Investigation of thermal transformation of composite material obtained from granite and recrystallized limestone natural stone wastes.
Authors:
Gökhan EROL, Devrim PEKDEMİR
ABSTRACT
In this study, the usability of granite (magmatic) and recrystallized limestone (metamorphic) natural stone wastes as alternative raw materials in ceramic tile production was investigated. Based on the CaO, SiO2, and Al2O3 compounds found in waste powders, mixtures containing 65% granite and 35% recrystallized limestone (by mass) were prepared to obtain the ceramic phases of gehlenite, wollastonite and anorthite as a result of thermal transformation. The grain size of both raw materials is -149 μm (d90 = 110.957 μm). The first series samples are called natural building stone (DYT), and the second series samples, in which wood chips of 2% (by mass) -1 mm grain size are added to obtain porous material, are called natural building stone - porous (DYT-G). The samples belonging to both series was applied heat treatment at 1,160°C. Phase analysis of samples obtained after heat treatment was measured by X-Ray Diffraction (XRD) and Scanning Electron Microscope (SEM-EDS) methods, and sintering properties were measured using water absorption coefficient, flexural strength, modulus of elasticity, density-porosity and color measurement tests. Gehlenite and wollastonite phases were detected in the heat treated samples, but no anorthite phase was observed. According to the test results, it was determined that the flexural strength (22.64 MPa) of the DYT marked sample was in accordance with the ceramic tile standards. In the DYT-G example, despite the decreasing unit volume mass value, it was determined that the bending strength (16.50 MPa) was in the range of ceramic tile strength values.
https://doi.org/10.19111/bulletinofmre.1081187
A laboratory-scale investigation on freezing-thawing behavior of some natural stone samples manifactured in Turkey
Authors:
Gökhan EROL, Ozan BAYRAM
ABSTRACT
In the study, the changes in the mechanical properties of the natural stone samples, which had been obtained from different regions of Turkey, before and after the freeze-thaw test were examined. Within the scope of the study, 17 different natural stone samples were used and, after chemical and mineralogical-petrographical properties were determined. Water absorption at atmospheric pressure, real density, porosity, and uniaxial compressive strength tests were performed before and after freezing-thawing. The freezing and thawing test has been performed using TS EN 12371 standard from -12 °C to +20 °C in 56 cycles (2 cycles = 24 hours). After the test, the samples were subjected to uniaxial compressive strength test in order to identify the changes of the compressive strength values. The results of the physical and mechanical tests on these samples were evaluated by grouping according to chemical and mineralogical-petrographical properties of natural stones. It was aimed to determine which natural stone samples are resistant to freeze-thaw, and can be used in external cladding applications according to the findings obtained from the study.
https://doi.org/10.19111/bulletinofmre.746486
Keywords:
Natural stone, Freezing and thawing, Water absorption, Thermalmechanical behavior, Uniaxial compressive strength.
Investigation of thermal and mechanical behavıors of construction materials obtained from some natural stone waste
Authors:
Gökhan EROL, Devrim PEKDEMİR
ABSTRACT
In this study, thermal and mechanical behaviours of composite building materials obtained from different kinds of natural stone wastes were investigated. First of all, XRD, chemical and grain size distribution analyses were carried out to identify the natural stone wastes to be used. 60% granite (magmatic), 35% recrystallized limestone (metamorphic) and 5% pure aluminium oxide (Al2O3) materials were used in the prepared mixture. The prepared mixture was shaped in a steel mould 75x20x50 mm in size by adding 7% shaping water and fired at 1140 ° C, 1150 ° C and 1160 ° C. Following that XRD analyses, colour determination, water absorption coefficient, bending strength, Young’s Modulus, bulk density, apparent density and open porosity tests were performed on the samples. According to the XRD analyses results gehlenite, anorthite and wollastonite phases were detected. In accordance with the results of other experiments and analysis, it was found that bending strength, Young’s Modulus and mass density values have increased, but on the other hand water absorption coefficient, apparent density and open porosity values had decreased after the firing process.
DOI: 10.19111/bulletinofmre.428318