Home›Comparison of different approaches of computing the tilt angle of the total horizontal gradient and tilt angle of the analytic signal amplitude for detecting source edges
Article Details
Comparison of different approaches of computing the tilt angle of the total horizontal gradient and tilt angle of the analytic signal amplitude for detecting source edges
BULLETIN OF THE MINERAL RESEARCH AND EXPLORATION (MTA Dergisi)
Article Details
Comparison of different approaches of computing the tilt angle of the total horizontal gradient and tilt angle of the analytic signal amplitude for detecting source edges
Edge Detection, Horizontal Gradient, Analytic Signal, Tilt Angle, Direct Expression, Frequency Technique
Abstract:
This paper compares effectiveness of the different approaches of computing the tilt angle of the horizontal gradient amplitude and tilt angle of the analytic signal amplitude such as use of direct expression and frequency domain technique (also called k - function) in terms of their accuracy on the detection of the edges of magnetic and gravity sources. These approaches were performed on both synthetic magnetic and gravity data where the frequency domain technique shows improvements in delineation of the actual edges of the sources compared to the direct expression. Additionally, real magnetic data from Zhurihe (Northeast China), and real gravity data from Tuan Giao (Northwest Vietnam) was considered and the obtained results from applying the different approaches were compared with known geological structures. The results show that the boundaries detected from the use of the frequency domain technique are in accord with the known geological structures.
Hazel DENİZ TOKTAY, Korimilli N Durga PRASAD, Ahmad ALVANDI
Indexed In · Volume 174 / August 2024
Edge enhancement of potential field data using the enhanced gradient (EG) filter
Authors:
Hazel DENİZ TOKTAY, Korimilli N Durga PRASAD, Ahmad ALVANDI
ABSTRACT
Potential field data play a critical role in interpreting various geologic structural features through edge detection filters that aid in mapping subsurface structural features. For this purpose, various filters have been introduced in recent years to determine lateral boundaries. However, each of these filters has its limitations and advantages. This study presents a new edge enhancement filter named Enhanced Gradient (EG) based on the Richards function and applies it to potential field data for structural mapping. The EG is tested on two dimensional (2D) and three dimensional (3D) synthetic magnetic models with sources buried at different depths and variable properties. The results from the EG filter provide more accurate and higher resolution horizontal boundaries and can avoid creating the false edges in the output results. In addition, the proposed filter was examined using aeromagnetic data from the Indiana region in the USA. The primary and secondary faults and geological formations are recognizable in the EG image. The results of the EG map will allow us to improve the qualitative interpretation of potential field anomalies in studying the structural and tectonic geology of the Indiana region in the USA.
A brief note on the effects of floating standard deviation (non- derivative) and horizontal gradient (derivative) filters
Authors:
Ceyhan Ertan TOKER
ABSTRACT
When processing gravity data, the filters are used in space and frequency environments. The filters allow more selectable parameter estimations than raw data about the structure being examined. Filtering in a broad sense means monitoring the data under the constraints we want. While the filters allow some information to become more noticeable, they allow some information to be lost or become less noticeable from data. In this case, the losses in the data make the interpretation difficult and can cause errors. Derivative and phase filters provide quantitative information about the variation of data in different directions. The display of the change results in a positive or negative manner proportional to derivative sensitivity and phase sharpness, and this may be observed in this data. In the structural boundary analysis, since the sudden changes in the derivative cause oscillations, the boundaries become questionable. Limiting the data neighborhoods with a window by controlling the deviation without using derivative and the filters that allow boundary analysis non-derivative by floating this limitation are used to illuminate the boundary relationships.
https://doi.org/10.19111/bulletinofmre.546153
Keywords:
Gravity, Filter, Standard deviation, Long wavelength, Nonderivatives.
The Naşa intrusion (Western Anatolia) and its tectonic implication: A joint analyses of gravity and earthquake catalog data
Authors:
ERTAN TOKER, EMİN U. ULUGERGERLİ, ALİ R. KILIÇ
ABSTRACT
The gravity data gathered in and around the Simav Graben in Western Anatolia were reprocessed and reinterpreted by using the standard deviation fi lter and the Euler deconvolution. The joint evaluation of results from the interpretation of gravity data and seismological studies indicates the presence of new intrusive structures in the vicinity of Simav. The intrusion is located in the eastern margin of the graben and has a thickness of 12-15 km at 2.5-3 km depth below the surface. Numerous earthquakes recorded in the eastern part of the graben are associated with this intrusion. Besides, the multidimensional modelling study of the gravity data allowed us to display the Simav Graben, the fold of the Simav Fault, the intrusion named as Naşa, and the epicenters of earthquake within the same tectonic frame. All tectonic structures were marked on the three dimensional relief model.
http://dx.doi.org/10.19111/bulletinofmre.410597
Geological properties of Güney formation (Ereğli - Ulukışla Basin, Niğde)
Authors:
Ayfer ÖZDEMİR, Nurettin SONEL
ABSTRACT
The aim of this study to determine stratigraphic, sedimentological and petrographic characteristics of the Upper Paleocene - Lower Eocene Güney formation in the Ereğli - Ulukışla Basin based on the lithological and environmental interpretations related to petroleum source and reservoir rock properties of it. For this purpose, the geological characteristics of the Güney formation and its relations with other units were followed by field observations and the unit was investigated by making a stratigraphic cross section from bottom to top. In addition, during the field studies, four (4) scaled stratigraphic sections (OSK) were formed and fifty - two (52) sandstone samples were taken from these OSKs. The Güney formation starts with conglomerates at the basement and continues as sandstone - shale alternation. The fact that the sand size material is more than the clay size material, the sandstone layers are thick (at least 2 m) around the Kardeşgediği station, the presence of channel fillings, slump structures, and pebbles indicate that the sequence shows convergent turbidite character. However, in the vicinity of Ovacık - Güney village and Tatlıpınar ridges, shales having an average layer thickness of 30 cm (thick) and sandstones up to 3 - 5 cm (thin) and shales are denser than sandstones show the formation has divergent character. The Güney formation transitions laterally and vertically overlies the agglomerate unit of the Ulukışla formation and turbiditic sandstone - shale units of the Halkapınar formation. The Aktoprak formation passes laterally and vertically over the Formation. Petrographic studies show that the formation sandstones are lithic arenite and feldspathic arenite and are deposited in the fore - arc basin.
https://doi.org/10.19111/bulletinofmre.855696
Keywords:
Ereğli - Ulukışla Basin, Güney Formation, Sandstone, Sedimantology, Stratigraphy, Petrography
Thermomagnetic properties and geothermal energy potential in parts of Bida Basin, Nigeria have been evaluated using spectral analysis of integrated nine aeromagnetic data. The study area covering 27.225 km2 of aeromagnetic data was examined and construed in order to delineate the thermal properties of the country-rock in the area. The result of the visual inception of the residual map reveals that the area comprises an extremely irregular pattern of magnetic intensities that range from 220 to 240 nT. Two structural features of folding evidence were also delineated in the area namely; uplift and depression. The result of the lineament structures from the shaded relief map and Rose diagram depicts NE-SW as the major trend with the minor trend is NW - SE. Two depths to magnetic sources were distinguished in the area: the shallower bodies which vary from 1.27 to 1.96 km and the deeper bodies that vary from 2.01 to 4.27 km. The result also shows an average depth to the centroid as 12.97 km in the area. The thermomagnetic properties analysis show average values of 23.12 km Curie isotherm, 25.27 °C/km geothermal gradients and 63.17 mWm2 heat flow in the area. The study concludes that the study area possesses good potential quality for geothermal energy generation and exploration.
https://doi.org/10.19111/bulletinofmre.695138
Keywords:
Lineament, Rose Diagram, Magnetic Sources, Curie Isotherm, Thermal Properties
Petrography and geochemical decomposition parameters of crystalline rocks; Demirköy intrusive body (DIB), NW Turkey
Authors:
Ezgi ULUSOY, Yusuf Kağan KADIOĞLU
ABSTRACT
The crystalline rocks represent the most weathering rock groups due to their textural and mineralogical decomposition. This study, focused on the petrographic properties and geochemical variation of the altered rocks from Demirköy Intrusive Body (DIB) located at NW Turkey were examined based on the location of structural and morphological properties. DIB consists ofintrusive rocks in the composition of ranging from granite to gabbro. The sampling made from the dominant rock units composing of granodiorite and quartz diorite, within the DIB a cross weathering section divided into three levels as regolit, saprolite and saprock. For each level of all the section Ruxton ratio (Ro), chemical alteration index (CIA), chemical weathering index (CIW), plagioclase alteration index (PIA) were determined. The results show a linear decrease from the surface to the core of the host rock. The chlorite-carbonate-pyrite index (CCPI) versus Ishikawa alteration index (AI) variation diagram shows that decomposition in profiles occurred in diagenetic alteration and where the hydrothermal alteration effect is not observed. On the other hand, Mg, Fe, Ti, Ca decreased remarkably while the ratio of the elements such as Si, Na, K, Al increased. The increasing and decreasing of geochemical elements are related to their physical strength and chemical behavior. Chemical variation diagrams of all the levels revealed that the regolites exhibit chemical compounds from hydrothermal fluids in the immediate vicinity of the source rocks.
https://doi.org/10.19111/bulletinofmre.793795