RESPONSE TO THE “REACTION OF THE PHYSICAL TRANSFORMATION OF THE GRAVITY DATA AND LINEARITY DILEMMA”
Authors:
Uğur AKIN
ABSTRACT
There is not any filter such as the “apparent gravity linear filter”, which is mentioned by the criticizer, in the literature of geophysical potential methods.
The “apparent density filter” was used in the study. As the name implies; the crustal structure of Turkey was investigated in the article of “Investigation of the Seismic Velocity Distribution and the Crustal Structure of Turkey” (Akın, 2016). So; the article had different findings. The “Conrad discontinuity” has been one of the findings of this article. Or else; the distribution related to the Conrad discontinuity has not been the main topic of the article as it had been understood by the criticizer. In this study, the density and seismic velocity took their highest values within first 20 km’s of the continental crust as; 2.74 gr/cm³ and 5.86 km/s, respectively. This zone was considered at the same time as the Conrad discontinuity between the lower and upper crusts, and it had an approximate depth of 16 km.
Keywords:
RESPONSE TO THE REACTION OF THE PHYSICAL TRANSFORMATION OF THE GRAVITY DATA AND LINEARITY DILEMMA
INVESTIGATION OF THE SEISMIC VELOCITY DISTRIBUTION AND CRUSTAL STRUCTURE OF TURKEY BY MEANS OF GRAVITY DATA
Authors:
Uğur AKIN
ABSTRACT
In this study, the apparent gravity density data was measured for Turkey using apparent density filter, and the seismic velocity distribution map was generated from this data cluster. By interpreting these two measured data clusters, three dimensional structure of the Conrad discontinuity was investigated. The apparent gravity filter is a kind of filter which is used in the apparent gravity measurements for different depth levels different than gravity data. In this study, considering previously measured distribution of the continental crustal thickness of the Anatolia, the density maps for different depth levels were formed and interpreted. The lowest and highest densities in different levels of Turkey are 2.23 gr/cm3 , and 3 gr/cm3 , respectively; and the mean density is 2.698 gr/cm3 . The lowest and highest seismic velocities for different thicknesses were measured as 3.20 km/sec and 6.83 km/sec, respectively. However; the mean seismic velocity of Turkey for depths increasing up to 10 km until MOHO discontinuity was estimated as 5.66 km/sec The density and seismic velocity in the first 20 km of the continental crust have reached its highest values as 2.74 gr/cm3 and 5.86 km/sec, respectively. This zone is also the Conrad discontinuity between the lower and upper crusts, and its average depth is 16 km in Turkey. The Conrad discontinuity boundary, which developed between SIAL-SIMA, not to be observed in the East Anatolian High Plateau made us consider that SIMA had disappeared as a result of the geological evolution, and the available crust could only be SIAL in origin.
INVESTIGATION OF CRUSTAL STRUCTURE OF TURKEY BY MEANS OF GRAVITY DATA
Authors:
Selim ARSLAN, Uğur AKIN, Atakan ALACA
ABSTRACT
During this work, the regional gravity data acquired earlier were used and in order to investigate the relations between geology - tectonics and elevation, isostatic map of Turkey, free air anomaly map and Bouguer anomaly maps were obtained, and comparisons with respect to elevations were carried out. For the thickness of the earth crust T 0 32 - 0.08g relation was used. The best relation was obtained from Bouguer anomaly with +0.65 coefficient; the relation function was obtained as Y = - 72E + 7.77. Thickness of the crust of Turkey is estimated to be 31.4 km where it is the shallowest and 50 km where it is deepest.
HEAT FLOW OF THE KIRŞEHİR MASSIF AND GEOLOGICAL SOURCES OF THE RADIOGENIC HEAT PRODUCTION
Authors:
Uğur AKIN, Yahya ÇİFTÇİ
ABSTRACT
It is not often easy to distinguish the components of the mantle originated heat flow and radiogenic heat generation from each other. Surface heat flow is composed of two components. The first is the radiogenic heat source and the second is the heat flow originated from the upper mantle and the lower crust. In this study, heat flow and the radiogenic heat production of the Kýrþehir Massif and its geological sources were investigated. Curie point depths were calculated from aeromagnetic data. Geothermal gradient values were formed by considering the medium as homogenous and isotropic. The heat flow of the region was calculated using the heat transfer values of rock samples collected from field and it was determined that this value had ranged between 53 mWm-2 and 108 mWm-2. As a result of the evaluation of heat flow and heat production maps together, it was calculated that 60-92% of the average heat flow values of the region are mantle and 8-38% are radiogenic sourced. The radiogenic heat production in the study area, generally showed high anomaly values in young granitoids as predicted.
THE USE OF TILT ANGLE IN GRAVITY AND MAGNETIC METHODS
Authors:
UĞUR AKIN, Betül IŞIKDENİZ ŞERİFOĞLU, Mehmet DURU
ABSTRACT
Tilt angle method, which has been recently used in investigating the boundaries of structures, reveals useful information on deep and shallow structures. Tilt angle is expressed as the arctan value of the ratio of the vertical derivative of the potential field to its horizontal derivative. The method was applied to Kýrþehir-Ý31 Sheet. As a result, the presence of volcanites buried under terrestrial sediments was demonstrated.
THE ASSESSMENT OF GEOTHERMAL POTENTIAL OF TURKEY BY MEANS OF HEAT FLOW ESTIMATION
Authors:
UĞUR AKIN, Emin U. ULUGERGERLİ, Semih KUTLU
ABSTRACT
In this study, the heat flow distribution of Turkey was investigated in the interest of exploring new geothermal fields in addition to known ones. For this purposes, the geothermal gradient was estimated from the Curie point depth map obtained from airborne magnetic data by means of power spectrum method. By multiplying geothermal gradient with thermal conductivity values, the heat flow map of Turkey was obtained. The average value in the heat flow map of Turkey was determined as 74 mW/m2. It points out existence of resources of geothermal energy larger than the average of the world resources. in terms of geothermal potential, the most significant region of Turkey is the Aydin and its surrounding with a value exceeding 200 mW/m2. On the contrary, the value decreases below 30 mW/m2 in the region bordered by Aksaray, Niğde, Karaman and Konya. The necessity of conducting a detailed additional studies for East Black sea, East and Southeast Anatolia is also revealed.
Keywords:
Heat flow, Curie temperature, Curie point depth, geothermal gradient
Gökova gulf situated in the Aegian extension zone in Turkey has been considered very interesting for numerous research workers. Gökova gulf is located in the N-S regional extentional tectonic regime. N-S extension of western Anatolia initiated development of E-W extended grabens here. The bay extends 100 km E-W and 25 km N-S directions. Datça peninsula is in the south, Bodrum peninsula is located in the north of the Gökova gulf. In recent years ‘Full Tensor Gradiometer Potential Field’ methods (FTG) has found a practice area in between the gravimetric and magnetic methods. In the past as it was in the gravimetric methods vertical component of the magnetic field measurments used to be recorded. In recent years total field (x, y, z components) measurments have become more applicable. This method has been applied to the airborne magnetic field data. Total magnetic data components of the airborne survey have been calculated and FTG method has been used. Gökova gulf is seismicly very active. There is a magnetic anomaly recorded in the Gökova gulf. To be able to bring a new outlook to the geology of the bay, the magnetic anomaly has been analysed by using ‘Full Tensor Magnetic Gradiometer’ (FTG) method. At first Tx, Ty, Tz magnetic field components of the airborne anomaly have been calculated. To the calculated components Txx, Txy, Txz, Tyy, Tyz, Tzz derivatives have been applied to have an impression of the geological feature causing the anomaly. The anomaly in the bay indicated that ultramafic rocks, ophiolitic melange in the Datça peninsula continue under the sea to the Gökova gulf. Data indicate that northern boundary of the peridotites continues up to about 9 km to the northern coast of the bay. The method is considered to be useful to help mapping of the geological features with different magnetic sensitivities.