Kırşehir Masifi, Çiçekdağı napı, Orta Anadolu plütonik kayaları, stratigrafi
Abstract:
The metamorphics belonging to the Kırşehir Massif, which form the pre-Paleogene basement units in Central Anatolia around Kırşehir, are formed from bottom to top by conformable and transitional Late Devonian Kalkanlıdağ, Carboniferous-Early Permian Kervansaray and Late Permian Bozçaldağ formations and by the unconformably overlying Triassic Demirtepe and Jurassic- Cretaceous Saytepe formations. The sedimentation age of 237 Ma were obtained from the clastic zircons in the quartzites of the Demirtepe formation by the U/Pb method, and the metamorphism age ranges from 94.5 Ma and 83.7±3.3 Ma from the metabasites from the Whole Rock by the 40Ar/39Ar method. The Kasımağa and Sırataşlar formations within the Çiçekdağı Nappe belonging to the northern branch of Neotethys, which were tectonically emplaced over these units and the Turonian- Santonian Kargınkızıközü formation, which were the product of ensimatic island arc magmatism, were distinguished. The metamorphics and the Central Anatolian plutonic rocks, which cut the overlying ophiolitic rocks, were differentiated according to their composition, origin and age, and ranges from 71.9±1.7 Ma from the Baranadağ pluton; ranges from 84.0±1.9 Ma and 71.9±7.2 Ma from the Çayağzı pluton; ranges from 69.1±1.2 Ma by the40Ar/39Ar method, and 65.3±1.1 Ma were obtained from the Buzlukdağı pluton by the U/Pb method. The age ranges from 79.1±1.2-68.2±1.2 Ma and 74.5 Ma were obtained from the whole rock by 40Ar/39Ar method from trachyandesites belonging to the Kötüdağ volcanics, which are surface-semi-depth rocks of granite, monzonite and syenite composition plutonic rocks. The cover units overlie all these units with an angular unconformity. https://doi.org/10.19111/bulletinofmre.930051
Comparison of the results of the suppression of surface related multiple reflections by predictive deconvolution in pre- and post-stack in 2D marine seismic reflection data: a case study from the Sea of Marmara
Authors:
Mehmet Ali ÜGE, Ali İsmet KANLI
ABSTRACT
This study aims to suppress the multiple reflections from the multi-channel seismic reflection data, which collected on the profile M97-29 at the Sea of Marmara with the MTA Sismik-1 Vessel in 1997 by the General Directorate of Mineral Research and Exploration (MTA), both at the pre- and post-stack stages separately, by using predictive deconvolution and to compare both results. The stack section obtained by applying predictive deconvolution to the pre-stack shot gathers, is compared with the stack section obtained by applying predictive deconvolution to the post-stack section, which has no predictive deconvolution application before stack. The multiple reflections are mostly suppressed in both sections, but the amplitudes of the primary reflections are much more noticeable and have much higher amplitudes on the stack section obtained by applying predictive deconvolution to the pre-stack shot gathers. Considering the data used in this study, which obtainedfrom a shallow seabed section of the Sea of Marmara including slopped structures, it has beenobserved that the result obtained by applying the predictive deconvolution process to the pre-stack shot gathers are more successful than the other. https://doi.org/10.19111/bulletinofmre.909820
Keywords:
Predictive Deconvolution, Seismic Reflection, Data Processing, Suppression of the Multiple Reflections, Marmara Sea.
Investigation of dissolution behavior of scandium and lithium from red mud
Authors:
Hüseyin BAŞTÜRKCÜ
ABSTRACT
In this study, scandium and lithium extractions were investigated using the atmospheric pressure agitation leaching method at acidic medium. The leaching tests were carried out at two stages. To remove the ionic impurities such as Na and Al first stage leaching was performed at relatively higher pH. Following solid-liquid separation of leach cake of the first stage leaching, it was subjected to the second stage leaching. The second stage leaching resulted in 95.1% Sc and 94.7% Li extractions. The overall Sc and Li recoveries were determined as 82.4% and 86.5%, respectively. Regarding the kinetic studies, it was understood that scandium and lithium leaching processes were controlled by a combination of chemical reaction and ash diffusion models. In this case, the activation energies were determined as 29.52 and 30.22 kJmol-1, respectively for scandium and lithium. As a result, while direct H2SO4 leaching of red mud is a challenge due to physical and chemical problems, an alternative solution was suggested using H2SO4 even at high solids ratios. https://doi.org/10.19111/bulletinofmre.941073
Keywords:
Red Mud, Scandium, Lithium, Two-Stage Leaching, Kinetics.
Investigation of the slaking behavior of weak geological units in terms of undercutting rate
Authors:
Semiha ÖZDEMİR, Zeynal Abiddin ERGÜLER
ABSTRACT
It is aimed in this study to measure the undercutting rate of weak geological units under field conditions and to determine the relationship between this parameter and other indexes and physical properties of related rocks. Thus, 11 different locations in which weak materials were found and undercutting problems were observed in the road slopes were selected. In these road cuts, the undercutting depths in many locations were obtained by measurements taken at different dates from the pins installed in the fresh surface of weak units. In addition, undercutting depth was directly taken by using the amount of erosion between durable and weak rock units in the road slopes with a known date of the excavation. Samples having suitable amounts and sizes were collected at the measured locations to be used in physical and durability tests. In the analyses, the applicability of the results of slake index and durability tests, as well as the disintegration ratio in the determination of the disintegration behavior of these geological units, was investigated, and statistically significant empirical equations were obtained. Considering the results obtained from different weak geological units, it was determined that the depth of undercutting values change approximately between 10.1 and 45.8 mm. https://doi.org/10.19111/bulletinofmre.898013