Volume 157 · 2018 · 13 ARTICLES
All Articles In This Issue
01
Indexed In · Volume 157 / 2018
Geochemical and Petrologic Evolution of Otlakbaşı Basaltic Volcanism to the East of Lake Van
Authors: ABSTRACTCollision-related Otlakbaşı volcanism to the east of Lake Van occurred by eruptions from extensional fissures. In this study, it is investigated new Ar-Ar age data and major, trace and rare earth elements characteristics of the Otlakbaşı basaltic volcanism. The Ar-Ar age data indicate that this basaltic volcanism erupted in Early Pliocene time in contrast to its previously known as Quaternary age. The volcanic products are basaltic composition and close to alkaline-subalkaline division line. Results of fractional crystallization accompanied by assimilation (AFC) modeling imply that fractional crystallization can be negligible compared to crustal contamination in the evolution processes of the magma chamber and ratio of the crustal contamination to the fractional crystallization (r values) varies from 0.1 to 0.35. Enrichment of large ion lithophile elements (LILE) and light rare earth elements (LREE) relative to high strength field elements (HFSE) and behavior of mobile elements (Ba and Th) reveal that the mantle source region of the Otlakbaşı basaltic volcanism might have been enriched by melts that were derived from subducted sediments. Depletion in Rb and K elements of the fractionated-corrected samples indicate that amphibole and/or phlogopite could be the presence in the mantle source. Results of partial melting model studies show that this basaltic volcanism can be predominantly produced by the melting of the spinel peridotite source. Metasomatized spinel bearing lithospheric mantle may be responsible for the eruption of the Otlakbaşı basaltic volcanism.
DOI: 10.19111/bulletinofmre.427782
Keywords:
02
Indexed In · Volume 157 / 2018
The Relationship of Landslides with lithological units and fault lines occurring on the East Anatolian Fault Zone, between Palu (Elazığ) and Bingöl, Turkey
Authors: ABSTRACTIn this study, the relationship of landslides with lithological units and fault lines on the East Anatolian Fault Zone (EAFZ) between Palu (Elazığ) and Bingöl, was evaluated. In the study area, which is located within the EAFZ, Göynük to the northeast, Palu Segment to the southwest, Genç Segment to the south of Bingöl plain and Gökdere Uplift in the intersection area form the main tectonic structures. In addition, the Karakoçan Fault Zone (KFZ) cutting the EAFZ in NW-SE direction between Palu and Bingöl corresponds to another important structure (system). The area, which is located in a region where a number of faults intersect, is tectonically very active. This situation has affected the morphology and caused the formation of many landslides along fault lines. In order to determine the relationship between the landslides observed in this area and lithological and tectonic structures, landslide magnitude and distribution analyses were performed by means of Geographical Information Systems. For this purpose, the landslide inventory map and the database were reproduced controlling the satellite images in field studies. Similarly; geological and tectonic maps were prepared considering previous studies. Landslides created in vector format were converted into raster format and overlain with lithological and tectonic maps, and then the relationship between landslides and lithology-fault lines were determined. According to these results, 59% of landslides occur in Upper Miocene-Pliocene agglomerate and tuff units and 10% of them in Eocene carbonate units. According to these data, almost 70% of the landslides in the study area occurred in two units. Considering the relationship between landslides and fault lines 64% of the landslides are observed at 0-1000 m distances to the fault lines. As a result, there is an important relationship between lithological features and fault lines. The fact that landslides have occurred along the fault lines in the north of Murat Valley shows that the landslides are triggered more by earthquakes when compared with those triggered by the hydro meteorological events.
DOI: 10.19111/bulletinofmre.428277
Keywords:
03
Indexed In · Volume 157 / 2018
Post-Glacial Terraces of The Marmara Sea and water exchange periods
Authors: ABSTRACTSemi-enclosed Marmara Sea is a passage between the Aegean Sea (Northeastern Mediterranean Sea) and the Black Sea. The Marmara Sea is connected to the Black Sea and the Aegean Sea through the İstanbul Strait (Bosphorus) and Çanakkale Strait (Dardanelles), respectively. Despite the fact that the late Pleistocene-Holocene connections between the seas have been explored by many scientists, there are still uncertainties about the nature and timing of the connections. Within the scope of this study, a new approach has been displayed for post-glacial connections between the Black Sea, Marmara Sea, and the Aegean Sea. This study is based on 80 shallow seismic reflection lines, multibeam bathymetric data and 15 short gravity cores collected from the northeastern shelf of the Marmara Sea (between Silivri and Golden Horn). The sea bottom and sub-bottom morphology have a highly chaotic structure at the exit of the Büyükçekmece/Küçükçekmece lagoons and further east near the Marmara- İstanbul Strait junction. This chaotic bottom and sub-bottom surface morphologies are mainly controlled by the structure of the basin, current regime of the shelf, coastal drainage systems and by the sea/lake water level changes controlled by climate and the sill depths of the two straits, which in turn determined the water exchange between the seas. The sedimentological interpretation of the seismic reflection profiles and core sediments have allowed us to distinguish five stratigraphic units (S1-S5) and four sedimentary layers (A-D) over the acoustic basement. The lower stratigraphic unit and sedimentary layer are separated from the overlying acoustic basement by a chaotic to parallel and by a high amplitude seismic reflector. Seaward dipping units of the acoustic basement are inferred to be the seaward continuation of the Oligocene–Upper Miocene units widely exposed on land. The presence of three different marine terraces distinguished (T1-T3) along the northeastern shelf of the Marmara Sea have been associated with the six different curves of the post-glacial sea-level changes. From statistical point of view, the most significant terraces occur from -78 m to -80 m (T1), -58 m to -62 m (T2) and -28 m to -32 m at (T3). Considering the global sea level curves, these terraces can be dated 9.25, 12.25 and 13.75 Cal kyr BP, respectively.
DOI: 10.19111/bulletinofmre.401208
Keywords:
04
Indexed In · Volume 157 / 2018
Geology and critical review of the Upper Cretaceous Zagros chalky limestone (Kometan Formation) from Sulaimani Governorate, Northeastern Iraq
Authors: ABSTRACTThe chalky limestone (Kometan Formation) is aged Late Turonian–Middle Campanian and cropping out in the High, Imbricate and Thrust Zones of northeastern Iraq, Sulaimani area. It laterally changes to Bekhme and Mushurah formations toward northwest and west Iraq respectively and its reefal equivalents occurs too in subsurface of Central Iraq in the oil fields. Stratigraphically, it is located between Shiranish Formation (Middle-Late Campanian), at the top, and Gulneri Formation (Late Cenomanian-Early Turonian) at its base. It has the thickness of about 40-120 meter and deposited in pelagic realm. All previous studies have defined it as well bedded and fine grain limestone of deep marine facies with concentration of chert nodules and stylolites on or near bedding surfaces. The only recorded fossils are nannofossils, planktonic forms and rare benthonic forams. On the contrary, a most recent study has declined all the above features and changed lithology to massive, homogenous limestone with abundant Thalassinoides trace fossils. It additionally concluded that the bedding surfaces are not true bedding (pseudo-bedding) and formed by stylolization not by deposition. The present study is focusing on update the geology of the Cretaceous chalky limestone and critical review in addition to comparison of all the above ideas and introducing new ones. The features of the Thalassinoides, massiveness and pseudo-bedding of previous authors discussed and their absence confirmed and justified by field and laboratory works. Moreover, the massiveness is refused and well bedding (relatively has thin beds) is proved as an intrinsic characteristic of the formation in all section. The study also shows absence of relation of the chert nodules and chert bedding with traces fossils due to absence of bioturbation, detrital clasts, bioclasts, sorting, lamination and color change. Moreover, the idea of deposition of Kometan Formation in Zagros Foreland basin refused and assumed as deposition of continental margin of Neo-Tethys Sea (or ocean) before ophiolitic obduction and foreland generation.
DOI: 10.19111/bulletinofmre.428342
Keywords:
05
Indexed In · Volume 157 / 2018
Petrography, mineral chemıstry and crystallizatıon conditions of cenozoic plutonic rocks located to the north of Bayburt (Eastern Pontıdes, Turkey)
Authors: ABSTRACTThe Eastern Pontides comprises of many intrusive bodies varying in composition, size and age from Paleozoic to Cenozoic. Those of especially Cenozoic aged ones are commonly observed in the southern part while are rarely exposed in the northern part of the Eastern Pontides. In this study, the petrographical and mineral chemistry properties of Çiçekli, Somarova, Sorkunlu, Şaşurluk, Aydıntepe, Kemerlikdağı and Pelitli plutons located to the north of Bayburt area are determined, and the crystallization conditions of the studied bodies were estimated by means of thermobarometer calculations. The studied plutons extend mostly NE-SW directions and are approximately ellipse in shapes. The contacts between the plutons and surrounding rocks are sharp, and plutons commonly contain mafic microgranular enclaves (MMEs) of different size. Petrographic and mineral chemistry studies reveal some disequilibrium textures reflecting magma mixing process. Based on modal mineralogy, the plutonic rocks are gabbroic diorite, diorite, tonalite, granodiorite and monzogranite in composition. The rocks have fine to medium granular, porphyric, monzonitic, poikilitic, myrmekitic and micrographic textures. The main minerals are composed of labradorite and albite (An68-02), magnesiohornblende and actinolite (Mg# = 0.6-0.9), diopside and augite (Wo44-46), clinoenstatite (En53-57) and Fe-Ti oxide minerals. Crystallization temperatures calculated from amphibole, biotite, clinopyroxene, magnetite and ilmenite minerals are 405 °C to 1161 °C, pressure values are 0.1 to 2.7 kbar, oxygen fugacity (log10 ƒO2) are -20 to -12. Estimation of water content calculated by using amphiboles is between 2.9 and 6.8%. Based on obtained data, it is suggested that the studied plutons have emplaced in shallow depths (~ 1-8 km).
DOI: 10.19111/bulletinofmre.427829
Keywords:
06
Indexed In · Volume 157 / 2018
Petrography and petrology of The Yürekli (Balıkesir) volcanics: an example of post-collisional felsic volcanism in the Biga peninsula (NW Turkey)
Authors: ABSTRACTIn this study, the aim was to determine the petrography, geochemistry and source of the Yürekli volcanics (Biga Peninsula, NW Turkey). Tertiary volcanism is widespread in Western Anatolia (NW Turkey), which is an important area where tectonic and magmatic events are observed together. Yürekli volcanic rocks comprise dacitic lavas and pyroclastics. Dacitic lavas show porphyric and hyaloporphyric texture, and consist of plagioclase, quartz, amphibole, biotite, sanidine and Fe-Ti oxide minerals with apatite and zircon accessory minerals. Petrologically, they have high-potassic and calc-alkaline characteristics. Yürekli volcanics show enrichment in large ion lithophile elements (LILE) and are depleted in high field strength elements (HFSE) on the N-MORB normalized diagram. On the chondrite-normalized rare earth element (REE) plot, light rare earth elements are enriched but heavy rare earth elements are depleted in the rocks. REE patterns are concave shaped (mean LaN/LuN=16–25) and show slight negative Eu anomalies (0.66–0.81). Plagioclase, amphibole and biotite fractional crystallisation and crustal assimilation are important in the evolution of the Yürekli volcanics. According to all data, it can be argued that the Yürekli volcanics formed in a post-collisional setting, and the parental magmas were derived from the melts of enriched lithospheric mantle.
DOI: 10.19111/bulletinofmre.428294
Keywords:
07
Indexed In · Volume 157 / 2018
Mineral chemistry, whole-rock geochemistry and petrology of Eocene I-type shoshonitic plutons in the Gölköy area (Ordu, NE Turkey)
Authors: ABSTRACTThe Eocene intermediate to felsic plutons are widespread in varying sizes and compositions throughout the Eastern Pontides Orogenic Belt in NE Turkey. Of these, two monzonitic bodies (namely the Eriko Tepe and Göl Tepe Plutons) in the Gölköy (Ordu) area, extend nearly in the orientation of NW-SE and E-W and were emplaced into the Upper Cretaceous and/or Eocene volcanic and sedimentary rocks. Petrographically, the studied monzonitic plutons are compositionally fine to medium grained monzonite, monzodiorite and subordinate quartz-monzonite. They consist of plagioclase (An35-67), K-feldspar (Or61-96), quartz, clinopyroxene (Wo28-49En35-51Fs10-25), biotite (Mg#: 0.53-0.73) ± hornblende (Mg#: 0.65-0.82), Fe-Ti oxide with monzonitic, poikilitic, perthitic, rare antirapakivi and graphic textures. Mineral thermobarometer estimations imply that the plutons were crystallized in P-T conditions of mid to shallow crustal levels. Petrochemically, these monzonitic plutons show post-collisional, I-type, metaluminous (A/CNK=0.76-0.93) and shoshonitic features. The whole-rock major oxide and trace element variations suggest that fractionational crystallization played a significant role in the evolution of these monzonitic plutons. The primitive mantle-normalized trace element patterns of the studied plutons are similar to each other with enrichment in large ion lithophile elements, Th, Ce and negative Nb and Ti anomalies. Moreover, the chondrite-normalized rare earth element plots of the plutons show moderately enriched concave-shaped patterns (LaN/LuN=9.3-12.6) with negative Eu anomalies (EuN/Eu*=0.69-0.84), all of which imply plagioclase and clinopyroxene ± hornblende fractionations during their evolution. The geochemical data suggest that the monzonitic plutons have evolved from parental magmas derived from the melts of enriched lithospheric mantle in a post-collisional setting.
DOI: 10.19111/bulletinofmre.371623
Keywords:
08
Indexed In · Volume 157 / 2018
Geochemical characteristics of Gabbroic rocks in Zyarat in North East of Iran
Authors: ABSTRACTThe mafic rocks outcrops exposed in the South of Gorgan, northeastern of Iran. These gabbroic rocks are intruded into the Middle–Upper Paleozoic sedimentary rocks and Gorgan schist units representing a part of the north Gondwana province. Petrography studies of these rocks show medium to coarse grained sizes and the texture varies from ophitic to intergranular under polarized microscope. The mineralogical composition of mafic dykes is dominated by large crystals of clinopyroxene + orthopyroxene + plagioclase and hornblende. These rocks can be classified as gabbroic rock. Geochemical studies show that these rocks have low to medium K2O contents. The trace element data shows low La/Nb ratios and LREE enrichment (La/Yb 10–21.4). The high LREE/HREE ratios and low Y content corresponding high Ti/Y ratios of the gabbros suggest that they could be derived from melt fractions of a garnet stable source. Considering that the REE plot and tectonic diagrams of the region's gabbro are similar to that of OIB (Ocean island basalt), the former's origin is the same as that of OIB magmas.
DOI: 10.19111/bulletinofmre.413716
Keywords:
09
Indexed In · Volume 157 / 2018
Physicochemical properties and availability of Tahar-Güzelöz (Nevşehir) diatomite
Authors: ABSTRACTIn this study, the use areas of diatomites located within the late Miocene-Pliocene volcano sedimentary units, which formed due to the volcanism and outcropped around the Tahar and Güzelöz localities, Nevşehir, were investigated in terms of raw materials. To do this, three stratigraphic sections were measured in the study area, one of which was measured in the Tahar area (TK), and two others were measured in the Güzelöz area (GÜ1 and GÜ2). Various physicomechanical, chemical, mineralogical and analytical methods were applied on the collected samples. The analysis results of diatomites in the investigated area were determined as follows; the amount of acid-insoluble matters; 74,20 - 84,20%, the amount of water-insoluble matters; 99,80 %, the loss on ignition ratios (950 °C de); 8,18 - 22,82 %, whiteness; 80,45 - 84,79%, the particle sizes; 0,7-209 µ , pore sizes; 1,448 e-03A – 5,888 e-04A, pore volumes; 1,148 e-02 – 8,515 e-02 cc/g, specific gravities; 2,33 – 2,49 g/cm3 , total porosities; 57 –60%, cumulative specific surface areas; 4,047 e+01 – 5,160 e+01 m2/g, pH; 5-7 (acid and neutral), filtration rates; 138 – 351 ml/min and SiO2 contents; 38,16 – 67,77%. It was determined that samples did not contain any palynological material and these generally were formed from long and coarse diatom genus and species. The evaluation of analysis results showed that diatomites of none of three locations were suitable as construction material, carrier, abrasive, cleaner and insulating material. At the same time, it was also determined that diatomites of the Tahar and Güzelöz–1 locations could not be used as the filling material. In addition, it was also detected that these diatomites could be used in the manufacture of silicate and as percolator by the SiO2 enrichment. Also, the diatomites of Güzelöz-2 can be used as the filling material in rubber and paper industries.
DOI: 10.19111/bulletinofmre.428305
Keywords:
10
Indexed In · Volume 157 / 2018
Investigation of thermal and mechanical behavıors of construction materials obtained from some natural stone waste
Authors: ABSTRACTIn this study, thermal and mechanical behaviours of composite building materials obtained from different kinds of natural stone wastes were investigated. First of all, XRD, chemical and grain size distribution analyses were carried out to identify the natural stone wastes to be used. 60% granite (magmatic), 35% recrystallized limestone (metamorphic) and 5% pure aluminium oxide (Al2O3) materials were used in the prepared mixture. The prepared mixture was shaped in a steel mould 75x20x50 mm in size by adding 7% shaping water and fired at 1140 ° C, 1150 ° C and 1160 ° C. Following that XRD analyses, colour determination, water absorption coefficient, bending strength, Young’s Modulus, bulk density, apparent density and open porosity tests were performed on the samples. According to the XRD analyses results gehlenite, anorthite and wollastonite phases were detected. In accordance with the results of other experiments and analysis, it was found that bending strength, Young’s Modulus and mass density values have increased, but on the other hand water absorption coefficient, apparent density and open porosity values had decreased after the firing process.
DOI: 10.19111/bulletinofmre.428318
Keywords:
11
Indexed In · Volume 157 / 2018
An ore adit planning with the help of three dimensional ore body modeling: A case study from Çulfa Çukuru Pb-Zn-Cu-Ag deposit
Authors: ABSTRACTÇulfa Çukuru Pb-Zn-Cu-Ag mineralization has occurred along the metamorphic and metamorphic-dacitic volcanic rock contacts of the Sakarya zone on the Biga Peninsula. The base metal mineralization (Pb-Zn-Cu-Ag±Au) developed along the contact and fracture planes of these rocks can be observed as veins, lenses and disseminated ore geometries in the calc-silicate rock assemblages. Base metal mineralizations are mainly controlled lithologically and are generally associated with recrystallized limestones. In this study, the surface and the subsurface were modeled using the topographical data and the geochemical data (%Pb and %Zn) collected from 42 boreholes of Çulfa Çukuru which is located 20 km South-Southeast of Kalkım (Çanakkale). The surface and the subsurface data were interpolated by Kriging and Inverse Distance Weighted methods, respectively. The intersectional areas of %Pb and %Zn modeling data obtained from this study were determined by dividing the areas above the cut-off grade into 4 different sectors (low, intermediate, high, and very high). Using the distribution of the intersections of these sectors, the possible adit lines were determined and also an interpreted map of the adit was drawn for 450 level. This modeling study helps to plan the ore adit to be opened in a mining area. Moreover, according to the important changing that may occur in conditions (e.g. fluctuations in metal prices or decreasing increasing costs), models can also be modified during operations.
DOI: 10.19111/bulletinofmre.372510
Keywords:
12
Indexed In · Volume 157 / 2018
Evaluation of Thrace Region fine coal tailings
Authors: ABSTRACTThe 79.9% of lignites in Turkey possesses a calorific value lower than 2500 kcal/kg. In order to reduce the energy dependence of the country, it would be right to evaluate these lignite reserves of 11.8 billion tons by effective coal preparation methods and use them with clean coal combustion systems together with developing technology. A typical coal preparation plant produces material within a ratio of 20% of the feed coal below 0.5 mm. Generally, due to the high cost, the gain of the fugitive coal in the product under this size is not preferred but this size group can be utilized owing to the developing coal cleaning technologies. Within scope of this study, the discarded coal slime below 0.5 mm size taken from the Uysal Mining Co. in Tekirdağ was subjected to the enrichment and dewatering processes to obtain a marketable product. In experimental studies, the slime with 81,25% ash content in 150 micron size group was removed from the system in order to produce a high quality product. Afterwards, the coal having 49.09% ash content was subjected to multistage Reichert Spiral tests and a clean coal product with 24,1% ash content was produced. In settling experiments, the product below 150 microns was used and at the end of these tests, the slurry with 30% solid in pulp ratio was produced. It can be concluded that the clean coal, which is produced after enrichment tests, could be used in energy sector, power plants, briquetting plants, cement plants etc.
DOI: 10.19111/bulletinofmre.428324
Keywords:
13
Indexed In · Volume 157 / 2018
Optimization of some parameters on desulfurization process of Muğla Yatağan Bağyaka lignite by ultrasonic waves
Authors: ABSTRACTIn this study, the desulfurization process developed using ultrasonic waves for Muğla Yatağan Bağyaka lignite had the optimum conditions for parameters affecting the ash and sulfur removal potentials determined with the Surface Response Method and a model created. The process parameters to obtain optimum desulfurization and ash removal were chosen as the ultrasonic treatment time, solid content, concentration of chemical reactive (H2O2) and reactive volume, and the optimum values were determined. Using this data with the aid of the Design Export 7.0 program, the regression model was found as a second degree polynomial equation. The coefficients of determination (R2) for desulfurization and ash removal regressions were 0.96 and 0.97, respectively, in the determined model. The model prediction values and experimental results for desulfurization and ash removal in the investigated parameter intervals were compared and the fit was identified. In the experimental removal of sulfur types with optimum desulfurization it was found that pyritic 17.02%, sulfate 16.67% and organic 9.52%
DOI: 10.19111/bulletinofmre.417405
Keywords:
No articles match your search.