In this study, thermal and mechanical behaviours of composite building materials obtained from different kinds of natural stone wastes were investigated. First of all, XRD, chemical and grain size distribution analyses were carried out to identify the natural stone wastes to be used. 60% granite (magmatic), 35% recrystallized limestone (metamorphic) and 5% pure aluminium oxide (Al2O3) materials were used in the prepared mixture. The prepared mixture was shaped in a steel mould 75x20x50 mm in size by adding 7% shaping water and fired at 1140 ° C, 1150 ° C and 1160 ° C. Following that XRD analyses, colour determination, water absorption coefficient, bending strength, Young’s Modulus, bulk density, apparent density and open porosity tests were performed on the samples. According to the XRD analyses results gehlenite, anorthite and wollastonite phases were detected. In accordance with the results of other experiments and analysis, it was found that bending strength, Young’s Modulus and mass density values have increased, but on the other hand water absorption coefficient, apparent density and open porosity values had decreased after the firing process.
Gökhan DEMİRELA, Mustafa Haydar TERZİ, Ahmet Fatih OSKAY
Indexed In · Volume 178 / December 2025
Pegmatites and alkali feldspar granites as sources of industrial K-feldspar: A study from Borucu, Aksaray, Central Türkiye
Authors:
Gökhan DEMİRELA, Mustafa Haydar TERZİ, Ahmet Fatih OSKAY
ABSTRACT
The Borucu (Aksaray) region, within the Central Anatolian Crystalline Complex, comprises a variety of rocks, including granite, alkali feldspar granite (AFG), pegmatite, and aplite dikes. The granite and AFG host some veins or lenses of pegmatites, with lengths reaching approximately 70 m in the N10-25W direction. The AFG and pegmatitic rocks are characterized by variable mineral assemblages, including K-feldspar (orthoclase), quartz, plagioclase, and to a lesser extent, biotite, garnet, and opaque minerals. Inner zones feature the mega-grained pegmatite, whereas outer zones consist of the coarse-grained K-feldspar and quartz pegmatite. In this study, integrated surface and vertical (trenching and drilling) exploration, mineralogy-petrography, geochemical, and magnetic separation analyses were employed to assess the industrial raw material potential of the AFG and pegmatites. The total alkali (Na2O+K2O) contents reach 15.56-16.82% for the mega-grained pegmatite, 8.07-9.76% in the coarse-grained pegmatite, and 9.20-9.66% in the AFG. However, the Fe2O3 contents (0.30-1.15%) constrain their industrial raw material quality. Magnetic separation improved the AFG material to second-quality ceramic industry standards. Despite Fe2O3 limitations, Borucu’s pegmatites and AFG represent usable industrial raw material resources.
Keywords:
Alkali Feldspar Granite, Pegmatite, K-Feldspar, Magnetic Separation.
Mineralogy · Volume 177 / August 2025 · Pages: 11-22
Ebru SEZEN, Zehra S. KARAKAŞ
Indexed In · Volume 177 / August 2025
Newly identified uranyl vanadate mineral formation in the Thrace Basin, NW Türkiye: Insights into identification and origin of carnotite and tyuyamunite minerals
Authors:
Ebru SEZEN, Zehra S. KARAKAŞ
ABSTRACT
The Thrace Basin is located in the northwest of Türkiye, bounded by the Rhodope Zones to the west, the Strandja (Istranca, Strandzha) Massif to the North, and the İstanbul Zone to the east. The Stranja Massif’s basement is composed of the Tekedere Group, which includes Paleozoic gneisses and schists, as well as the Şeytandere Metagranite, consisting of altered and unaltered metagranites. Unaltered metagranites are characterized by large feldspar crystals and are typically white and pink in color, while altered metagranites are typically yellow color. The subject of this study Şeytandere metagranites which the uraninite mineral, for the first time, was identified in unaltered metagranite samples, while carnotite and tyuyamunite minerals were identified in altered meta-granite samples. The morphologies and elemental compositions of these minerals were identified by Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS). The SEM-EDS analyses revealed that the major elements of carnotite [K2(UO2)2(V2O8)(H2O)3] and tyuyamunite [Ca(UO2)2(V2O8)(H2O)8] are of K, U and V and Ca, U and V, respectively. In the investigated samples carnotite has a plate-like morphology, whereas tyuyamunite shows a fibrous appearence. This investigation shows that carnotite and tyuyamunite are epigenetically formed from uranyl vanadate minerals in the Şeytandere metagranite. These minerals indicate uranium leaching from granitic materials and re-deposition as fine specks in open pores by circulating meteoric water. The leached uranyl ions, combined with vanadate ions, form carnotite and tyuyamunite under weathering conditions.
Investigation of the change in the characteristic properties of epoxy and silane coated natural stone surfaces
Authors:
Zehra Ebru SAYIN, Hakan ÇİFTÇİ, Mustafa GÜRSOY
ABSTRACT
Travertine is a natural stone with macro and micropores; these pores are connected by capillary means. Their visual appearance and porous structure add a different style and diversify their usage areas. However, the large pore structure of travertine brings some limitations in determining the usage areas. In the study, protective solutions called silane and epoxy, which provide protection against water, were used to prevent and/or minimize decomposition in areas of use, depending on the porosity of the travertine, and their effects on travertine were compared. Treatment of both chemicals separately on the travertine surface was carried out by spraying, applying with a brush, and dipping into chemicals. With the findings obtained from the physical examinations after curing, the work continued using the applying and dipping method. The dipping method was evaluated with the chemical’s 10, 20, and 40-minutes waiting times. The study found that the best application condition was chemical immersion for 10 minutes. However, in SO2 wear experiments, it was understood that surfaces treated with epoxy were more durable due to the high viscosity of the chemical. As a result, it has been determined that silane application provides more effective surface protection results than epoxy.
İrfan TEMİZEL, Emel ABDİOĞLU YAZAR, Mehmet ARSLAN, Abdullah KAYGUSUZ, Zafer ASLAN
Indexed In · Volume 157 / 2018
Mineral chemistry, whole-rock geochemistry and petrology of Eocene I-type shoshonitic plutons in the Gölköy area (Ordu, NE Turkey)
Authors:
İrfan TEMİZEL, Emel ABDİOĞLU YAZAR, Mehmet ARSLAN, Abdullah KAYGUSUZ, Zafer ASLAN
ABSTRACT
The Eocene intermediate to felsic plutons are widespread in varying sizes and compositions throughout the Eastern Pontides Orogenic Belt in NE Turkey. Of these, two monzonitic bodies (namely the Eriko Tepe and Göl Tepe Plutons) in the Gölköy (Ordu) area, extend nearly in the orientation of NW-SE and E-W and were emplaced into the Upper Cretaceous and/or Eocene volcanic and sedimentary rocks. Petrographically, the studied monzonitic plutons are compositionally fine to medium grained monzonite, monzodiorite and subordinate quartz-monzonite. They consist of plagioclase (An35-67), K-feldspar (Or61-96), quartz, clinopyroxene (Wo28-49En35-51Fs10-25), biotite (Mg#: 0.53-0.73) ± hornblende (Mg#: 0.65-0.82), Fe-Ti oxide with monzonitic, poikilitic, perthitic, rare antirapakivi and graphic textures. Mineral thermobarometer estimations imply that the plutons were crystallized in P-T conditions of mid to shallow crustal levels. Petrochemically, these monzonitic plutons show post-collisional, I-type, metaluminous (A/CNK=0.76-0.93) and shoshonitic features. The whole-rock major oxide and trace element variations suggest that fractionational crystallization played a significant role in the evolution of these monzonitic plutons. The primitive mantle-normalized trace element patterns of the studied plutons are similar to each other with enrichment in large ion lithophile elements, Th, Ce and negative Nb and Ti anomalies. Moreover, the chondrite-normalized rare earth element plots of the plutons show moderately enriched concave-shaped patterns (LaN/LuN=9.3-12.6) with negative Eu anomalies (EuN/Eu*=0.69-0.84), all of which imply plagioclase and clinopyroxene ± hornblende fractionations during their evolution. The geochemical data suggest that the monzonitic plutons have evolved from parental magmas derived from the melts of enriched lithospheric mantle in a post-collisional setting.
DOI: 10.19111/bulletinofmre.371623
Keywords:
Mineral chemistry, Thermobarometer, Geochemistry, I-type, Monzonite, Eocene, Gölköy, Turkey
Ghassem AZİZZADEH, Mostafa RAGHİMİ, Seyed Jamal SHEİKHZAKARİAEE, Aziz RAHİMİ CHAKDEL
Indexed In · Volume 157 / 2018
Geochemical characteristics of Gabbroic rocks in Zyarat in North East of Iran
Authors:
Ghassem AZİZZADEH, Mostafa RAGHİMİ, Seyed Jamal SHEİKHZAKARİAEE, Aziz RAHİMİ CHAKDEL
ABSTRACT
The mafic rocks outcrops exposed in the South of Gorgan, northeastern of Iran. These gabbroic rocks are intruded into the Middle–Upper Paleozoic sedimentary rocks and Gorgan schist units representing a part of the north Gondwana province. Petrography studies of these rocks show medium to coarse grained sizes and the texture varies from ophitic to intergranular under polarized microscope. The mineralogical composition of mafic dykes is dominated by large crystals of clinopyroxene + orthopyroxene + plagioclase and hornblende. These rocks can be classified as gabbroic rock. Geochemical studies show that these rocks have low to medium K2O contents. The trace element data shows low La/Nb ratios and LREE enrichment (La/Yb 10–21.4). The high LREE/HREE ratios and low Y content corresponding high Ti/Y ratios of the gabbros suggest that they could be derived from melt fractions of a garnet stable source. Considering that the REE plot and tectonic diagrams of the region's gabbro are similar to that of OIB (Ocean island basalt), the former's origin is the same as that of OIB magmas.
DOI: 10.19111/bulletinofmre.413716
Optimization of some parameters on desulfurization process of Muğla Yatağan Bağyaka lignite by ultrasonic waves
Authors:
İlkay ÜNAL SANSAR
ABSTRACT
In this study, the desulfurization process developed using ultrasonic waves for Muğla Yatağan Bağyaka lignite had the optimum conditions for parameters affecting the ash and sulfur removal potentials determined with the Surface Response Method and a model created. The process parameters to obtain optimum desulfurization and ash removal were chosen as the ultrasonic treatment time, solid content, concentration of chemical reactive (H2O2) and reactive volume, and the optimum values were determined. Using this data with the aid of the Design Export 7.0 program, the regression model was found as a second degree polynomial equation. The coefficients of determination (R2) for desulfurization and ash removal regressions were 0.96 and 0.97, respectively, in the determined model. The model prediction values and experimental results for desulfurization and ash removal in the investigated parameter intervals were compared and the fit was identified. In the experimental removal of sulfur types with optimum desulfurization it was found that pyritic 17.02%, sulfate 16.67% and organic 9.52%
DOI: 10.19111/bulletinofmre.417405