Uludağ Core Complex, North Anatolian Fault, Eskişehir Fault, Southern Marmara.
Abstract:
In the northern margin of Uludağ Massif in northwest Anatolia, the Bursa Detachment having topto- the north, northeast normal sense of shear separates the lower plate high-grade metamorphic rocks of Series-A (Uludağ Group) from the upper plate low-grade metamorphic rocks of Series-B (Karakaya Complex). The deeper section of Uludağ Massif is represented by the Oligocene metagranites at the southern parts of the massif that is exposed due to the youngest high-angle Soğukpınar normal fault. The massif is a typical extensional metamorphic core complex similar to the counterparts in the west and northwest Anatolia such as the Menderes, Kazdağ, and Çataldağ core complexes due to close timing of exhumation and a similar sense of shearing.
The Dodurga Fault is an active right-lateral strike-slip fault, approximately 63 km long, striking NW-SE in northwestern Anatolia. Based on 1:25,000-scale active fault mapping, the fault is subdivided into two principal geometric segments. Segment 1 is approximately 16 km long and extends from Sulhiye in the west to Erikli in the east, whereas Segment 2 is 47 km long and is characterized by a right-stepping geometry and a 10°-15° southeastern deflection. Geological and geomorphological observations, together with kinematic analyses, indicate that the fault is dominantly right-lateral strike-slip in character. Stream channels offset by up to several kilometers along the fault trace support its long-term activity, and fault-plane kinematic indicators independently confirm dextral motion. Paleostress analyses of the kinematic data indicate that the recent deformation phase along the Dodurga Fault is governed by approximately N-S contraction and E-W extension. Empirical scaling relationships suggest that Segment 1 and Segment 2 are capable of generating earthquakes of Mw 6.47 and Mw 6.97, respectively. If both segmentsrupture together, the Dodurga Fault could potentially generate an earthquake of Mw 7.16.
Structural Geology, Active tectonics · Volume 172 / December 2023 · Pages: 119-140
Ali KOÇYİĞİT
Indexed In · Volume 172 / December 2023
Neotectonics of the Sarıköy-İnova and Çan-Bayramiç-Ezine fault zones: basin formation, age and slip rates, NW Anatolia-Türkiye
Authors:
Ali KOÇYİĞİT
ABSTRACT
The Sarıköy-İnova and the Çan-Bayramiç-Ezine fault zones (SIFZ, ÇBEFZ) comprise the southern strand of the North Anatolian Fault System in the Biga Peninsula. They are located in the area between Sarıköy to northeast and the Dalyan settlement around Bozcaada in the North Aegean Sea to southwest. Both of the fault zones are active. This is evidenced by the 6 March 1737 (Ms =7.0) İnova, 1st February 1809 Hurma (Ms = 6.1), and the 8 February 1826 Güllüce (Ms = 6.2) historical earthquakes resulted from these fault zones. Maximum lengths of fault segments comprising the SIFZ and the ÇBEFZ are 14 km and 15 km, respectively. Based on the maximum lengths of fault segments, the magnitude of the peak earthquakes to be originated from these faults are Mw = 6.3 and 6.6, respectively. Based on both the geological and geographic markers, the total right lateral offsets accumulated on the SIFZ and ÇBEFZ are 12 km and 20 km, respectively. These offset values imply to the slip rates of 4.6 mm/yr and 7.7 mm/yr, respectively. Five pull-apart basins were developed on both fault zones. These are the Sarıköy, İnova, Kazabat, Çan and Ezine-Bayramiç basins. The first three of them are pure strike-slip pull-apart basins, while the type of the rest basins is superimposed. The angular unconformity between the nondeformed basin fill of Quaternary age and the folded to thrust-faulted basement rocks of pre-Quaternary age reveals strongly that the pull-apart basins have formed during the Quaternary time. This relationship also reveals that the commencement age of the strike-slip neotectonic regime and formation of associated fault zones are the Early Quaternary. This work was dedicated to the retirement memory of Dr. Fuat Şaroğlu.
Ayça ÇIRMIK, Ufuk AYDIN, Oya ANKAYA PAMUKÇU, Fikret DOĞRU
Indexed In · Volume 169 / 2022
Analysis of the stress distribution of North Anatolian Fault Zone for the part between Amasya-Tokat cities
Authors:
Ayça ÇIRMIK, Ufuk AYDIN, Oya ANKAYA PAMUKÇU, Fikret DOĞRU
ABSTRACT
Tectonic forces formed in the continental crust, cause permanent changes in stress, compression and deformation. The amplitudes of earthquake waves vary with the stress/strain distribution in the crust. In this study, the change of stress / strain and regional absorption coefficient, which is effective in tectonic forces caused by elastic deformation energy accumulating in the brittle crust over time, was investigated. The study area is the middle part of the North Anatolian Fault Zone and the area formed by Ezinepazarı fault zone and Merzifon fault zone. In this area, Coulomb stress analysis was carried out by using the focal mechanism solution values of the earthquake that occurred in Yoldere-Erbaa, Tokat on October 9, 2015 (ML=5.1). In order to examine the deformation caused by this earthquake in and around the study area, Global Navigation Satellite System (GNSS) data were evaluated and the velocities of these stations were calculated using GNSS data of these stations for the years 2013-2014-2015-2016. Also, regional absorption coefficients were determined by using earthquake data. As a result, Coulomb stress analysis results, velocity values distribution obtained from GNSS data and absorption findings obtained from seismological study were evaluated together.
https://doi.org/10.19111/bulletinofmre.1022323
Some thoughts on the morphotectonic development of the Denizli region
Authors:
Yücel YILMAZ
ABSTRACT
The Denizli region is located to the east of the Buldan Horst. Although they follow the same trends as the Büyük Menderes and Gediz grabens, the Denizli region has undergone semi-independent evolution during the Quaternary. The essential morphotectonic elements of the area are the Denizli Basin and the surrounding Babadağ and the Güzelpınar Horsts. The Babadağ Horst is the most distinct morphotectonic element of the region. It is bounded in the north by the Denizli fault, a listric normal fault, and possibly a major detachment fault. The Laodicea and Güzelpınar Horsts located within the downthrown block of the fault may be regarded as antithetic structures.
https://doi.org/10.19111/bulletinofmre.1146674
Bekir BAŞKURT, Mete Tayhan SERDENGEÇTİ, Kaan ÖZÇELİK, Hüseyin BAŞTÜRKCÜ
Indexed In · Volume 169 / 2022
Recovery of Cu-Ce from copper slag by using flotation and chemical methods
Authors:
Bekir BAŞKURT, Mete Tayhan SERDENGEÇTİ, Kaan ÖZÇELİK, Hüseyin BAŞTÜRKCÜ
ABSTRACT
In our days, slags are considered secondary resources due to the metals they contain. Copper slags having economical operating grades in terms of Zn, Cu, Ce, Ni, Co, Mo, and V, have complex mineralogy due to their thermal processing based formations. Methods of recovery for copper and other precious metals from slags, have been studied, and for which, flotation plants in industrial scale are operated. In cases where physical or physico-chemical mineral processing methods are not sufficient, hydrometallurgical methods are applied. In this study, the flotation method was applied to a copper slag with 0.9% Cu grade. Copper recovery and the concentration grade were determined to be approximately 40 and 22.7% Cu, respectively. Metal extractions were examined through direct leaching tests. Using H2SO4 in the leaching, resulted in gel formation, leading to an investigation of the leach parameters using HCl. Cu and Ce extractions of around 70-80% were attained as a result of a test performed for 2 hours with the addition of 25 g/L H2O2 at a rate of 20-25% solids and 300 g/L HCl concentration. An examination of the metal relations, indicated that the dissolution behavior of Cu and Ce was quite similar to the Al dissolution (R2=0.9).
https://doi.org/10.19111/bulletinofmre.1139294
Oya PAMUKÇU, Ayça ÇIRMIK, Fikret DOĞRU, Ece ÜNLÜ, Barış Can MALALİÇİ
Indexed In · Volume 169 / 2022
Assessment of crustal thinning and tectonic stress distribution of Gülbahçe fault zone and its surroundings (İzmir, West Türkiye) using gravity and magnetic anomalies
Authors:
Oya PAMUKÇU, Ayça ÇIRMIK, Fikret DOĞRU, Ece ÜNLÜ, Barış Can MALALİÇİ
ABSTRACT
Gülbahçe Fault Zone (GFZ) is a significant tectonic structure and seismic source for İzmir city and its surroundings. The major earthquakes occurred at the surroundings of GFZ are 2005 Seferihisar, 2020 Samos Island-Aegean Sea and 2021 Seferihisar earthquakes. In this study, the crustal thinning and tectonic stress distribution of GFZ and its surroundings were analyzed by using the new gravity and magnetic data. The correspondence analysis was applied by appraising together the magnetic and free-air anomaly data. Moreover, the average density of the subsurface structure was calculated by applying the Parasnis method. The deviatoric stress calculation was executed and the change of the physical properties that controls the gravity and magnetic anomaly of the crustal structure of the GFZ and its surroundings from north to south was investigated. Therefore, the average density values, which were obtained from gravity anomalies, were computed as 2.59 gr/cm3 in the north of the study region and it decreased to 2.06, 1.8 and 1.49 gr/cm3 towards to the south. The freeair gravity anomaly values were between 0-70 mGal and the magnetic anomalies were between -450-150 nT. The deviatoric stress values were between -0.2-0.1 MPa.
https://doi.org/10.19111/bulletinofmre.1029265