILY, Hadeer Ghazi M. ADEEB
ABSTRACT
The purpose of this study is to elucidate the structural style of Azmar structure, a major anticlinorium within the imbricate partition of Zagros fold-thrust belt in northeastern Iraq. Structural analysis of this anticlinorium demonstrated that it consists of four main NNW-SSE trending anticlines. They are imbricated SW ward through NE dipping reverse faults merge to a deep seated detachment. Furthermore, analysis of minor folds on hinge and limbs of the main Azmar anticline revealed the versatile style of such minor folds and their opposing vergencies. These features emphasize the role of faulting in development of the major fold and the minor folds. This interpretation has been supported by hinge angularity, as well as by association of hinge and limb disrupting reverse slip mesofaults with those minor folds. Therefore a progressive fault related folding is proposed for Azmar structure in this work.
The study area includes Belemedik and its vicinity located in the eastern part of Ecemiþ Fault Zone which constitutes the boundary between Central and Eastern Taurides.The area generally presents Belemedik Sequence belonging to Aladað Unit, Ophiolithic Melange and ophiolithic rocks belonging to Bozkýr Unit and Tertiary sediments overlying all these units. Within Belemedik Sequence, Late Devonian aged Küçükali, Carboniferous aged Belemedik, Early Permian aged Sarýoluk, Late Permian aged Kýzýlgeriþ and Yellice, EarlyMiddle Triassic aged Katarasý, Middle-Late Triassic aged Sarýyarma, Jurassic-Cretaceous aged Çamlýk and Yavça Formations were differentiated. In the previous studies on the vicinity of Belemedik, it was suggested that an incomplete Mesozoic series overlaying the Palaeozoic core and as a result of the erosion of this cover, a tectonic window was exposed. However, in this study, it was demonstrated that a complete Mesozoic series of Early Triassic-Late Cretaceous age overlaying the Palaeozoic rocks in the vicinity of Belemedik are presented and hence a tectonic window does not exist in the vicinity of Belemedik. In addition, it was determined that Belemedik Sequence displayed similar features with the rock associations of Aladað Unit in terms of lithological properties and the ages of the units it comprises. In the region, at the bottom of the Bozkýr Unit, which tectonically overlies the Belemedik Sequence, Late Senonian aged Kýzýlcadað Ophiolithic Melange and olistostrome are present. And, at the top of the Bozkýr Unit, Late Cretaceous aged Pozantý-Karsantý Ophiolithic Nappe is located. While the Pozantý-Ecemiþ Corridor formed by Ecemiþ Fault Zone is represented by Oligocene-Miocene aged units, the Adana Basin is represented by Paleocene-Late Miocene units.
Keywords:
Belemedik Sequence, Tectonostratigraphy, Aladağ Unit, Pozantı, Taurides
THE USE OF TILT ANGLE IN GRAVITY AND MAGNETIC METHODS
Authors:
UĞUR AKIN, Betül IŞIKDENİZ ŞERİFOĞLU, Mehmet DURU
ABSTRACT
Tilt angle method, which has been recently used in investigating the boundaries of structures, reveals useful information on deep and shallow structures. Tilt angle is expressed as the arctan value of the ratio of the vertical derivative of the potential field to its horizontal derivative. The method was applied to Kýrþehir-Ý31 Sheet. As a result, the presence of volcanites buried under terrestrial sediments was demonstrated.