Steel Barrier, Rockfall Inventory Map, Rocpro3D, Three Dimensional Rockfall Analysis.
Abstract:
The central district campus of Gümüşhane, located on the Trabzon-Erzurum Highway, has a steep topography, and because of the effect of climatic and morphological structure, frequent rockfall events can cause loss of life and property from time to time. For these reasons, the slopes in some parts of the Oltanbey and Hasanbey districts of the central district of Gümüşhane, which pose a great threat in terms of rockfall potential, were chosen as the study area. In this study, three-dimensional rockfall analyzes were carried out using the RocPro3D program on the lines determined in the rockfall source zones with a high probability of rockfall. As a result of the analysis, it was determined that the rock blocks rolled from the O1, O2 and H1 source rock lines determined at the upper elevations of the study area threaten the settlements and road networks in Oltanbey and Hasanbey districts. With the 3D rockfall analysis, steel barrier was applied as a precautionary structure in the areas determined to be under the risk of rockfall, and the analyzes were carried out again considering the precautionary structures. By examining the results of the analyzes, the safest and most economical different barrier types have been proposed to eliminate the danger of rockfall.
Some thoughts on the morphotectonic development of the Denizli region
Authors:
Yücel YILMAZ
ABSTRACT
The Denizli region is located to the east of the Buldan Horst. Although they follow the same trends as the Büyük Menderes and Gediz grabens, the Denizli region has undergone semi-independent evolution during the Quaternary. The essential morphotectonic elements of the area are the Denizli Basin and the surrounding Babadağ and the Güzelpınar Horsts. The Babadağ Horst is the most distinct morphotectonic element of the region. It is bounded in the north by the Denizli fault, a listric normal fault, and possibly a major detachment fault. The Laodicea and Güzelpınar Horsts located within the downthrown block of the fault may be regarded as antithetic structures.
https://doi.org/10.19111/bulletinofmre.1146674
Güzin Gülsev UYAR AKSOY, Cemalettin Okay AKSOY, Hasan Eray YAMAN
Indexed In · Volume 169 / 2022
Estimation of blast vibrations by numerical modelling and signal analysis
Authors:
Güzin Gülsev UYAR AKSOY, Cemalettin Okay AKSOY, Hasan Eray YAMAN
ABSTRACT
Seismic waves carry all the geological and geotechnical characteristics of the units they pass along the route they travel on. Therefore, seismic waves can be called the signature of the route it passes through. If the blasting point is considered as source, blast-induced seismic waves measured at a certain distance from the source can be revealed and this form can be integrated into the dynamic numerical model, the effects that will occur at any point of the model can be predicted. In this study, seismic waves induced from single-hole blast and a group blast consisting of holes with the same characteristics as a pilot blast hole were obtained using particle velocity data obtained from seismographs at certain distances and integrated into the numerical model. The data processing technique used is to estimate the theoretical group blasting data from the pilot data according to the linear superposition principle and compare with the real group blasting data to determine the nonlinear behavior effect on the blast source from the difference. When the results were examined, it was observed that the numerical model results and field measurements coincided. The results of this study will make a significant contribution to the science of rock engineering.
https://doi.org/10.19111/bulletinofmre.1066943
Ayça ÇIRMIK, Ufuk AYDIN, Oya ANKAYA PAMUKÇU, Fikret DOĞRU
Indexed In · Volume 169 / 2022
Analysis of the stress distribution of North Anatolian Fault Zone for the part between Amasya-Tokat cities
Authors:
Ayça ÇIRMIK, Ufuk AYDIN, Oya ANKAYA PAMUKÇU, Fikret DOĞRU
ABSTRACT
Tectonic forces formed in the continental crust, cause permanent changes in stress, compression and deformation. The amplitudes of earthquake waves vary with the stress/strain distribution in the crust. In this study, the change of stress / strain and regional absorption coefficient, which is effective in tectonic forces caused by elastic deformation energy accumulating in the brittle crust over time, was investigated. The study area is the middle part of the North Anatolian Fault Zone and the area formed by Ezinepazarı fault zone and Merzifon fault zone. In this area, Coulomb stress analysis was carried out by using the focal mechanism solution values of the earthquake that occurred in Yoldere-Erbaa, Tokat on October 9, 2015 (ML=5.1). In order to examine the deformation caused by this earthquake in and around the study area, Global Navigation Satellite System (GNSS) data were evaluated and the velocities of these stations were calculated using GNSS data of these stations for the years 2013-2014-2015-2016. Also, regional absorption coefficients were determined by using earthquake data. As a result, Coulomb stress analysis results, velocity values distribution obtained from GNSS data and absorption findings obtained from seismological study were evaluated together.
https://doi.org/10.19111/bulletinofmre.1022323