Shear, Related, Gold, Pan - African Orogeny, Metallogeny, Sudan
Abstract:
Study area is located in the eastern sector of Saharan Meta - Craton that includes the western part of Bayuda Terrane and extend southwest to Sodri - Um Badir shear zones. The sector is dominated by metasediments, metavolcanic - sedimentary series represented by chlorite - schist, quartzite, calc - silicate, and marble. Low - grade metamorphic arc - related volcano - sedimentary sequence occurs as thin narrow bands and subjected to tectono - thermal events of Pan - African orogeny during the Late - Proterozoic era (900 - 550 Ma). All these rock sequences have been intruded by syn to Late Orogenic Granitoids and post - orogenic ring - shaped complex and felsic dykes. The intrusions are thought to be the source of hydrothermal fluids that caused the precipitation of gold. Similar characteristics of geological features and tectonic settings support the possibility of the extension of gold mineralization between shear zones. The comparison between the three gold mineralizations reveals variations in minerals assemblages, pathfinders and gold grade. The result of this study defines a new metallogenic province in the west of the River Nile, which occupies a very large area covered by Phanerozoic sediments. Numerous mineral deposits of economic potentiality have been targeted along the shear zones and related fractures and faults. Among those potential deposits, five of them have been chosen as targets for future gold exploration and evaluation.
An alternative approach to estimate the shear strength parameters of intact rock
Authors:
Kamil KAYABALI, Atakan BALCI
ABSTRACT
Engineering structures built on or within rock masses require a proper characterization of their geomechanical properties. In this context, determining the strength parameters of intact rock is essential. Triaxial compression (3XC) tests are routinely employed to determine the cohesion (c) and friction angle (ϕ) of intact rocks. However, this test not only involves inherent uncertainties but also typically requires a full day to complete a single set of samples. The objective of this study is to evaluate a more practical approach for determining the c and ϕ of intact rocks. For this purpose, 20 types of intact rock were tested via 3XC, uniaxial compression (UC), and single-shear (SS) methods. The internal friction angles were determined from UC tests, while the cohesion values were obtained from SS tests. The c-ϕ pairs derived from the 3XC tests were compared with those obtained from the UC and SS tests. The results indicate that SS tests tend to overestimate cohesion compared to 3XC tests, whereas UC tests generally underestimate friction angles. Overall, the findings suggest that the proposed approach has potential as an alternative testing method in rock mechanics
Keywords:
Intact Rock, Shear Strength Parameters, Triaxial Compression Test, Uniaxial Compression Test, Single- Shear Test
This study presents the occurrence of invisible gold and associated trace elements in pyrite from the Late Permian Kővágószőlős Sandstone Formation within the Western Mecsek uranium ore deposit, Hungary. Eight pyrite-rich drill-core samples were analyzed using optical microscopy, EMPA, LA-ICP-MS, and sequential extraction coupled with ICP-OES. Optical microscopy and EMPA analyses identified three pyrite morphologies: framboidal (1–20 μm), cement (50–200 μm), and euhedral (1–20 μm). Framboidal pyrite, of bacterial origin, occurs within organic matter, whereas cement and euhedral pyrites are associated with quartz and feldspar. Cement pyrite occasionally hosts minor sulfosalt and galena inclusions. LA-ICP-MS detected gold in pyrite grains (average 0.33 ppm), while sequential extraction with ICP-OES confirmed gold at 0.42 ppm. Elevated concentrations of As, Zn, and Cu range from 0.2 to 2.3%, along with trace elements such as W (0.05-0.13 ppm), Ba (7- 40 ppm), and Ni (95-244 ppm), were also identified. Gold is interpreted to occur primarily as a solid solution within the pyrite lattice, whereas other trace elements are likely associated with metal nanoparticles on or within the pyrite grains. These findings emphasize the complex geochemistry of pyrite and highlight the necessity for further studies, including sulfur isotope analysis, to elucidate ore-forming processes and gold mineralization mechanisms.
Keywords:
Invisible Gold, Pyrite, Arsenic, Western Mecsek, Uranium Ore Deposit
Kamil KAYABALI, Honne NAGARAJ, Deniz YILMAZ, Muhammet BEYHAN
Indexed In · Volume 176 / April 2025
Reply to: “Discussion: Determination of Atterberg Limits Using the Vane Shear Test Method [Bull. Min. Res. Exp. (2024) 174: 1–10]”
Authors:
Kamil KAYABALI, Honne NAGARAJ, Deniz YILMAZ, Muhammet BEYHAN
ABSTRACT
The main focus of the criticisms raised by O’Kelly and Soltani (2025) (hereafter referred to as discussers) to the authors’ article in Bulletin of Mineral Research and Exploration (174, 1-10) is to examine the veracity of the strength-based equations presented by Kayabalı et al. (2024). The discussers applied the predictive equations proposed by the authors to dissimilar soils in the two articles (Kayabalı et al., 2015a; Kayabalı et al., 2015b) published earlier by the lead author with his research group. The discussers showed that the predictive equations 6 and 7 given by Kayabalı et al. (2024) yield extremely high values of liquid limit (LL) and plastic limit (PL) when applied to dissimilar soils. Further, discussers argued that the approach proposed
by Kayabalı et al. (2024) led to erroneous results in determining soil classes.
Geological and geochemical characteristics of Cünür volcanogenic massive sulfide mineralization (Kastamonu, Turkey)
Authors:
Kurtuluş GÜNAY
ABSTRACT
Çangaldağ Metamorphic Complex (CMC) in Central Pontides is an accretionary complex consisting of Jurassic units. Mafic, felsic metavolcanics, metamorphic equivalents of deep marine sediments and mafic meta-lava/sill intercalations are the most distinct units of the complex. Cünür Volcanogenic Massive Sulphide (VMS) mineralization is associated with metavolcanic units of CMC. Metavolcanic units in the mineralization area contain volcanic rocks with compositions ranging from sub-alkali basalt to andesite and dacite (50.3 - 74.6 % SiO2). For 0.1 % Cu cut-off grade, 3,372,000 tons (t) of mineral resource with 0.28 % Cu, 0.50 % Zn and 0.19 ppm Au has been estimated. Ore paragenesis of the Cünür mineralization predominantly consists of pyrite, chalcopyrite and sphalerite, and lesser amounts of magnetite. The main ore textures are massive, semi-massive, disseminated, brecciated and fracture fillings. Pyrite-chalcopyrite grading and preserved silicified clasts within the massive ore indicate that mineralization has developed in relation to replacement processes. The most significant grade intercepts reported for the mineralization are 9 %, 9 %, 0.3
%, 3300 ppb and 79 ppm for Cu, Zn, Pb, Au, Ag, respectively. Cünür mineralization has similarities to bimodal-mafic (Noranda type) Cu-Zn dominated VMS deposits.
https://doi.org/10.19111/bulletinofmre.820436
Keywords:
Island arc, Volcanism, Bimodal-mafic, Volcanogenic Massive Sulfide (VMS)
In the present study a detailed characterization followed by beneficiation of low grade iron ore was studied. The Run of Mine (R.O.M) sample assayed 21.91 % Fe, which is very low grade in nature. The impurities are SiO2 26.25%, MgO 20.48%, CaO 5.85%, Al2O3 1.86% and loss on ignition (LOI) 12.71%. A Davis Tube test was performed for the assessment of the separability of magnetic ores by low intensity magnetic separators. The heavy liquid test was carried out to evaluate the possible response of the sample by the gravity concentration technique. The samples were subjected to jigging, dry low intensity magnetic separation (DLIMS) and shaking table tests. Thus a sufficient concentrate could not be obtained in +1 mm by using jigging and DLIMS. The obtained results show that the a high grade iron concentrate (>65% Fe) with lower recoveries was obtained from shaking table tests by using -1 mm fraction. According to the results a flowsheet was developed. From the developed flowsheet, it is possible to obtain pellet grade concentrate with 65.41% Fe, 2.54% SiO2, 2.79% MgO, 0.70% CaO and 0.32% Al2O3. with 21.42% weight recovery. The overall gangue rejection recovery of the circuit is over 95%.
https://doi.org/10.19111/bulletinofmre.834182
Keywords:
Low grade iron ore, Gravity concentration, Magnetic separation, Flowsheet development
Systematic and biostratigraphic evaluation of the Late Cretaceous benthic foraminiferal assemblages of southeastern Batman
Authors:
Derya SİNANOĞLU
ABSTRACT
The study area is located in 15 km west of Gercüş town (southeast of Batman) at the northern margin of the Arabian Plate. This region is the only place where Garzan formation, one of the important petroleum reservoir of the Southeastern Anatolia, outcrops and detailed scientific studies have been carried out. The unit, mainly of beige-yellowish, thin-thick bedded, benthic foraminifera and algae bearing limestones, has a rich fossil content and high diversity. This diversity in the benthic foraminifera is noteworthy. These assemblages contains Vandenbroekia munieri Marie, Coskinolina sp., Cyclogyra sp. with porcellaneous test; Biconcava bentori Hamaoui, Nezzazata simplex Omara, Nezzazatinella picardi (Henson), Trochospira avnimelechi Hamaoui, Antalyna korayi Farinacci and Köylüoğlu, Moncharmontia apenninica (De Castro), Moncharmontia compressa (De Castro), Fleuryana adriatica (De Castro), Pseudocyclammina sphaeroidea Gendrot, Broeckinella arabica Henson, Cuneolina pavonia d’Orbigny, Cuneolina ketini Inan, Dicyclina schlumbergeri Munier- Chalmas, Pseudolituonella reicheli Marie, Dictyoconella complanata Henson, Minouxia lobata Gendrot, Minouxia gümbelitrioides Marie, Arenobulimina sp. with microgranular and agglutinated tests and Fissoelphidium operculiferum Smout, Orbitoides medius (d’Archiac), Orbitoides megaloformis Papp and Küpper, Omphalocyclus anatoliensis Özcan, Sırtina orbitoidiformis Brönnimann and Wirtz, Goupillaudina sp. with hyaline test. In this study, the age of Garzan formation has been determined as Maastrichtian based on benthic foraminifera.
https://doi.org/10.19111/bulletinofmre.8099144