Diyadin Geothermal Field, Thermogene Fissure-ridge Travertine, Active Volcano, Active Strike-slip Tectonic Regime.
Abstract:
Diyadin is situated 71 km ESE of Ağrı nearby the Turkish-Iranian State border in the east Anatolian tectonic block. It is only one of several type localities of promising geothermal fields in eastern Anatolia. The neotectonic regime and related fault zones in the Eastern Anatolia are dominated by a strike-slip tectonic regime governed by a stress field state, in which the greatest principal compressive stress (σ1) is operating in NNW direction (N22°W) while the least principal stress axis (σ3) or extension direction is N68°E. This stress field state was proved once more by the tensor solution of the 12 June 2022 Akçift (Muradiye-Van) earthquake of Mw = 5.1. The strike-slip neotectonic regime started at the time of latest Pliocene-early Quaternary and then triggered the first occurrence of the fissure eruption along the NNW trending Kaletepe open fracture. This event was followed by the development of both the two-peaked Tendürek strato-shild volcano and the Diyadin geothermal field (DGF). The most common manifestations of the DGF are the active tectonic regime and related faults, active volcanoes, fumeroles, numerous hot water springs to artesian wells, widespread ironrich alteration zones, actively growing fissure-ridge travertines and the probable presence of the shallow-seated and unroofed hypabyssal felsic to intermediate intrusions of Quaternary age.
Comparative analysis of water and carbon dioxide injection for the thermohydraulics of an EGS project in Dikili Geothermal Field, Türkiye
Authors:
Ali Cemal BENİM, Aydın ÇİÇEK
ABSTRACT
A comparative numerical analysis of the thermohydraulics of an enhanced geothermal system (EGS) project in Türkiye in Dikili area is presented. The fractured granodiorite is modelled as porous media, utilizing the numerically suggested data of other authors for the corresponding hydraulic characteristics. As the heat transmission fluid, two different mediums are alternatively considered. These are the more classical medium, water and the supercritical carbon dioxide (sCO2). Transient calculations are performed for a time period of twenty years, comparing the temporally developing results obtained for water and sCO2 with each other. Based on modeling parameters and assumptions, higher production temperatures are observed with sCO2, in comparison to water, implying an advantage for sCO2 usage as a working fluid in EGS. This is accompanied by the further advantage of a lower pressure drop for sCO2. On the other hand, the temperature advantage is relativized by the lower specific heat capacity of sCO2 causing a decrease in the production thermal power. In general, the present results are found to be encouraging for a further and more detailed analysis of the employment of sCO2 as working fluid in EGS.
Geothermal gradient variation in the Büyük Menderes Graben: implications for geothermal potential of the graben, Western Anatolia, Türkiye
Authors:
Adrian WIGGINS,, İbrahim ÇEMEN
ABSTRACT
The Büyük Menderes Graben (BMG) is an E-W oriented active extensional geothermal basin within the Menderes Massif, a metamorphic core complex, in Western Anatolia, Türkiye. 1500 (megawattsenergy) MWe of installed geothermal capacity for power production exist as of December 2019 in Western Anatolia, mostly generated in the BMG. While the BMG is a vastly producing geothermal resource, it is predicted that it has higher production potential. However, other studies do not include field scale 3D geologic models or geothermal gradient maps. This study aims to first quantitatively test the geothermal gradients in the Aydın-İncirliova-Osmanbükü Geothermal Field (IGF), then map the information. This study also aims to compare the IGF with a neighboring geothermal field. To complete this study, information from stratigraphic columns, bottom hole temperatures, and continuous temperature logs from 13 geothermal wells is utilized with Leapfrog Geothermal to create 3D models of the geology and subsurface temperature distribution. Then, isothermal contour maps of the field are created. The geologic modeling suggests that synextensional deposition has occurred within the graben. The temperature modeling suggests both that thermal breakthrough may have occurred in the field, and that the IGF has a higher geothermal gradient than the nearbyGermencik Geothermal Field.
Keywords:
Extensional Terrane, Tectonics, 3D Model, Temperature Gradient Map, Leapfrog.
Tuğba ISIK, Alper BABA, Dornadula CHANDRASEKHARAM, Mustafa Muammer DEMİR
Indexed In · Volume 171 / August 2023
A brief overview on geothermal scaling
Authors:
Tuğba ISIK, Alper BABA, Dornadula CHANDRASEKHARAM, Mustafa Muammer DEMİR
ABSTRACT
Hot spring waters are rich in terms of minerals. Since there are dramatic changes in thermodynamic parameters in geothermal power plants, such as a decrease in temperature and pressure, severe precipitation occurs throughout the system components in an uncontrolled manner. There are three main chemistries in deposits: carbonates (mainly calcium carbonates), silicates (metal silicates), and sulphides (antimony sulphide-stibnite). Energy harvesting is remarkably reduced out of the insulating nature of the deposit. Various actions need to be taken to mitigate this undesirable issue of scaling in geothermal systems. Geothermal systems are in fact quite complex, and the composition of brine and, accordingly, the chemistry of the deposit are not identical. Therefore, each system should be studied individually, and a tailor-made remedy should be developed. In this overview, the types of deposits in terms of chemistry and the actions (pH modification or antiscalant dosing) that
should be taken to reduce scaling are mentioned, and potential chemistries of antiscalants are given.