Selçuk ALEMDAĞ, Rasim Taylan KARA, Hasan Tahsin BOSTANCI
Indexed In · Volume 169 / 2022
Evaluation of potential rock falls with three-dimensional analysis: Example of Oltanbey and Hasanbey districts (Gümüşhane city center)
Authors:
Selçuk ALEMDAĞ, Rasim Taylan KARA, Hasan Tahsin BOSTANCI
ABSTRACT
The central district campus of Gümüşhane, located on the Trabzon-Erzurum Highway, has a steep topography, and because of the effect of climatic and morphological structure, frequent rockfall events can cause loss of life and property from time to time. For these reasons, the slopes in some parts of the Oltanbey and Hasanbey districts of the central district of Gümüşhane, which pose a great threat in terms of rockfall potential, were chosen as the study area. In this study, three-dimensional rockfall analyzes were carried out using the RocPro3D program on the lines determined in the rockfall source zones with a high probability of rockfall. As a result of the analysis, it was determined that the rock blocks rolled from the O1, O2 and H1 source rock lines determined at the upper elevations of the study area threaten the settlements and road networks in Oltanbey and Hasanbey districts. With the 3D rockfall analysis, steel barrier was applied as a precautionary structure in the areas determined to be under the risk of rockfall, and the analyzes were carried out again considering the precautionary structures. By examining the results of the analyzes, the safest and most economical different barrier types have been proposed to eliminate the danger of rockfall.
https://doi.org/10.19111/bulletinofmre.977928
Keywords:
Steel Barrier, Rockfall Inventory Map, Rocpro3D, Three Dimensional Rockfall Analysis.
THE IMPORTANCE OF AMOUNT OF SETTLEMENT IN DETERMINING THE BEARING CAPACITY OF SOILS
Authors:
SELÇUK ALEMDAĞ, Aslıhan CİNOĞLU, Elif GACENER
ABSTRACT
In this study, it is aimed to determine safe bearing capacity of soils, which are out cropped around Tamzi and Akcakale villages located in Gumushane, providing allowable settlement conditions for an optimum foundation design. To define the geotechnical properties of soils, three trenches were dug and two seismic refraction with two Multichannel Spectral Analysis of Surface Waves (MASW) were carried out in each research area. Sieve analyses, shear box tests, triaxial compression tests were carried out on disturbed and undisturbed samples taken from the trenches. Seismic velocities of the soils are determined by seismic refraction and MASW methods. While determining the safe bearing capacity; the equations proposed by Terzaghi, Meyerhof, Kurtulus, Tezcan and Ozdemir, Turker, Keceli were used and the obtained safe bearing capacity values were compared to each other. After, the soils were modeled numerically by using finite elements method and safe bearing capacities providing allowable settlement conditions were determined. According to the results, safe bearing capacity values obtained from empirical equations are not satisfactory to have an optimum foundation design. For the optimum foundation design, safe bearing capacity should be accepted as 190 kN/m2 for clayey soil (CL) and 485 kN/m2 for the clayey sand (SC).