Archaeometallurgy, Thailand, Bronze Age, Anatolia, New Paradigm.
Abstract:
This article reviews the Ban Chiang, Northeast Thailand, Volumes 2A, 2B, and 2C edited by Joyce C. White and Elizabeth G. Hamilton with the aim of bringing a new perspective to the understanding of archaeometallurgy in Anatolia. Regardless of specific subject focus such as geology, geomorphology,
archaeology, or anthropology, any scholar interested in the field of archaeometallurgy will find a comparanda of their research in the Thai archaeology monograph volumes. White and Hamilton suggest a new paradigm favoring diversity and an anthropological technology-driven model for
archaeometallurgical research, which I believe presents an excellent case to change and revise the presumptions of scholars studying metals’ role in ancient Anatolia.
https://doi.org/10.19111/bulletinofmre.990063
Latest Pliocene-Quaternary uplift of the central Tauride and Evolutionary history of the Kızıllar Canyon, southern central Anatolia-Türkiye
Authors:
Ali KOÇYİĞİT, Uğur DOĞAN
ABSTRACT
The study area is located near the apex of the north-facing and V-shaped Konya-Niğde Graben. Its south-southeast margin is defined and controlled by the NE-trending Karaman-Niğde Fault Zone. It also forms the geographic boundary between the central Tauride in the south and central Anatolia in the north. This study aimed to determine the Latest Pliocene-Quaternary uplift rate of the central Tauride and the evolutionary history of the Kızıllar Canyon located on the uplifting southern footwall block of the Karaman Niğde Fault Zone. Both the geological and geomorphological field data, which were obtained within the framework of this study, revealed the following: (1) the Kızıllar River drainage system developed as a result of several capture events; (2) Lithological and hydrological characteristics of the valley reveal the reason for the lack of gradation in the river’s longitudinal profile; (3) the Kızıllar Canyon reflects the incision process of the Kızıllar River; (4) the Kızıllar River cut vertically into its bed up to 230 m, which corresponds to the minimum Latest Pliocene- Quaternary uplift rate of the central Tauride (~0.06 mm/yr); and (5) the Kızıllar Canyon developed as a natural response of the river to the uplift of the Konya-Niğde Fault Zone footwall block.
Keywords:
Kızıllar Canyon, Central Taurides, Central Anatolia, Fault, Uplift Rate
The Dodurga Fault is an active right-lateral strike-slip fault, approximately 63 km long, striking NW-SE in northwestern Anatolia. Based on 1:25,000-scale active fault mapping, the fault is subdivided into two principal geometric segments. Segment 1 is approximately 16 km long and extends from Sulhiye in the west to Erikli in the east, whereas Segment 2 is 47 km long and is characterized by a right-stepping geometry and a 10°-15° southeastern deflection. Geological and geomorphological observations, together with kinematic analyses, indicate that the fault is dominantly right-lateral strike-slip in character. Stream channels offset by up to several kilometers along the fault trace support its long-term activity, and fault-plane kinematic indicators independently confirm dextral motion. Paleostress analyses of the kinematic data indicate that the recent deformation phase along the Dodurga Fault is governed by approximately N-S contraction and E-W extension. Empirical scaling relationships suggest that Segment 1 and Segment 2 are capable of generating earthquakes of Mw 6.47 and Mw 6.97, respectively. If both segmentsrupture together, the Dodurga Fault could potentially generate an earthquake of Mw 7.16.
Evaluation of the tectonic activity of faults with mineral alterations: a case of the East Anatolian Fault-Palu segment, Türkiye
Authors:
Firdevs GÜZEL, Gülcan SARP
ABSTRACT
Palu segment is a part of the East Anatolian Fault Zone (EAFZ), the most important active leftlateral strike-slip fault system in Turkey, and there are different mineral alterations in this zone. The study tested the spatial relationship between tectonic activity and mineral alterations with the Getis-Ord Gi* statistic in and around the Palu segment. Mineral alterations at the pixel level were determined from ASTER images by Ratio, Relative Band Depth (RBD), Mineral Indices, CROSTA, Constrained Energy Minimization (CEM), Mixed Tuned Matched Filter (MTMF) methods. According to the results, the spatial distribution of alteration minerals extending parallel to tectonically active fault lines and/or partially bounded by faults in the area. RBD, Mineral Indices, CROSTA, CEM, and MTMF image processing algorithms applied in the study gave consistent results in the spatial determination and mapping of mineral alterations in the study area. At 99% and 95% confidence intervals, statistically significant cold spot clusters indicate the proximity of alterations to faults concentrated around fault lines. This degree of clustering of mineral alterations indicates regions with high alteration rates close to fault lines and areas with tectonic activity along fault lines.
Keywords:
Active Tectonics, Alteration Minerals, Getis-Ord Gi* Statistic, ASTER.
Ramazan SARI, Şahset KÜÇÜKEFE, Gülcan BOZKAYA, Ömer BOZKAYA, Fatih BADEMLER, Zehra DEVECİ ARAL, Elif Dilek BAYRAKÇIOĞLU, Cahit DÖNMEZ, Serkan ÖZKÜMÜŞ
Indexed In · Volume 167 / 2022
Geological, mineralogical-petrographical and fluid inclusion characteristics of the Çatalçam (Soma-Manisa) Au-Pb-Zn-Cu mineralization
Authors:
Ramazan SARI, Şahset KÜÇÜKEFE, Gülcan BOZKAYA, Ömer BOZKAYA, Fatih BADEMLER, Zehra DEVECİ ARAL, Elif Dilek BAYRAKÇIOĞLU, Cahit DÖNMEZ, Serkan ÖZKÜMÜŞ
ABSTRACT
The study area is located in the southeastern Biga Peninsula. As result of field, drilling and laboratory studies, diorite porphyry intruded to Lower Miocene and older units and contained Au, Pb, Zn and Cu anomalies, has been determined. Intersected potassic, propylitic, phyllic and argillic alteration zones were developed in the pluton and host rock. Veins-veinlets developed in the pluton and host rock, contain native gold, silver, pyrite, chalcopyrite, sphalerite and galena. They are composed of undulated quartz in the deeper levels, and massive quartz, calcite/dolomite and barite in the middle and upper levels. According to the fluid inclusion data from sphalerite, quartz and barite,temperature of ore-bearing fluids are in three groups (argillic:150-220°C, phyllic:250-350°C, potassic:>400°C). Fluid inclusions, including solid phases such as hematite, chalcopyrite and salt as well as liquid and gas phases, indicate that Çatalçam Au-Cu mineralization is intrusion-related system. Fluid inclusion data display temperature and salinity of the ore-bearing fluids in the early stage (porphyry) are high, whereas relatively lower in the late stage (epithermal). In conclusion, Çatalçam mineralization was developed in two different phases as porphyry Au-Cu and epithermal Zn-Pb-Cu-Au, which is the first porphyry gold deposit related to Miocene magmatic-hydrothermalsystem in the Biga porphyry belt. https://doi.org/10.19111/bulletinofmre.930094
Investigation of dissolution behavior of scandium and lithium from red mud
Authors:
Hüseyin BAŞTÜRKCÜ
ABSTRACT
In this study, scandium and lithium extractions were investigated using the atmospheric pressure agitation leaching method at acidic medium. The leaching tests were carried out at two stages. To remove the ionic impurities such as Na and Al first stage leaching was performed at relatively higher pH. Following solid-liquid separation of leach cake of the first stage leaching, it was subjected to the second stage leaching. The second stage leaching resulted in 95.1% Sc and 94.7% Li extractions. The overall Sc and Li recoveries were determined as 82.4% and 86.5%, respectively. Regarding the kinetic studies, it was understood that scandium and lithium leaching processes were controlled by a combination of chemical reaction and ash diffusion models. In this case, the activation energies were determined as 29.52 and 30.22 kJmol-1, respectively for scandium and lithium. As a result, while direct H2SO4 leaching of red mud is a challenge due to physical and chemical problems, an alternative solution was suggested using H2SO4 even at high solids ratios. https://doi.org/10.19111/bulletinofmre.941073
Keywords:
Red Mud, Scandium, Lithium, Two-Stage Leaching, Kinetics.
Relationship of ore properties and alteration of the Büyük Kuluncak (Malatya) Nb - U - NTE - Zr - Li deposit
Authors:
Okan PULAT, Mustafa KARAKAŞ, Mehmet Ali YASTI
ABSTRACT
Rare Earth Elements (REE) + Niobium (Nb) + Uranium (U) + Zircon (Zr) + Lithium (Li) formations are investigated which are related with alkaline Upper Cretaceous - Lower Paleocene Kuluncak Syenitoid that settled by cutting the Kuluncak ophiolite in the north of Kuluncak (Malatya) town. The alkaline magma-related Büyük Kuluncak REE - Nb - U deposit, which is enriched with regard to rare metals (Nb, Zr, and Rb), is the first economic deposit of our country. The deposit formed related to alkaline characterized foid syenite, sodalite syenite, syenite, alkaline feldspar syenite rocks which intruded into Triassic - Lower Cretaceous limestones of the Domuzdağı Nappe. The REE and fluorites with related elements formed in magmatic rocks, the contact zone of these rocks with limestones, in pegmatitic intrusions and in fluorites formed with the effect of the contact metasomatism. The purpose of this study is to interpret ore properties and the alteration grade of the rocks which formed the deposit. The REE are enriched in argillized and highly argillized samples.However, the REE composition of fresh samples are relatively low. Therefore, the REE are enriched twice or three times due to the effects of alteration and argillization of the hydrothermal fluids in the parent rock and contact metasomatism and alterations that occur both syn- and post-emplacement of syenite. https://doi.org/10.19111/bulletinofmre.973626