It is aimed in this study to measure the undercutting rate of weak geological units under field conditions and to determine the relationship between this parameter and other indexes and physical properties of related rocks. Thus, 11 different locations in which weak materials were found and undercutting problems were observed in the road slopes were selected. In these road cuts, the undercutting depths in many locations were obtained by measurements taken at different dates from the pins installed in the fresh surface of weak units. In addition, undercutting depth was directly taken by using the amount of erosion between durable and weak rock units in the road slopes with a known date of the excavation. Samples having suitable amounts and sizes were collected at the measured locations to be used in physical and durability tests. In the analyses, the applicability of the results of slake index and durability tests, as well as the disintegration ratio in the determination of the disintegration behavior of these geological units, was investigated, and statistically significant empirical equations were obtained. Considering the results obtained from different weak geological units, it was determined that the depth of undercutting values change approximately between 10.1 and 45.8 mm. https://doi.org/10.19111/bulletinofmre.898013
The genesis of Mordenite occurrences: Diagenetic and hydrothermal alteration processes of Paleocene volcanics in Ilıca (Yıldızeli), Türkiye
Authors:
Hülya ATEŞ
ABSTRACT
Different geological processes such as weathering, diagenesis in hydrological systems, hydrothermal processes and contact metamorphism have been proposed to explain the genetic relationships of mordenite occurrences. The mineralogical and genetic analyses in this study are essential for identifying alteration minerals and assessing reaction processes. The Yıldızeli region, located south of the İzmir-Ankara-Erzincan suture zone and northeast of the Kırşehir block, is significant for its mineral deposits. This area consists of Paleocene-Miocene volcano-sedimentary units. Analyse results of selected zone mordenite samples from the Paleocene volcanic units that host mordenite mineralization are linked to low-grade metamorphism, particularly associated with zeolite facies (150-300 °C, 1-3 kbar and pH 4-7), following tectonically controlled hydrothermal alteration. The zeolitization process involves interacting fluids crucial for mobilizing alkali elements, with compositional variations in mordenite indicating a continuous evolution toward equilibrium conditions under decreasing temperatures. The progression from mordenite to smectite, along with associated kaolinite occurrences, can be attributed to the hydrothermal circulation of alkaline waters and sodium extraction from underlying evaporites.
Petrography and geochemical decomposition parameters of crystalline rocks; Demirköy intrusive body (DIB), NW Turkey
Authors:
Ezgi ULUSOY, Yusuf Kağan KADIOĞLU
ABSTRACT
The crystalline rocks represent the most weathering rock groups due to their textural and mineralogical decomposition. This study, focused on the petrographic properties and geochemical variation of the altered rocks from Demirköy Intrusive Body (DIB) located at NW Turkey were examined based on the location of structural and morphological properties. DIB consists ofintrusive rocks in the composition of ranging from granite to gabbro. The sampling made from the dominant rock units composing of granodiorite and quartz diorite, within the DIB a cross weathering section divided into three levels as regolit, saprolite and saprock. For each level of all the section Ruxton ratio (Ro), chemical alteration index (CIA), chemical weathering index (CIW), plagioclase alteration index (PIA) were determined. The results show a linear decrease from the surface to the core of the host rock. The chlorite-carbonate-pyrite index (CCPI) versus Ishikawa alteration index (AI) variation diagram shows that decomposition in profiles occurred in diagenetic alteration and where the hydrothermal alteration effect is not observed. On the other hand, Mg, Fe, Ti, Ca decreased remarkably while the ratio of the elements such as Si, Na, K, Al increased. The increasing and decreasing of geochemical elements are related to their physical strength and chemical behavior. Chemical variation diagrams of all the levels revealed that the regolites exhibit chemical compounds from hydrothermal fluids in the immediate vicinity of the source rocks.
https://doi.org/10.19111/bulletinofmre.793795
Comparison of the results of the suppression of surface related multiple reflections by predictive deconvolution in pre- and post-stack in 2D marine seismic reflection data: a case study from the Sea of Marmara
Authors:
Mehmet Ali ÜGE, Ali İsmet KANLI
ABSTRACT
This study aims to suppress the multiple reflections from the multi-channel seismic reflection data, which collected on the profile M97-29 at the Sea of Marmara with the MTA Sismik-1 Vessel in 1997 by the General Directorate of Mineral Research and Exploration (MTA), both at the pre- and post-stack stages separately, by using predictive deconvolution and to compare both results. The stack section obtained by applying predictive deconvolution to the pre-stack shot gathers, is compared with the stack section obtained by applying predictive deconvolution to the post-stack section, which has no predictive deconvolution application before stack. The multiple reflections are mostly suppressed in both sections, but the amplitudes of the primary reflections are much more noticeable and have much higher amplitudes on the stack section obtained by applying predictive deconvolution to the pre-stack shot gathers. Considering the data used in this study, which obtainedfrom a shallow seabed section of the Sea of Marmara including slopped structures, it has beenobserved that the result obtained by applying the predictive deconvolution process to the pre-stack shot gathers are more successful than the other. https://doi.org/10.19111/bulletinofmre.909820
Keywords:
Predictive Deconvolution, Seismic Reflection, Data Processing, Suppression of the Multiple Reflections, Marmara Sea.
The water sources in parts of the River Mamu sub-Basin, southeastern Nigeria were evaluated for domestic and agricultural purposes using hydrogeology and water quality. Thirty water samples from both surface water and groundwater were analysed for hydrochemical and biological parameters. The average depth to aquifers and their thicknesses are 109.9m and 11.8m respectively. The concentration of the major ions, TDS and EC are within the DSÖ permissible guidelines for drinking water. Heavy metals concentration ranges in mg/L for Cd2+ (0 - 0.06), Cr3+ (0 - 0.19), Hg2+(0 -1.0), As3+ (0 - 0.14) and total Fe (0 - 2.4) which in some of the samples exceed the permissible guideline values. The fecal coliform range in 100ml/L of samples (0 - 36) exceeds the guideline values in some of the samples. The water is Ca-Mg-Cl-SO4 type with the dominant ions as Ca2+ and SO4 2- for both groundwater and surface water. The dominant geochemical processes are rock-water interaction in the groundwater, which is a major contributor of dissolved ions and precipitation in the surface water. The WQI (17.84 - 301.99) connotes some samples as very poor quality for domestic purposes. Irrigation indices depict most of the water as good to excellent for agriculture. https://doi.org/10.19111/bulletinofmre.941090
Keywords:
Water Sources, Water Quality, Pollution, Trace Element, Fecal Coliform and Ebenebe Sandstone.
A new paradigm for the future of archaeometallurgy in Anatolia: review of Thai archaeology monograph series (TAM)
Authors:
Gonca DARDENİZ
ABSTRACT
This article reviews the Ban Chiang, Northeast Thailand, Volumes 2A, 2B, and 2C edited by Joyce C. White and Elizabeth G. Hamilton with the aim of bringing a new perspective to the understanding of archaeometallurgy in Anatolia. Regardless of specific subject focus such as geology, geomorphology,
archaeology, or anthropology, any scholar interested in the field of archaeometallurgy will find a comparanda of their research in the Thai archaeology monograph volumes. White and Hamilton suggest a new paradigm favoring diversity and an anthropological technology-driven model for
archaeometallurgical research, which I believe presents an excellent case to change and revise the presumptions of scholars studying metals’ role in ancient Anatolia.
https://doi.org/10.19111/bulletinofmre.990063
Keywords:
Archaeometallurgy, Thailand, Bronze Age, Anatolia, New Paradigm.