Soft sediment deformation structures, lacustrine, slumps, rock falls, Bigadiç,
Abstract:
In the Western Anatolian region, NE-SW, E-W directional basins were developed which were limited to the extension-related faults beginning in the late Oligocene to early Miocene. The fi llings of these basins consist of fl uvial – lacustrine deposits containing volcanic and volcaniclastic intercalations. These deposits include intensive local unconformities and soft sediment deformation structures. The fi lling of the Bigadiç Neogene Basin which is one of these basins, constitute base limestone unit, lower tuff unit, lower borate unit, upper tuff unit and upper borate unit. The base limestone unit composed of claystone, marl, limestone, dolomitic limestone facies was deposited in the deep lacustrine environment. The soft sediment deformation structures were defi ned in the base limestone unit, which outcroped in the south of Bigadiç. These are: slumps, rock falls, chaotic structures, clastic dykes, synsedimentary faults and breccia limestone. Deformation mechanisms are related essentially to the increase of slopes of layers, liquidization and fl uidization. In the study area; regional tectonics, sedimentological data, and deformation structures are evaluated together, it is concluded that these structures are formed by tectonic and seismic (earthquakes related to tectonic origin and syndepositional magmatic activities).
Selçuk ALEMDAĞ, Rasim Taylan KARA, Hasan Tahsin BOSTANCI
Indexed In · Volume 169 / 2022
Evaluation of potential rock falls with three-dimensional analysis: Example of Oltanbey and Hasanbey districts (Gümüşhane city center)
Authors:
Selçuk ALEMDAĞ, Rasim Taylan KARA, Hasan Tahsin BOSTANCI
ABSTRACT
The central district campus of Gümüşhane, located on the Trabzon-Erzurum Highway, has a steep topography, and because of the effect of climatic and morphological structure, frequent rockfall events can cause loss of life and property from time to time. For these reasons, the slopes in some parts of the Oltanbey and Hasanbey districts of the central district of Gümüşhane, which pose a great threat in terms of rockfall potential, were chosen as the study area. In this study, three-dimensional rockfall analyzes were carried out using the RocPro3D program on the lines determined in the rockfall source zones with a high probability of rockfall. As a result of the analysis, it was determined that the rock blocks rolled from the O1, O2 and H1 source rock lines determined at the upper elevations of the study area threaten the settlements and road networks in Oltanbey and Hasanbey districts. With the 3D rockfall analysis, steel barrier was applied as a precautionary structure in the areas determined to be under the risk of rockfall, and the analyzes were carried out again considering the precautionary structures. By examining the results of the analyzes, the safest and most economical different barrier types have been proposed to eliminate the danger of rockfall.
https://doi.org/10.19111/bulletinofmre.977928
Keywords:
Steel Barrier, Rockfall Inventory Map, Rocpro3D, Three Dimensional Rockfall Analysis.
The lacustrine units have been deposited in the Ermenek, Bucakkışla, Korucuk and Çamlıyayla basins in the Central Taurides since early Oligocene. In this study, structural features and stratigraphical properties of Oligocene basins have been described in detail and the lacustrine units have been dated. Regional geological interpretations have been made by using tectono-stratigraphic and age data of the basins. Lacustrine Oligocene sedimentation in these basins, which were opened on the tectonic units of Taurides due to normal faults, constitute the first records of the sedimentation occurring under the extensional tectonic regime after the orogeny of the Central Taurides. All the pre-Oligocene units that had been emplaced in the region due to a north-south compressional movement in the Central Taurides, continued to be compressed until the end of Eocene, and completed their orogenic development as napped structures. The bedrock units, reaching the maximum elevation, have been subjected to “orogenic collapse” due to the strain or gravity forces as a result of an interruption or termination of the compression which lasted until the end of Eocene. Thus, “orogenic collapse” basins have started to be formed in the Central Taurides since Oligocene. The orogeny and the compressional tectonic regime forming the Taurides lasted until late Miocene in the Eastern Taurides. On the other hand, extensional basin formation since early Oligocene on the Taurus units, which had been emplaced in the region due to nappe tectonics, indicates that a new tectonic period has started in the Central Taurides.
https://doi.org/10.19111/bulletinofmre.681218
Plajköy spring discharges at the close locations to the SE shore of Lake Hazar. Lake Hazar is a tectonic Lake in Elazığ city. Plajköy spring is a fault spring that is mainly recharging from the volcanites, dikes and blocky volcanosedimentary units of Middle Eocene Maden Complex. These units have gained secondary permeability and porosity related with the active tectonics that is effective in the studied area. The present catchment system of the spring could not collect the springs and leaks discharging from different points around the system. The discharge of the catchment is measured by specifi c volume method while the other springs’ and leaks’ is measured by using triangular weir. Before the discharge measurement of the leaks and the springs, they have been directed to a channel. The discharge of the present catchment system and the leaks have measured twice in a month during one year period beginning from October of 2012 to November of 2013. The discharge coeffi cient of the spring is calculated 1.33*10-3 day-1. Discharge coeffi cient of the spring depends on the geometry and intensity of the active fracture systems in the region. Calculated discharge coeffi cient indicates that the spring discharge is related with the narrow fi ssures, fractures and pores. The total volume of discharged groundwater in the real regime of the Plajköy spring is calculated as 52* 103 m3 during the period from 31st of March, 2013 to the 13rd of October, 2013 by Maillet formula. The spring water is Ca- Mg- HCO3 type water related with the chemical analyses. The chemical and microbiological analyses of the spring water are correlated with the drinking water standarts of Turkey TS 266 (TSE, 2005) and World Health Organization (2004), and it is seen that the spring water is suitable for drinking. The Plajköy spring will be used more effi ciently without exposed to pollution by the new catchment plan and protection zone map that are consequently proposed in the present study.
http://dx.doi.org/10.19111/bulletinofmre.376767
Engin MERİÇ, İpek F. BARUT, Atike NAZİK, Niyazi AVŞAR, M. Baki YOKEŞ, Mustafa ERYILMAZ, Fulya YÜCESOY- ERYILMAZ, Erol KAM, Bora SONUVAR, Feyza DİNÇER
Indexed In · Volume 156 / 2018
The effect of submarine thermal springs of Doğanbey Cape (Seferihisar - İzmir) on foraminifer, ostracod and mollusc assemblages
Authors:
Engin MERİÇ, İpek F. BARUT, Atike NAZİK, Niyazi AVŞAR, M. Baki YOKEŞ, Mustafa ERYILMAZ, Fulya YÜCESOY- ERYILMAZ, Erol KAM, Bora SONUVAR, Feyza DİNÇER
ABSTRACT
The aim of this study was to fi gure out the effects of the submarine hot water springs located on the coast of Doğanbey Cape (north of Kuşadası Bay) on various micro- and macrofaunal assemblages living around these springs. Young sediment samples were collected from different depths at 15 stations. The benthic foraminifer, ostracod and mollusc faunas were investigated. 35 genera and 61 species of benthic foraminifers, 16 genera and 20 species of ostracods and 14 genera and 15 species of molluscs were identifi ed. Typical Aeegan foraminifer fauna was found to be dominant. Besides, individuals with colored tests or abnormal morphology, as well as alien species, which are frequently observed on the Aegean coasts were also observed in the study area. The foraminifer, ostracod and mollusc species also constituted typical Aegean fauna. It is known that the ecological conditions experienced of the Amphistegina lobifera Larsen individuals in typical Aegean benthic foraminifer assemblage have an effect on the abundance distribution. Ideal conditions for Amphistegina lobifera Larsen was found to be 18.00-32.00 m depth range and 19-20oC temperatures. CTD conductivity values gradually increased near to the hot water spring but a decrease in the number of individuals were observed. Chemical analyzes in sediment samples were performed with X-Ray Fluorescence Analysis Spectrometer (WDXRF). Heavy metal ingredients (Cr, Mn, Co, Ni, Cu, Zn and Pb) of the sediments were evaluated, concentrations were recorded as Cr>Ni>Mn in samples DB1-DB6 and also in DB15; Mn>Cr>Ni in DB8-DB11 and DB13-DB14; Cr>Mn>Ni in DB7 and in DB12. The radioactive elements U and Th were found to be high in DB9, DB10 and DB11. The chemical and radioactive properties of the sediments were observed to affect the tests of benthic foraminifers, where as no such effect was found on ostracod and mollusc tests.
http://dx.doi.org/10.19111/bulletinofmre.363329
Keywords:
Doğanbey Cape (İzmir), submarine hot water springs, benthic foraminifers, molluscs, ostracods,
Kamil KAYABALI, Pınar YILMAZ, Mustafa FENER, Ozgür AKTÜRK, Farhad HABİBZADEH
Indexed In · Volume 156 / 2018
Assessment of souil liquefaction using the energy approach
Authors:
Kamil KAYABALI, Pınar YILMAZ, Mustafa FENER, Ozgür AKTÜRK, Farhad HABİBZADEH
ABSTRACT
Damage to structures during earthquakes may be fully or partly caused by soil liquefaction, which has been the subject of extensive research for several decades. Liquefaction susceptibility of a sandy deposit is performed by comparing the resistance of a soil to liquefaction (i.e., capacity) to the load imparted by an earthquake (i.e., demand). In this regard, the stress-based method of liquefaction assessment is by far the most popular. It involves uncertainties mostly related to the computation of the maximum horizontal ground acceleration (amax) at bedrock. A site response analysis or a simplifi ed assumption is necessary to determine the amax on the ground level as well. Developing from the stress-based approach, the strain-based approach has also similar constraints. There exist laboratory techniques such as torsional shear to determine the capacity of a sandy soil in terms of liquefaction energy per unit volume. Likewise, the energy of a strong motion record can be set by employing simple physics principles. For this, a velocity time history and the unit mass of the soil are employed to compute the demand of any strong motion record. The scope of this investigation is to illustrate the usability of the energy-based method for the evaluation of soil liquefaction. The defi ciencies of the stress- and strain-based approaches are outlined and the advantages of the energybased approach are discussed.
http://dx.doi.org/10.19111/bulletinofmre.351257
Keywords:
Liquefaction, stress method, strain method, energy method, earthquake energy,