Volume 174 · August 2024 · 9 ARTICLES
All Articles In This Issue
01
Indexed In · Volume 174 / August 2024
Determination of Atterberg Limits using the vane shear test method
Authors: ABSTRACTAtterberg limits are important index parameters used to classify soils for various engineering applications. Engineering properties of soils are predicted through simple correlations with index properties and thereby the engineering behavior of soils are qualitatively assessed. There are two popular methods of determining liquid limit, and plastic limit is commonly determined adopting rolling thread methods. To avoid operator related variations in determining plastic limit by conventional method, some researchers have explored using cone method as an alternative. However, there is no consensus about the depth of penetration to reckon the end of plastic state. Though various other test methods have been developed to determine plastic limit (like roll plate device), cone penetration with its limitation of determining plastic limit, is the only method to determine both liquid and plastic limit of soils. Since laboratory vane shear test is a simple and reliable method of determining undrained strength of fine-grained soils, the authors have explored to determine both liquid and plastic limits through correlations developed between undrained strength and water content over a range of consistencies between liquid and plastic states. This would eliminate determining liquid and plastic limit separately without sacrificing the reliability of results.
Keywords:
02
Indexed In · Volume 174 / August 2024
Determination of the relationship between tectonic and karstification using morphometric indices in Bozburun Peninsula, Marmaris, Türkiye
Authors: ABSTRACTBozburun Peninsula (Marmaris) attracts attention due to its various karst shapes on limestones of different ages. It is also located in an important region in terms of tectonic activity. In this study, the distribution of karst shapes determined by satellite images, topographic maps and field studies was examined. In this context, the elevation ranges (m), base and hillslope angles (%), depth (m) and pitting rates (RP), elongation ratio (RE) and directions (EA α) of the relevant shapes were determined. Then, the relationship between the faults and the quantitative results obtained was interpreted. Remote Sensing (RS), Geographic Information System (GIS) technologies, calculations and field observations used in the study; it enabled us to reveal that there is a close relationship between karstic formations such as polje, uvala and doline and geological structures such as faults, diaclasis, folds and Nappe windows. Available data also show that geological structures have a positive effect on karstification in the study area.
Keywords:
03
Indexed In · Volume 174 / August 2024
Porphyry and epithermal Au-Cu systems of the Southern Caucasus and Northern Iran
Authors: ABSTRACTThis article presents tangible geological evidence for the coexistence of porphyry copper and epithermal gold systems within single polygenic deposits and provides a paleothermophysical model for their origins. A brief metallogenic analysis of the Southern Caucasus and Northern Iran has shown that such deposits are confined to long-living calc-alkaline island arcs and were formed during their orogenesis. Examples of complex Sonajil (Iran), Gharta, and Merisi (Georgia) deposits are considered. The investigation has shown that for combined porphyry and epithermal ore formation, some preconditions are suggested to exist: (i) a source of anomalous energy that exceeds the thermodynamics of the enclosing environment; (ii) the existence of a temperature gradient that determines conventional flows of fluids composed of endogenous and meteoric constituents (proven by rhythmical zoning of ore lodes); (iii) the stability of such conditions for a period of sulfide ore formation. However, such a process of sulfide ore formation cannot explain the formation of high sulfidation gold deposits. The precipitation of native gold requires phreatic collapse in the ore conduit channel, already after the formation of hydrothermally altered rocks, and this event results in the creation of either hydrothermal breccias often with jigsaw-fit texture or brecciated vuggy silica where host rocks and hydrothermally altered rocks are cemented by a gold-bearing quartz matrix.
Keywords:
04
Indexed In · Volume 174 / August 2024
Edge enhancement of potential field data using the enhanced gradient (EG) filter
Authors: ABSTRACTPotential field data play a critical role in interpreting various geologic structural features through edge detection filters that aid in mapping subsurface structural features. For this purpose, various filters have been introduced in recent years to determine lateral boundaries. However, each of these filters has its limitations and advantages. This study presents a new edge enhancement filter named Enhanced Gradient (EG) based on the Richards function and applies it to potential field data for structural mapping. The EG is tested on two dimensional (2D) and three dimensional (3D) synthetic magnetic models with sources buried at different depths and variable properties. The results from the EG filter provide more accurate and higher resolution horizontal boundaries and can avoid creating the false edges in the output results. In addition, the proposed filter was examined using aeromagnetic data from the Indiana region in the USA. The primary and secondary faults and geological formations are recognizable in the EG image. The results of the EG map will allow us to improve the qualitative interpretation of potential field anomalies in studying the structural and tectonic geology of the Indiana region in the USA.
Keywords:
05
Indexed In · Volume 174 / August 2024
Structural relationship between subsurface oil fields in the North Dezful Embayment: Qaleh Nar, Lower and Upper Balarud Anticlines (Central Zagros, Iran)
Authors: ABSTRACTHow subsurface anticlines (oil fields) link structurally with faults is of great relevance in the exploration and development of oil fields. In this context, we investigate the geometric relation between lower Balarud (LBR), upper Balarud (UBR) and Qaleh Nar (QN) subsurface anticlines that are the main oil fields in the Northern Dezful Embayment, central Zagros. The Asmari (As) and the Bangestan (Bng) reservoirs are studied geophysically using seismic profiles, well data and underground contour maps (UGC). Interpretation of 3500 m deep seismic profiles indicates the geometry of the studied subsurface anticlines differs vertically and horizontally to a significant proportion. The interpreted structures much resemble As and Bng horizons in each anticline. The UBR got overturned on the LBR due to thrusting possibly in the Late Miocene. The LBR, like a rabbit-ear structure, is situated at the northern edge of the QN. The lower and upper Chenareh and LBR and UBR resemble structurally and are separated mutually by a steep (strike-slip) fault. The fault separates the LBR and UBR from the QN. Interaction of different factors change in overburden pressure, rate of deformation and uplift in the different parts of the subsurface anticlines moved and accumulated Gachsaran Formation towards both limbs of the anticlines.
Keywords:
06
Indexed In · Volume 174 / August 2024
Investigation of the change in the characteristic properties of epoxy and silane coated natural stone surfaces
Authors: ABSTRACTTravertine is a natural stone with macro and micropores; these pores are connected by capillary means. Their visual appearance and porous structure add a different style and diversify their usage areas. However, the large pore structure of travertine brings some limitations in determining the usage areas. In the study, protective solutions called silane and epoxy, which provide protection against water, were used to prevent and/or minimize decomposition in areas of use, depending on the porosity of the travertine, and their effects on travertine were compared. Treatment of both chemicals separately on the travertine surface was carried out by spraying, applying with a brush, and dipping into chemicals. With the findings obtained from the physical examinations after curing, the work continued using the applying and dipping method. The dipping method was evaluated with the chemical’s 10, 20, and 40-minutes waiting times. The study found that the best application condition was chemical immersion for 10 minutes. However, in SO2 wear experiments, it was understood that surfaces treated with epoxy were more durable due to the high viscosity of the chemical. As a result, it has been determined that silane application provides more effective surface protection results than epoxy.
Keywords:
07
Indexed In · Volume 174 / August 2024
Archaeoseismology: Earthquake traces studies in ancient settlements; a chronological evaluation from the World focusing on Türkiye
Authors: ABSTRACTArchaeoseismology is a field of science that investigates the remains of ancient human structures of destructive earthquakes that occurred in their ancient history and in this respect makes inferences on the possible effects of earthquakes whose origins will be may occurred in the future. Although many authors wrote the effects of ancient earthquakes in various periods, the first modern archaeoseismology studies in the world gain momentum starting from the end of the 19th century at the same time with Türkiye. In this understanding, the geography of Anatolia (Asia Minor), which has hosted a wide variety of cultural layers since its Mesolithic end, is an open-air research laboratory for modern archaeoseismological studies. This study is a reference work that summarizes the historical past of the discipline of archaeoseismology chronologically in the perspective of studies on Earth and Anatolia, presents suggestions about the future of archaeoseismology and is a literature summary for the new generation of archaeoseismologists.
Keywords:
08
Indexed In · Volume 174 / August 2024
Assessing groundwater quality in semi-arid conditions: a geographic information systems-integrated approach using water quality index
Authors: ABSTRACTMeeting freshwater demands in water-scarce regions is imperative, given challenges like hydric stress, urbanization, aridity, and population growth. This study focuses on the Tebessa aquifer system, a critical water source facing escalating demands. A primary objective is to identify actionable management strategies to improve groundwater quality dynamics in semi-arid regions. The methodology involves a comprehensive assessment of groundwater health using the Water Quality Index (WQI) approach. This method integrates diverse parameters influenced by intensive agricultural and industrial activities. Additionally, spatial relationship analysis, facilitated by Geographic Information System (GIS) technology, is employed to gain insights into complex hydrogeological processes. The multi-parameter strategy implemented results in water quality maps that highlight various ions, revealing spatial disparities and assigning quality priority classes from ‘Good’ to ‘Poor’ across the groundwater. The research, conducted in the semi-arid Tebessa-Morsott Plain, encompasses field and laboratory investigations to delineate hydrochemical traits, including alkalinity, salinity, and heightened ion concentrations. The results of the study contribute to scientific understanding by uncovering interrelationships and spatial intricacies, offering valuable insights for water resource governance. The effectiveness of the methodology, incorporating WQI and GIS, is demonstrated in the comprehensive evaluation of groundwater quality. Ultimately, this research provides a foundation for informed decision-making and sustainable management of groundwater resources in semi-arid regions.
Keywords:
09
Indexed In · Volume 174 / August 2024
Economic heavy minerals in the stream sediments of wadi Shaàb, southern coast of the Red Sea, Egypt; characterization and upgrading for investigation of their potential recovery
Authors: ABSTRACTThe southern coast of the Red Sea is one of the most promising areas for the occurrence of economic minerals. Therefore, studying the characterization and evaluation of these minerals in the Wadi Shaàb Quaternary sediments and investigating their ability to concentrate and physically separate using economical and ecofriendly techniques is the main goal of this work. The results showed that the representative sample contains an average of 0.06% ilmenite, 0.08% zircon, 0.07% rutile, 0.07% leucoxene, 0.008% cassiterite, 0.004% xenotime, 0.0004% monazite, 0.022% almandine garnet, and 0.46% magnetite. The recovery of economic heavy minerals was applied using a combination of wet-gravity technique via shaking table and magnetic separation using high intensity magnetic separator. The results demonstrated the success of gravity separation in raising the grade from 7.63% to 45.03% in a yield of 13.74% out of the original sample, and also valuable metallurgical recoveries that higher than 89% for tabling multi-stages (rougher and scavenging) was obtained. Concentrated mineral fractions of magnetite, ilmenite, almandine, heavy silicates, and the nonmagnetic fraction bearing zircon and rutile were obtained using a high intensity magnetic separator at different ampere range.
Keywords:
No articles match your search.