Travertine is a natural stone with macro and micropores; these pores are connected by capillary means. Their visual appearance and porous structure add a different style and diversify their usage areas. However, the large pore structure of travertine brings some limitations in determining the usage areas. In the study, protective solutions called silane and epoxy, which provide protection against water, were used to prevent and/or minimize decomposition in areas of use, depending on the porosity of the travertine, and their effects on travertine were compared. Treatment of both chemicals separately on the travertine surface was carried out by spraying, applying with a brush, and dipping into chemicals. With the findings obtained from the physical examinations after curing, the work continued using the applying and dipping method. The dipping method was evaluated with the chemical’s 10, 20, and 40-minutes waiting times. The study found that the best application condition was chemical immersion for 10 minutes. However, in SO2 wear experiments, it was understood that surfaces treated with epoxy were more durable due to the high viscosity of the chemical. As a result, it has been determined that silane application provides more effective surface protection results than epoxy.
Neotectonics and geothermal potential of the East Anatolian Tectonic Block: A case study in Diyadin (Ağrı) geothermal field, NE Türkiye
Authors:
Ali KOÇYİĞİT
ABSTRACT
Diyadin is situated 71 km ESE of Ağrı nearby the Turkish-Iranian State border in the east Anatolian tectonic block. It is only one of several type localities of promising geothermal fields in eastern Anatolia. The neotectonic regime and related fault zones in the Eastern Anatolia are dominated by a strike-slip tectonic regime governed by a stress field state, in which the greatest principal compressive stress (σ1) is operating in NNW direction (N22°W) while the least principal stress axis (σ3) or extension direction is N68°E. This stress field state was proved once more by the tensor solution of the 12 June 2022 Akçift (Muradiye-Van) earthquake of Mw = 5.1. The strike-slip neotectonic regime started at the time of latest Pliocene-early Quaternary and then triggered the first occurrence of the fissure eruption along the NNW trending Kaletepe open fracture. This event was followed by the development of both the two-peaked Tendürek strato-shild volcano and the Diyadin geothermal field (DGF). The most common manifestations of the DGF are the active tectonic regime and related faults, active volcanoes, fumeroles, numerous hot water springs to artesian wells, widespread ironrich alteration zones, actively growing fissure-ridge travertines and the probable presence of the shallow-seated and unroofed hypabyssal felsic to intermediate intrusions of Quaternary age.
Keywords:
Diyadin Geothermal Field, Thermogene Fissure-ridge Travertine, Active Volcano, Active Strike-slip Tectonic Regime.
Porphyry and epithermal Au-Cu systems of the Southern Caucasus and Northern Iran
Authors:
Alexander G. TVALCHRELIDZE
ABSTRACT
This article presents tangible geological evidence for the coexistence of porphyry copper and epithermal gold systems within single polygenic deposits and provides a paleothermophysical model for their origins. A brief metallogenic analysis of the Southern Caucasus and Northern Iran has shown that such deposits are confined to long-living calc-alkaline island arcs and were formed during their orogenesis. Examples of complex Sonajil (Iran), Gharta, and Merisi (Georgia) deposits are considered. The investigation has shown that for combined porphyry and epithermal ore formation, some preconditions are suggested to exist: (i) a source of anomalous energy that exceeds the thermodynamics of the enclosing environment; (ii) the existence of a temperature gradient that determines conventional flows of fluids composed of endogenous and meteoric constituents (proven by rhythmical zoning of ore lodes); (iii) the stability of such conditions for a period of sulfide ore formation. However, such a process of sulfide ore formation cannot explain the formation of high sulfidation gold deposits. The precipitation of native gold requires phreatic collapse in the ore conduit channel, already after the formation of hydrothermally altered rocks, and this event results in the creation of either hydrothermal breccias often with jigsaw-fit texture or brecciated vuggy silica where host rocks and hydrothermally altered rocks are cemented by a gold-bearing quartz matrix.
Archaeoseismology: Earthquake traces studies in ancient settlements; a chronological evaluation from the World focusing on Türkiye
Authors:
Ökmen SÜMER, Volkan KARABACAK
ABSTRACT
Archaeoseismology is a field of science that investigates the remains of ancient human structures of destructive earthquakes that occurred in their ancient history and in this respect makes inferences on the possible effects of earthquakes whose origins will be may occurred in the future. Although many authors wrote the effects of ancient earthquakes in various periods, the first modern archaeoseismology studies in the world gain momentum starting from the end of the 19th century at the same time with Türkiye. In this understanding, the geography of Anatolia (Asia Minor), which has hosted a wide variety of cultural layers since its Mesolithic end, is an open-air research laboratory for modern archaeoseismological studies. This study is a reference work that summarizes the historical past of the discipline of archaeoseismology chronologically in the perspective of studies on Earth and Anatolia, presents suggestions about the future of archaeoseismology and is a literature summary for the new generation of archaeoseismologists.
Keywords:
Archaeoseismology, Archaeoseismologist, Ancient human structures, Chronological development, Anatolia.
Meeting freshwater demands in water-scarce regions is imperative, given challenges like hydric stress, urbanization, aridity, and population growth. This study focuses on the Tebessa aquifer system, a critical water source facing escalating demands. A primary objective is to identify actionable management strategies to improve groundwater quality dynamics in semi-arid regions. The methodology involves a comprehensive assessment of groundwater health using the Water Quality Index (WQI) approach. This method integrates diverse parameters influenced by intensive agricultural and industrial activities. Additionally, spatial relationship analysis, facilitated by Geographic Information System (GIS) technology, is employed to gain insights into complex hydrogeological processes. The multi-parameter strategy implemented results in water quality maps that highlight various ions, revealing spatial disparities and assigning quality priority classes from ‘Good’ to ‘Poor’ across the groundwater. The research, conducted in the semi-arid Tebessa-Morsott Plain, encompasses field and laboratory investigations to delineate hydrochemical traits, including alkalinity, salinity, and heightened ion concentrations. The results of the study contribute to scientific understanding by uncovering interrelationships and spatial intricacies, offering valuable insights for water resource governance. The effectiveness of the methodology, incorporating WQI and GIS, is demonstrated in the comprehensive evaluation of groundwater quality. Ultimately, this research provides a foundation for informed decision-making and sustainable management of groundwater resources in semi-arid regions.
Keywords:
Freshwater Demands, Water Quality Index WQI, Aquifer, Hydrogeological Processes, Chemical Parameters.