Paleocene-Eocene aged sediments from the east of Tuz Gölü Basin (Central Türkiye) provide significant data for foraminifera contents and their paleoenvironmental clues. They are important in revealing the stratigraphy of the region and the Paleocene-Eocene geological history of Türkiye. The sediments, composed mainly of carbonates, are known as Karapınaryaylası Formation. In this formation, benthic foraminifera representing SBZ2 to SBZ12 biozones corresponding to the Selandian-Late Cuisian time interval were identified in ten measured stratigraphical sections. The zonal interval from the E7 Zone (late Ypresian) to the E10 Zone (Lutetian) is characterized by the marker species of planktonic foraminifera defined in the clayey limestones from the uppermost part. The studied formation is divided into four main facies and eleven sub-microfacies types. The clayey limestone levels of the Karapınaryaylası Formation, which generally starts with a transgressive sequence, contain abundant planktonic foraminifers, while the lithologies of grainstone, packstone and wackestone are rich in benthic foraminifers. Benthic foraminifer assemblages indicate different paleoenvironments from lagoon to back-bank, bank and fore-bank. The obtained foraminiferal data show the Selandian-Lutetian age range and various paleoenvironments from the lagoon to the open sea.
The Paleocene-Eocene succession at Djebel Onk, northeastern Algeria, remains poorly understood, despite its significance for reconstructing paleoenvironments during a critical period of global change. Unlike the well-studied equivalent series in the Metlaoui-Gafsa Basin, the Algerian counterpart lacks a robust stratigraphic and paleoenvironmental framework. This study addresses this gap by applying detailed sedimentological and petrographic analyses, integrated with sequence stratigraphic principles based on the model of Vail. Five erosional surfaces delineate five truncated depositional sequences, each containing only a transgressive and highstand systems tract, indicating repeated interruptions in sedimentation. Eight lithofacies were identified, reflecting deposition along a carbonate ramp system that ranges from outer ramp to restricted lagoonal and tidal flat settings. These facies transitions reveal shifts between transgressive and regressive phases, including a notable phosphatic-rich interval and an upper evaporitic horizon. The uppermost sequence is interpreted as an inner ramp deposit from the terminal Ypresian to early Lutetian. Stratigraphic correlation with distal, pelagic facies supports this age assignment. The integration of facies architecture with the influence of eustatic and tectonic controls allowed identification of two second-order tectonoeustatic cycles. This refined framework enhances regional correlation of Paleocene-Eocene deposits in North Africa and underscores the complex stratigraphic evolution of the Kef Essnoun section.
Keywords:
Paleocene-Eocene, Sequence Stratigraphy, Carbonate Ramp, Facies Analysis, Djebel Onk
Rare earth elements · Volume 178 / December 2025 · Pages: 130-148
Berna YAVUZ PEHLIVANLI, Menevşe ALTAN
Indexed In · Volume 178 / December 2025
Rare Earth Element Potentials of Red-Colored Eocene Kazmaca and Late Eocene–Early Miocene İncik and Bayındır Formations (Kırıkkale, Türkiye)
Authors:
Berna YAVUZ PEHLIVANLI, Menevşe ALTAN
ABSTRACT
Thered-colored sedimentary rocks of the Kazmaca, İncik, and Bayındır formations, particularly the red mudstones, exhibit noteworthy enrichment in Rare Earth Elements (REEs) and uranium. These finegrained units were deposited in low-energy lacustrine to shallow-marine environments, where redoxsensitive geochemical processes played a central role in elemental mobilization and accumulation. Mineralogical and geochemical analyses, including XRD, XRF, and ICP-MS, identified the uraniumbearing mineral Fourmarierite, confirming the presence of uranium mineralization. This finding is supported by elevated Cu/Al ratios, increased Fe concentrations, and trace-element distributions indicative of a redox-controlled diagenetic environment. The high Fe concentrations and Cu/Al ratiosact as geochemical proxies for REE-hosting phases. The depositional setting, characterized by low dissolved oxygen levels, likely reflects a warm and humid paleoclimate that enhanced chemical weathering and facilitated the mobilization and subsequent precipitation of uranium and REEs. Notably, dark-colored mudstone interbeds within the sandstone sequences exhibit localized uranium accumulation, which may represent precursor zones for secondary REE mineralization. These findings underscore the importance of redox conditions and climatic factors in controlling REE and uranium enrichment in red bed sequences. The presence of Fourmarierite, in conjunction with distinctive geochemical signatures, suggests a significant potential for REE exploration in these formations.
Keywords:
Rare Earth Elements (REEs), Fourmarierite, Red Sedimentary Rocks, Kazmaca Formation, İncik Formation, Bayındır Formation.
The genesis of Mordenite occurrences: Diagenetic and hydrothermal alteration processes of Paleocene volcanics in Ilıca (Yıldızeli), Türkiye
Authors:
Hülya ATEŞ
ABSTRACT
Different geological processes such as weathering, diagenesis in hydrological systems, hydrothermal processes and contact metamorphism have been proposed to explain the genetic relationships of mordenite occurrences. The mineralogical and genetic analyses in this study are essential for identifying alteration minerals and assessing reaction processes. The Yıldızeli region, located south of the İzmir-Ankara-Erzincan suture zone and northeast of the Kırşehir block, is significant for its mineral deposits. This area consists of Paleocene-Miocene volcano-sedimentary units. Analyse results of selected zone mordenite samples from the Paleocene volcanic units that host mordenite mineralization are linked to low-grade metamorphism, particularly associated with zeolite facies (150-300 °C, 1-3 kbar and pH 4-7), following tectonically controlled hydrothermal alteration. The zeolitization process involves interacting fluids crucial for mobilizing alkali elements, with compositional variations in mordenite indicating a continuous evolution toward equilibrium conditions under decreasing temperatures. The progression from mordenite to smectite, along with associated kaolinite occurrences, can be attributed to the hydrothermal circulation of alkaline waters and sodium extraction from underlying evaporites.
Vitrinite reflectances and mineralogy of coal clasts in the Late Carboniferous sequences in the two-deep research wells from the Kozlu coalfield (Zonguldak Basin, NW Türkiye)
Authors:
Ali İhsan KARAYİĞİT, Rıza Görkem OSKAY
ABSTRACT
Fifty-four coal clast samples in the siliciclastic rocks (e.g., sandstone and conglomerate) were collected from cores of two-deep research wells (K20H and K20K) drilled at the Kozlu coalfield in Zonguldak Basin, and for the first time, they were evaluated using mineralogy by XRD and SEMEDX and random vitrinite reflectance (%Rr) measurements in order to find out their origin and timing. Petrographic observations on polish surfaces show that the coal clasts are either entirely xylitic/vitrinitic particles or coals including a broader range of macerals. The detected minerals in the samples are mostly derived from the parental coal seams and, to a lesser extent, precipitated from penetrated pore-water in the cleats/fractures of clasts. The %Rr values of coal clasts in Carboniferous sediments are generally relatively higher than those measured in the coal seams due to weak oxidation during transportation. Furthermore, similar mineralogical and maceral compositions between coal clasts and coal seams imply that these clasts were mainly eroded during the peatification and/or early coalification of parental seams and display similar coalification patterns. The close %Rr value of a coal clast sample in the Early Aptian Zonguldak Formation and Carboniferous coal seams could suggest that this coal clast sample is presumably derived from the coal seams eroded during Early Aptian.
Keywords:
Zonguldak Basin, Late Carboniferous, Coal Petrography, Coal Clast, Erosion of Coal Seams.
Kamil KAYABALI, Turgay BEYAZ, İlknur KARAASLAN ÖZDEMİR, Deniz YILMAZ
Indexed In · Volume 173 / April 2024
A simple and practical tool for indirect determination of the unconfined compressive strength of most common construction materials
Authors:
Kamil KAYABALI, Turgay BEYAZ, İlknur KARAASLAN ÖZDEMİR, Deniz YILMAZ
ABSTRACT
Determination of the unconfined compressive strength (UCS) of construction materials in the laboratory is tedious and time-consuming. There have been many attempts to indirectly predict UCS using simpler tools and techniques. One of them is the nail gun. The scope of this investigation is to design a nailer which can be applied all construction materials whose UCS range from 1-100 MPa. In the research, rocks, bricks, and concretes prepared in different cement/sand ratios with different strength ranges were used as materials. The unconfined compressive strength of the materials used in the experiments was first determined by conventional compression tests. The nail penetration depths were determined by conducting experiments on the same materials using a nailer with two different energy levels. An empirical relationship was developed by using nail penetration depths, driving energies, and nail diameters as the independent variables and the UCS determined by the conventional method as the dependent variable. According to the empirical relationship determined by multiple regression analysis, the UCS of building materials can be estimated with significance level of 99% by the nail penetration method. The research also revealed that the UCS of rocks might have a coefficient of variation as high as 30%.
Keywords:
Compressive strength, building materials, nail gun, driving energy.
Şükrü Onur KARACA, Gültekin ERTEN, Semih ERGİNTAV, Shuhab D. KHAN
Indexed In · Volume 173 / April 2024
Anthropogenic problems threatening major cities: Largest surface deformations observed in Hatay, Türkiye based on SBAS-InSAR
Authors:
Şükrü Onur KARACA, Gültekin ERTEN, Semih ERGİNTAV, Shuhab D. KHAN
ABSTRACT
The surface deformation caused by tectonic activities and anthropogenic factors poses a great threat to cities worldwide. The investigation and monitoring of these deformations are crucial in order to create risk analysis for the future. The problem in this case is to investigate the surface deformations and their negative effects caused by groundwater use and to identify possible landslide areas. In this study, the surface deformations in Hatay province were analyzed using SBAS-InSAR. The results from these analyses were evaluated by field observations. Sentinel-1 descending (183 datasets) and ascending (147 datasets) track geometries were selected to determine the surface deformation and its temporal evolution. Both east-west and vertical surface deformations were calculated, and the surface deformation profiles, surface 3D models and time series were created. These time series were associated with monthly precipitation data. The deformation area was interpreted with regard to available well-log data and geological setting of the study area. As a result of the study, a surface deformation resembling a bowl like structure was observed in the industrial zone located in the city center of Hatay-Güzelburç. The deformation rates are approximately 22.3 cm/year in the form of subsidence, 3.6 cm/year in the form of eastern movement and 10.1 cm/year in the form of western movement. The deformation of this bowllike structure decelerated in the winter and accelerated in the summer due to excessive water use. The average monthly precipitation dataset supports these results. The stratigraphic data from water wells and the presence of limestone outside the eastern boundary of the deformation area show a thick clay layer in the eastern block of the bowl-shaped deformation structure. The difference between these two units, which causes a sharp anomaly at the eastern border of the deformation area, is interpreted as a probable normal fault. The second study area where surface deformations are observed is the landslide zone. The deformation was found to be 7.5 cm/year in a westward direction and 1.5 cm/year as subsidence.