In our days, slags are considered secondary resources due to the metals they contain. Copper slags having economical operating grades in terms of Zn, Cu, Ce, Ni, Co, Mo, and V, have complex mineralogy due to their thermal processing based formations. Methods of recovery for copper and other precious metals from slags, have been studied, and for which, flotation plants in industrial scale are operated. In cases where physical or physico-chemical mineral processing methods are not sufficient, hydrometallurgical methods are applied. In this study, the flotation method was applied to a copper slag with 0.9% Cu grade. Copper recovery and the concentration grade were determined to be approximately 40 and 22.7% Cu, respectively. Metal extractions were examined through direct leaching tests. Using H2SO4 in the leaching, resulted in gel formation, leading to an investigation of the leach parameters using HCl. Cu and Ce extractions of around 70-80% were attained as a result of a test performed for 2 hours with the addition of 25 g/L H2O2 at a rate of 20-25% solids and 300 g/L HCl concentration. An examination of the metal relations, indicated that the dissolution behavior of Cu and Ce was quite similar to the Al dissolution (R2=0.9).
In this study, leaching experiments were performed for extraction of magnesium from a chromite beneficiation plant tailing predominantly containing lizardite. The X-ray fluorescence (XRF) and X-ray diffraction (XRD) analyzes showed that the tailing sample contains 39.3wt.% MgO and consist of predominantly lizardite mineral. Hydrochloric acid (HCl) and sulphuric acid (H₂SO₄) were used as acids separately in leaching experiments. Acid concentration, leaching temperature, leaching time, and solid ratio were investigated as leaching parameters and optimized. Maximum magnesium extraction yield was determined to be nearly 98% for both acids under optimum leaching parameters which leaching temperature was 85°C, solid ratio was 20wt.%, leaching time was 120 minutes, and acid concentrations were 6 M for HCl and 4 M for H₂SO₄. In addition, it was determined that the leaching residue as a solid state was mainly composed of amorphous silicate according to the XRD analysis. Dissolution rate data were explained using Jander equation. Mg dissolution process found to be diffusion controlled.
https://doi.org/10.19111/bulletinofmre.827630
Uludağ extensional metamorphic core complex: preliminary field observations
Authors:
Gürol SEYİTOĞLU, Korhan ESAT
ABSTRACT
In the northern margin of Uludağ Massif in northwest Anatolia, the Bursa Detachment having topto- the north, northeast normal sense of shear separates the lower plate high-grade metamorphic rocks of Series-A (Uludağ Group) from the upper plate low-grade metamorphic rocks of Series-B (Karakaya Complex). The deeper section of Uludağ Massif is represented by the Oligocene metagranites at the southern parts of the massif that is exposed due to the youngest high-angle Soğukpınar normal fault. The massif is a typical extensional metamorphic core complex similar to the counterparts in the west and northwest Anatolia such as the Menderes, Kazdağ, and Çataldağ core complexes due to close timing of exhumation and a similar sense of shearing.
https://doi.org/10.19111/bulletinofmre.1029034
Keywords:
Uludağ Core Complex, North Anatolian Fault, Eskişehir Fault, Southern Marmara.
Mustafa Kemal REVAN, Deniz GÖÇ, Mustafa ÖZKAN, Cüneyt ŞEN, Rasim Taylan KARA, Mustafa TOKOĞLU, Semi HAMZAÇEBİ, Rıfat Cihan SEVİM, Fatih SEZEN, Celaleddin BAYRAKTAR, Ömer AKGÜL
Indexed In · Volume 169 / 2022
Geology, fluid inclusion characteristics and mineral resource estimation of the Güzelyayla porphyry Cu-Mo mineralization (NE Türkiye)
Authors:
Mustafa Kemal REVAN, Deniz GÖÇ, Mustafa ÖZKAN, Cüneyt ŞEN, Rasim Taylan KARA, Mustafa TOKOĞLU, Semi HAMZAÇEBİ, Rıfat Cihan SEVİM, Fatih SEZEN, Celaleddin BAYRAKTAR, Ömer AKGÜL
ABSTRACT
Magmatic processes that emerged with the evolution of the Neotethys ocean and associated lithospheric plates caused the formation of significant mineralization in the Tethys belt. The Eastern Pontides, which are located in the northeast of Turkey and are a part of the Tethys metallogenic belt,
are particularly rich in porphyry-type mineralization and represent an important region for Cu-Mo exploration. A large number of Cu, Pb and Zn anomalies have been determined in a large region including the Güzelyayla Cu-Mo field by stream sediment sampling. The Güzelyayla occurrence
is Cu-Mo mineralization associated with andesitic/basaltic volcanic rocks and intrusive dacites crosscutting these rocks. The Güzelyayla Cu-Mo mineralization developed in the stockwork and fault-controlled silicified zones. Homogenization temperature values vary between 324 °C and 420 °C (average 374 °C). Salinity values range between 2.2 and 18.6% NaCl (average 9.1% NaCl). A concentric alteration zoning surrounding the potassic alteration indicates a gradual change in the physicochemical properties of the solutions forming the mineralization. The Güzelyayla mineralization was formed in the Eocene (50.7 ± 1.0 million years) period in the Upper Cretaceous volcanic rocks in relation to post-collisional processes in the magmatic arc environment. Contrary to previous studies, estimation zone models were created and an estimated 54.2 million tons of extracted/potential mineral resource with an average grade of 0.20% Cu and 0.014% Mo (0.26% Cu equivalent grade) was made in the Güzelyayla field.
https://doi.org/10.19111/bulletinofmre.1074485
Selçuk ALEMDAĞ, Rasim Taylan KARA, Hasan Tahsin BOSTANCI
Indexed In · Volume 169 / 2022
Evaluation of potential rock falls with three-dimensional analysis: Example of Oltanbey and Hasanbey districts (Gümüşhane city center)
Authors:
Selçuk ALEMDAĞ, Rasim Taylan KARA, Hasan Tahsin BOSTANCI
ABSTRACT
The central district campus of Gümüşhane, located on the Trabzon-Erzurum Highway, has a steep topography, and because of the effect of climatic and morphological structure, frequent rockfall events can cause loss of life and property from time to time. For these reasons, the slopes in some parts of the Oltanbey and Hasanbey districts of the central district of Gümüşhane, which pose a great threat in terms of rockfall potential, were chosen as the study area. In this study, three-dimensional rockfall analyzes were carried out using the RocPro3D program on the lines determined in the rockfall source zones with a high probability of rockfall. As a result of the analysis, it was determined that the rock blocks rolled from the O1, O2 and H1 source rock lines determined at the upper elevations of the study area threaten the settlements and road networks in Oltanbey and Hasanbey districts. With the 3D rockfall analysis, steel barrier was applied as a precautionary structure in the areas determined to be under the risk of rockfall, and the analyzes were carried out again considering the precautionary structures. By examining the results of the analyzes, the safest and most economical different barrier types have been proposed to eliminate the danger of rockfall.
https://doi.org/10.19111/bulletinofmre.977928
Keywords:
Steel Barrier, Rockfall Inventory Map, Rocpro3D, Three Dimensional Rockfall Analysis.