Natural stone, Freezing and thawing, Water absorption, Thermalmechanical behavior, Uniaxial compressive strength.
Abstract:
In the study, the changes in the mechanical properties of the natural stone samples, which had been obtained from different regions of Turkey, before and after the freeze-thaw test were examined. Within the scope of the study, 17 different natural stone samples were used and, after chemical and mineralogical-petrographical properties were determined. Water absorption at atmospheric pressure, real density, porosity, and uniaxial compressive strength tests were performed before and after freezing-thawing. The freezing and thawing test has been performed using TS EN 12371 standard from -12 °C to +20 °C in 56 cycles (2 cycles = 24 hours). After the test, the samples were subjected to uniaxial compressive strength test in order to identify the changes of the compressive strength values. The results of the physical and mechanical tests on these samples were evaluated by grouping according to chemical and mineralogical-petrographical properties of natural stones. It was aimed to determine which natural stone samples are resistant to freeze-thaw, and can be used in external cladding applications according to the findings obtained from the study.
Investigation of the change in the characteristic properties of epoxy and silane coated natural stone surfaces
Authors:
Zehra Ebru SAYIN, Hakan ÇİFTÇİ, Mustafa GÜRSOY
ABSTRACT
Travertine is a natural stone with macro and micropores; these pores are connected by capillary means. Their visual appearance and porous structure add a different style and diversify their usage areas. However, the large pore structure of travertine brings some limitations in determining the usage areas. In the study, protective solutions called silane and epoxy, which provide protection against water, were used to prevent and/or minimize decomposition in areas of use, depending on the porosity of the travertine, and their effects on travertine were compared. Treatment of both chemicals separately on the travertine surface was carried out by spraying, applying with a brush, and dipping into chemicals. With the findings obtained from the physical examinations after curing, the work continued using the applying and dipping method. The dipping method was evaluated with the chemical’s 10, 20, and 40-minutes waiting times. The study found that the best application condition was chemical immersion for 10 minutes. However, in SO2 wear experiments, it was understood that surfaces treated with epoxy were more durable due to the high viscosity of the chemical. As a result, it has been determined that silane application provides more effective surface protection results than epoxy.
Investigation of thermal transformation of composite material obtained from granite and recrystallized limestone natural stone wastes.
Authors:
Gökhan EROL, Devrim PEKDEMİR
ABSTRACT
In this study, the usability of granite (magmatic) and recrystallized limestone (metamorphic) natural stone wastes as alternative raw materials in ceramic tile production was investigated. Based on the CaO, SiO2, and Al2O3 compounds found in waste powders, mixtures containing 65% granite and 35% recrystallized limestone (by mass) were prepared to obtain the ceramic phases of gehlenite, wollastonite and anorthite as a result of thermal transformation. The grain size of both raw materials is -149 μm (d90 = 110.957 μm). The first series samples are called natural building stone (DYT), and the second series samples, in which wood chips of 2% (by mass) -1 mm grain size are added to obtain porous material, are called natural building stone - porous (DYT-G). The samples belonging to both series was applied heat treatment at 1,160°C. Phase analysis of samples obtained after heat treatment was measured by X-Ray Diffraction (XRD) and Scanning Electron Microscope (SEM-EDS) methods, and sintering properties were measured using water absorption coefficient, flexural strength, modulus of elasticity, density-porosity and color measurement tests. Gehlenite and wollastonite phases were detected in the heat treated samples, but no anorthite phase was observed. According to the test results, it was determined that the flexural strength (22.64 MPa) of the DYT marked sample was in accordance with the ceramic tile standards. In the DYT-G example, despite the decreasing unit volume mass value, it was determined that the bending strength (16.50 MPa) was in the range of ceramic tile strength values.
https://doi.org/10.19111/bulletinofmre.1081187
Investigation of thermal and mechanical behavıors of construction materials obtained from some natural stone waste
Authors:
Gökhan EROL, Devrim PEKDEMİR
ABSTRACT
In this study, thermal and mechanical behaviours of composite building materials obtained from different kinds of natural stone wastes were investigated. First of all, XRD, chemical and grain size distribution analyses were carried out to identify the natural stone wastes to be used. 60% granite (magmatic), 35% recrystallized limestone (metamorphic) and 5% pure aluminium oxide (Al2O3) materials were used in the prepared mixture. The prepared mixture was shaped in a steel mould 75x20x50 mm in size by adding 7% shaping water and fired at 1140 ° C, 1150 ° C and 1160 ° C. Following that XRD analyses, colour determination, water absorption coefficient, bending strength, Young’s Modulus, bulk density, apparent density and open porosity tests were performed on the samples. According to the XRD analyses results gehlenite, anorthite and wollastonite phases were detected. In accordance with the results of other experiments and analysis, it was found that bending strength, Young’s Modulus and mass density values have increased, but on the other hand water absorption coefficient, apparent density and open porosity values had decreased after the firing process.
DOI: 10.19111/bulletinofmre.428318
An approach for the application of energy-based liquefaction procedure using field case history data
Authors:
Kamil KAYABALI, Levent SELCUK, Turgay BEYAZ
ABSTRACT
This paper presents an overview to the applicability of the “energy-based liquefaction approach” with regards to the new developments in the subject. The method involves comparing the strain energy for the soil liquefaction (capacity) with the strain energy imparted to the soil layer during an earthquake (demand). The performance of the method was evaluated by using a large database of SPT-based liquefaction case history. The energy-based method and the more commonly used stressbased method were compared in their capability to assess liquefaction potential under the same damaging historic earthquakes and geotechnical site conditions. In the procedure, the predictive strain energy equations were used to estimate the capacity energy values. These empirical equations have been developed based on the initial effective soil parameters. As for the energy of any given strong ground motion, it was computed from a velocity-time history of the ground motion and the unit mass of soil through utilization of kinetic energy concepts. The proposed energy-based method has effective way in evaluating the liquefaction potential based on the seismological parameters, contrary to the stress-based approach, where only peak ground acceleration (PGA) is considered.
https://doi.org/10.19111/bulletinofmre.677626
Keywords:
Soil liquefaction, Energybased liquefaction method, Field case histories, Earthquake.
2D and 3D structural boundaries of the tectonic composition of the Anatolia and surrounding seas using by the gravity (Satellite Data): Eastern Mediterranean
Authors:
Ceyhan Ertan TOKER
ABSTRACT
Gravity data is processed and the problems of the earth are examined. The density of the data can be arranged to solve detail, semi-detail and regional problems. Here, the gravitational data obtained by processing the linearity of the 2D and 3D visuals in terms of plate size large wavelength structures are examined. 2D linearities determine important stress areas but they are affected at different rates with respect to the spatial distribution of source effect. Due to grid formation, these boundaries are affected at different rates from less dense and very dense structures. Different wavelengths in structure boundary analysis; derivative and phase elements and filters. Vertical change in 3D analysis can be made at the approach level with the analytical examination of 2D change. At this stage, the distribution of source effect and depth model structure parameters are calculated. When examining large wavelength structures, some of the buried structures appear due to cover removal. In search of solutions for tectonic structures that we may miss; The tectonic components that need to be confirmed in the Eastern Mediterranean have been tried to be elucidated in this study. 3D building solutions are important in this respect.
https://doi.org//10.19111/bulletinofmre.641237
Keywords:
Gravity, Filter, Standart deviation, Long wavelength, East mediterranean, 2D, 3D.
The relationship of soils developed on different parent materials in Niğde province with lithological units and determination of their suitability for usage agricultural purposes
Authors:
Harun TORUNLAR, Abdurrahman LERMİ, Emin ÇİFTÇİ
ABSTRACT
In this study, general characteristics of soils formed on different parent materials in three different regions of Niğde province, their relationship with lithological units and the extent to which they are suitable for agricultural purposes were determined. Physical and chemical analysis values of rock and soil samples were used to reveal the relationship between lithological units and soils formed in the study area and correlation analysis was applied among the parameters. Multi Criteria Decision Making method was used to determine the suitability of these soils which are formed depending on the parent materials for agricultural use. In order to determine the effect rates among the main criteria of soil, topography, climate and geology and their sub criteria, Analytical Hierarchy Process of Multi Criteria Decision Making method was applied. According to this; Depending on the influence of the lithological units, the soils developed around Bor district are of basic character and the soils developed in Çiftlik and Gölcük districts and their vicinity are more acidic reaction. In addition, it has been determined that the soils of the Çiftlik district and its vicinity are developed by accumulation and in situ, while the soils around Gölcük and Bor districts are developed in situ. In determining the suitability of soils for agricultural use, it was calculated that the main criteria of geology was 5.5% and the criteria of lithological units, which is the sub-criterion of this, was 2.7% effective.
https://doi.org/10.19111/bulletinofmre.742137
Keywords:
Lithological units, Soil, Multi criteria decision making method.