BULLETIN OF THE MINERAL RESEARCH AND EXPLORATION (MTA Dergisi)
AUTHOR PROFILE
Articles by Hakan ÇIFTÇI
2 PUBLICATIONS
01
Volume 174 / 2024 · Pages: 85-98
Zehra Ebru SAYIN, Hakan ÇİFTÇİ, Mustafa GÜRSOY
Indexed In · Volume 174 / 2024
Investigation of the change in the characteristic properties of epoxy and silane coated natural stone surfaces
Authors:
Zehra Ebru SAYIN, Hakan ÇİFTÇİ, Mustafa GÜRSOY
ABSTRACT
Travertine is a natural stone with macro and micropores; these pores are connected by capillary means. Their visual appearance and porous structure add a different style and diversify their usage areas. However, the large pore structure of travertine brings some limitations in determining the usage areas. In the study, protective solutions called silane and epoxy, which provide protection against water, were used to prevent and/or minimize decomposition in areas of use, depending on the porosity of the travertine, and their effects on travertine were compared. Treatment of both chemicals separately on the travertine surface was carried out by spraying, applying with a brush, and dipping into chemicals. With the findings obtained from the physical examinations after curing, the work continued using the applying and dipping method. The dipping method was evaluated with the chemical’s 10, 20, and 40-minutes waiting times. The study found that the best application condition was chemical immersion for 10 minutes. However, in SO2 wear experiments, it was understood that surfaces treated with epoxy were more durable due to the high viscosity of the chemical. As a result, it has been determined that silane application provides more effective surface protection results than epoxy.
In this study, leaching experiments were performed for extraction of magnesium from a chromite beneficiation plant tailing predominantly containing lizardite. The X-ray fluorescence (XRF) and X-ray diffraction (XRD) analyzes showed that the tailing sample contains 39.3wt.% MgO and consist of predominantly lizardite mineral. Hydrochloric acid (HCl) and sulphuric acid (H₂SO₄) were used as acids separately in leaching experiments. Acid concentration, leaching temperature, leaching time, and solid ratio were investigated as leaching parameters and optimized. Maximum magnesium extraction yield was determined to be nearly 98% for both acids under optimum leaching parameters which leaching temperature was 85°C, solid ratio was 20wt.%, leaching time was 120 minutes, and acid concentrations were 6 M for HCl and 4 M for H₂SO₄. In addition, it was determined that the leaching residue as a solid state was mainly composed of amorphous silicate according to the XRD analysis. Dissolution rate data were explained using Jander equation. Mg dissolution process found to be diffusion controlled.
https://doi.org/10.19111/bulletinofmre.827630