Home›The relation of seismic velocity and attenuation pattern in the East Anatolian fault zone with earthquake occurrence: Example of January 24, 2020 Sivrice earthquake
Article Details
The relation of seismic velocity and attenuation pattern in the East Anatolian fault zone with earthquake occurrence: Example of January 24, 2020 Sivrice earthquake
BULLETIN OF THE MINERAL RESEARCH AND EXPLORATION (MTA Dergisi)
Article Details
The relation of seismic velocity and attenuation pattern in the East Anatolian fault zone with earthquake occurrence: Example of January 24, 2020 Sivrice earthquake
The East Anatolian Fault Zone (EAFZ) is one the main tectonic elements of Turkey, which borders the Anatolian plate from the east. EAFZ, which is NE - SW direction, consists of many fault segments. In the historical and instrumental period, many damaging earthquakes occurred, the largest being 6.8 (Ms) as the 1971 Bingöl earthquake. The last magnitude 6.6 (Ml) (Mw=6.8) earthquake occurred on January 24, 2020 in Elazığ-Sivrice Hazar-Sincik segment of EAFZ. However, considering the historical and instrumental activity, it is seen that many fault segments are silent. In this study, the silent and active segments, and their seismic velocity (as % Vp and Vp) and attenuation pattern (as Q-1 p) are determined in order to determine the earthquake behavior of EAFZ in the near future. From the results obtained by using the data of the earthquakes that occurred from 2007 to the end of 2019, it was clearly determined that the velocity and attenuation increased on the Hazar-Sincik segment. It has been determined that Vp is 4.08-8.2 km/sec, Q-1 p is ± 0.005 and the frequency dependency varies between 0-1.08 along the zone. The variation of velocity and attenuation on the segments where the earthquake occurred and in the silent section were revealed.
Hamza BİRİNCİ, Kürşat ERGÜN, Aslı Zeynep YAVUZOĞLU, Korhan KÖSE, Güniz Büşra YALÇIN, Mustafa Berkay DOĞAN, Fatma Betül KARCI, Murat EVREN, Ayşe GÜNGÖR, Bahri Serkan AYDEMİR
Indexed In · Volume 172 / December 2023
Noise attenuation of a 3D marine seismic reflection dataset - a case study in the Southwest Black Sea region
Authors:
Hamza BİRİNCİ, Kürşat ERGÜN, Aslı Zeynep YAVUZOĞLU, Korhan KÖSE, Güniz Büşra YALÇIN, Mustafa Berkay DOĞAN, Fatma Betül KARCI, Murat EVREN, Ayşe GÜNGÖR, Bahri Serkan AYDEMİR
ABSTRACT
Noises in marine seismic data are one of the biggest obstacles in seismic imaging. The most significant step in seismic data processing is the removal of seismic noise, which can be classified as instrument and background noise. Noise attenuation usually results in improved seismic interpretation by increasing the signal-to-noise ratio. In this study, we will focus on attenuating these seismic noises with several data processing techniques. A number of denoising examples describing swell, strumming/tugging, and cavitation, which are background-type noises, and streamer-mounted device noise (Nautilus), which is an instrument-type noise, were illustrated by analysing a marine 3D seismic dataset recorded by Oruc Reis Research Vessel in Black Sea project of MTA (Mineral Research and Exploration). This study was achieved by implementing an f-x prediction filter (SPARC, DENOISE3D) and f-k filter (DWATT) in the t-x domain, and radon filter (RADATT) in Tau-P domain by the use of Geovation 2.0 software.
THE IMPORTANCE OF AMOUNT OF SETTLEMENT IN DETERMINING THE BEARING CAPACITY OF SOILS
Authors:
SELÇUK ALEMDAĞ, Aslıhan CİNOĞLU, Elif GACENER
ABSTRACT
In this study, it is aimed to determine safe bearing capacity of soils, which are out cropped around Tamzi and Akcakale villages located in Gumushane, providing allowable settlement conditions for an optimum foundation design. To define the geotechnical properties of soils, three trenches were dug and two seismic refraction with two Multichannel Spectral Analysis of Surface Waves (MASW) were carried out in each research area. Sieve analyses, shear box tests, triaxial compression tests were carried out on disturbed and undisturbed samples taken from the trenches. Seismic velocities of the soils are determined by seismic refraction and MASW methods. While determining the safe bearing capacity; the equations proposed by Terzaghi, Meyerhof, Kurtulus, Tezcan and Ozdemir, Turker, Keceli were used and the obtained safe bearing capacity values were compared to each other. After, the soils were modeled numerically by using finite elements method and safe bearing capacities providing allowable settlement conditions were determined. According to the results, safe bearing capacity values obtained from empirical equations are not satisfactory to have an optimum foundation design. For the optimum foundation design, safe bearing capacity should be accepted as 190 kN/m2 for clayey soil (CL) and 485 kN/m2 for the clayey sand (SC).
INVESTIGATION OF THE SEISMIC VELOCITY DISTRIBUTION AND CRUSTAL STRUCTURE OF TURKEY BY MEANS OF GRAVITY DATA
Authors:
Uğur AKIN
ABSTRACT
In this study, the apparent gravity density data was measured for Turkey using apparent density filter, and the seismic velocity distribution map was generated from this data cluster. By interpreting these two measured data clusters, three dimensional structure of the Conrad discontinuity was investigated. The apparent gravity filter is a kind of filter which is used in the apparent gravity measurements for different depth levels different than gravity data. In this study, considering previously measured distribution of the continental crustal thickness of the Anatolia, the density maps for different depth levels were formed and interpreted. The lowest and highest densities in different levels of Turkey are 2.23 gr/cm3 , and 3 gr/cm3 , respectively; and the mean density is 2.698 gr/cm3 . The lowest and highest seismic velocities for different thicknesses were measured as 3.20 km/sec and 6.83 km/sec, respectively. However; the mean seismic velocity of Turkey for depths increasing up to 10 km until MOHO discontinuity was estimated as 5.66 km/sec The density and seismic velocity in the first 20 km of the continental crust have reached its highest values as 2.74 gr/cm3 and 5.86 km/sec, respectively. This zone is also the Conrad discontinuity between the lower and upper crusts, and its average depth is 16 km in Turkey. The Conrad discontinuity boundary, which developed between SIAL-SIMA, not to be observed in the East Anatolian High Plateau made us consider that SIMA had disappeared as a result of the geological evolution, and the available crust could only be SIAL in origin.
Geological properties of Güney formation (Ereğli - Ulukışla Basin, Niğde)
Authors:
Ayfer ÖZDEMİR, Nurettin SONEL
ABSTRACT
The aim of this study to determine stratigraphic, sedimentological and petrographic characteristics of the Upper Paleocene - Lower Eocene Güney formation in the Ereğli - Ulukışla Basin based on the lithological and environmental interpretations related to petroleum source and reservoir rock properties of it. For this purpose, the geological characteristics of the Güney formation and its relations with other units were followed by field observations and the unit was investigated by making a stratigraphic cross section from bottom to top. In addition, during the field studies, four (4) scaled stratigraphic sections (OSK) were formed and fifty - two (52) sandstone samples were taken from these OSKs. The Güney formation starts with conglomerates at the basement and continues as sandstone - shale alternation. The fact that the sand size material is more than the clay size material, the sandstone layers are thick (at least 2 m) around the Kardeşgediği station, the presence of channel fillings, slump structures, and pebbles indicate that the sequence shows convergent turbidite character. However, in the vicinity of Ovacık - Güney village and Tatlıpınar ridges, shales having an average layer thickness of 30 cm (thick) and sandstones up to 3 - 5 cm (thin) and shales are denser than sandstones show the formation has divergent character. The Güney formation transitions laterally and vertically overlies the agglomerate unit of the Ulukışla formation and turbiditic sandstone - shale units of the Halkapınar formation. The Aktoprak formation passes laterally and vertically over the Formation. Petrographic studies show that the formation sandstones are lithic arenite and feldspathic arenite and are deposited in the fore - arc basin.
https://doi.org/10.19111/bulletinofmre.855696
Keywords:
Ereğli - Ulukışla Basin, Güney Formation, Sandstone, Sedimantology, Stratigraphy, Petrography
The effect of structural properties of Ankara clay on the electrokinetic properties
Authors:
Güzide KALYONCU ERGÜLER
ABSTRACT
The aim of this study is to investigate the effect of structural properties of soil known as Ankara clay, which contains different properties, on its electrokinetic behavior. For this purpose, the 8 disturbed samples from Ankara clay were collected from the different locations of Yüzüncüyıl and Karakusunlar areas, which were observed to contain no excess gravel and carbonate concretions. The electrokinetic behavior of these collected samples were evaluated by using the results of plastic limit, liquid limit, methylene blue, swelling, XRD, XRF, SEM, EDS and BET measurements and analyses as well as zeta potential tests. By these experimental studies, it has been determined that Ankara clay exhibits electrokinetic behavior in line with the whole rock composition since it contains different clay minerals. The monovalent and divalent electrolytes such as NaCl and CaCl2, respectively, increase the zeta potential of Ankara clay negatively. However, in the analyses, it was determined that FeCl3 trivalent electrolyte is the electrolytes determining the zeta potential, tend to convert zeta potential of clays from negative to positive depending on the concentration, and this could be the case with increased concentration.
https://doi.org/10.19111/bulletinofmre.770990
Keywords:
Ankara clay, Electrokinetic, SEM, EDS, Zeta potential
Mohamed Osman ELGIZOULI, Badr El Din KHALIL, Mohammed Y. ABEDELGALIL
Indexed In · Volume 165 / 2021
Metallogenic characteristics of some localities of gold mineralization along shear zones of Elgaab, Dum el Tor and Sodri - Um Bader, (Sudan)
Authors:
Mohamed Osman ELGIZOULI, Badr El Din KHALIL, Mohammed Y. ABEDELGALIL
ABSTRACT
Study area is located in the eastern sector of Saharan Meta - Craton that includes the western part of Bayuda Terrane and extend southwest to Sodri - Um Badir shear zones. The sector is dominated by metasediments, metavolcanic - sedimentary series represented by chlorite - schist, quartzite, calc - silicate, and marble. Low - grade metamorphic arc - related volcano - sedimentary sequence occurs as thin narrow bands and subjected to tectono - thermal events of Pan - African orogeny during the Late - Proterozoic era (900 - 550 Ma). All these rock sequences have been intruded by syn to Late Orogenic Granitoids and post - orogenic ring - shaped complex and felsic dykes. The intrusions are thought to be the source of hydrothermal fluids that caused the precipitation of gold. Similar characteristics of geological features and tectonic settings support the possibility of the extension of gold mineralization between shear zones. The comparison between the three gold mineralizations reveals variations in minerals assemblages, pathfinders and gold grade. The result of this study defines a new metallogenic province in the west of the River Nile, which occupies a very large area covered by Phanerozoic sediments. Numerous mineral deposits of economic potentiality have been targeted along the shear zones and related fractures and faults. Among those potential deposits, five of them have been chosen as targets for future gold exploration and evaluation.
https://doi.org/10.19111/bulletinofmre.695138
Keywords:
Shear, Related, Gold, Pan - African Orogeny, Metallogeny, Sudan