Tectonic forces formed in the continental crust, cause permanent changes in stress, compression and deformation. The amplitudes of earthquake waves vary with the stress/strain distribution in the crust. In this study, the change of stress / strain and regional absorption coefficient, which is effective in tectonic forces caused by elastic deformation energy accumulating in the brittle crust over time, was investigated. The study area is the middle part of the North Anatolian Fault Zone and the area formed by Ezinepazarı fault zone and Merzifon fault zone. In this area, Coulomb stress analysis was carried out by using the focal mechanism solution values of the earthquake that occurred in Yoldere-Erbaa, Tokat on October 9, 2015 (ML=5.1). In order to examine the deformation caused by this earthquake in and around the study area, Global Navigation Satellite System (GNSS) data were evaluated and the velocities of these stations were calculated using GNSS data of these stations for the years 2013-2014-2015-2016. Also, regional absorption coefficients were determined by using earthquake data. As a result, Coulomb stress analysis results, velocity values distribution obtained from GNSS data and absorption findings obtained from seismological study were evaluated together.
Denis TEŽAK, Nikola KRANJČIĆ, Bojan ĐURIN, Mihaela JURAS
Indexed In · Volume 163 / 2020
Integration of the GNSS method and borehole camera to model the resulting spherical cavity generated by the main charge blast in clay
Authors:
Denis TEŽAK, Nikola KRANJČIĆ, Bojan ĐURIN, Mihaela JURAS
ABSTRACT
A depth camera was used to record the spherical cavity which occurred during blasting in clay soil. For this purpose, the integration of the Global Navigation Satellite System (GNSS) method was applied in addition to the depth camera and the laser, to determine the resulting spherical cavity. The expanded spherical cavity, formed after the blasting of the explosive charge in the bottom of the borehole, was measured by a depth camera-laser system. The GNSS measurement method was instrumental for obtaining the coordinates of the borehole. The Multichannel Analysis of Surface Waves (MASW) measurement method was also used during the study. Shear wave velocities (VS) were calculated using MASW method to evaluate the dynamic properties of the clay soil along the in-situ profiles. The results obtained in this way, showed that there was an increase in the stiffness of the surrounding clay soil after blasting. The main objective of the study was to determine the resulting shapes and volume of the occurred cavities. For a more detailed graphical interpretation, an application was developed, which calculates the coordinates, shape and volumes of the formed spherical cavity.
https://doi.org/10.19111/bulletinofmre.726391
Güzin Gülsev UYAR AKSOY, Cemalettin Okay AKSOY, Hasan Eray YAMAN
Indexed In · Volume 169 / 2022
Estimation of blast vibrations by numerical modelling and signal analysis
Authors:
Güzin Gülsev UYAR AKSOY, Cemalettin Okay AKSOY, Hasan Eray YAMAN
ABSTRACT
Seismic waves carry all the geological and geotechnical characteristics of the units they pass along the route they travel on. Therefore, seismic waves can be called the signature of the route it passes through. If the blasting point is considered as source, blast-induced seismic waves measured at a certain distance from the source can be revealed and this form can be integrated into the dynamic numerical model, the effects that will occur at any point of the model can be predicted. In this study, seismic waves induced from single-hole blast and a group blast consisting of holes with the same characteristics as a pilot blast hole were obtained using particle velocity data obtained from seismographs at certain distances and integrated into the numerical model. The data processing technique used is to estimate the theoretical group blasting data from the pilot data according to the linear superposition principle and compare with the real group blasting data to determine the nonlinear behavior effect on the blast source from the difference. When the results were examined, it was observed that the numerical model results and field measurements coincided. The results of this study will make a significant contribution to the science of rock engineering.
https://doi.org/10.19111/bulletinofmre.1066943
Uludağ extensional metamorphic core complex: preliminary field observations
Authors:
Gürol SEYİTOĞLU, Korhan ESAT
ABSTRACT
In the northern margin of Uludağ Massif in northwest Anatolia, the Bursa Detachment having topto- the north, northeast normal sense of shear separates the lower plate high-grade metamorphic rocks of Series-A (Uludağ Group) from the upper plate low-grade metamorphic rocks of Series-B (Karakaya Complex). The deeper section of Uludağ Massif is represented by the Oligocene metagranites at the southern parts of the massif that is exposed due to the youngest high-angle Soğukpınar normal fault. The massif is a typical extensional metamorphic core complex similar to the counterparts in the west and northwest Anatolia such as the Menderes, Kazdağ, and Çataldağ core complexes due to close timing of exhumation and a similar sense of shearing.
https://doi.org/10.19111/bulletinofmre.1029034
Keywords:
Uludağ Core Complex, North Anatolian Fault, Eskişehir Fault, Southern Marmara.
Cihan YALÇIN, Nurullah HANİLÇİ, Mustafa KUMRAL, Mustafa KAYA
Indexed In · Volume 169 / 2022
Formation and tectonic evolution of structural slices in eastern Kargı Massif (Çorum, Türkiye)
Authors:
Cihan YALÇIN, Nurullah HANİLÇİ, Mustafa KUMRAL, Mustafa KAYA
ABSTRACT
The closure of Tethys Ocean has led to shaping the Central Pontides together with different types of rocks. In the east of Kargı (Gökçedoğan), which is located in the Central Pontides, allochthonous rocks of Late Palaeozoic-Early Cenozoic age and autochthonous units exist together, and allochthonous rocks present various tectono-stratigraphical sequences. Distinctive tectonic slices developed in the area as a consequence of the thrusting of the Permian carbonates from the north towards the south over the Middle Jurassic accretionary Complex (Kunduz Metamorphites) that form the basement of the area, and also because of the thrusting of the units of the Kirazbaşı Complex (ophiolitic melange) and Mesozoic carbonate rocks over this basement from the south towards the north because of the closure of Tethys Ocean. This paper presents whole-rock geochemical data, which suggest that the metabasites and the ophiolitic basalts are tholeiitic. The Jurassic metabasites from the Kunduz Unit and basalts from ophiolitic melange are characterized by the mid-ocean ridge basalt (MORB) and within plate tholeiites. This paper highlights the occurrence of the tectonic slices in the area is closely related to the tectonic evolution of the Tethys Ocean.
https://doi.org/10.19111/bulletinofmre.1067604
Keywords:
Central Pontides, Tectonic Slice, Accretionary Complex, Geodynamic, Kargı, Çorum.