The lacustrine units have been deposited in the Ermenek, Bucakkışla, Korucuk and Çamlıyayla basins in the Central Taurides since early Oligocene. In this study, structural features and stratigraphical properties of Oligocene basins have been described in detail and the lacustrine units have been dated. Regional geological interpretations have been made by using tectono-stratigraphic and age data of the basins. Lacustrine Oligocene sedimentation in these basins, which were opened on the tectonic units of Taurides due to normal faults, constitute the first records of the sedimentation occurring under the extensional tectonic regime after the orogeny of the Central Taurides. All the pre-Oligocene units that had been emplaced in the region due to a north-south compressional movement in the Central Taurides, continued to be compressed until the end of Eocene, and completed their orogenic development as napped structures. The bedrock units, reaching the maximum elevation, have been subjected to “orogenic collapse” due to the strain or gravity forces as a result of an interruption or termination of the compression which lasted until the end of Eocene. Thus, “orogenic collapse” basins have started to be formed in the Central Taurides since Oligocene. The orogeny and the compressional tectonic regime forming the Taurides lasted until late Miocene in the Eastern Taurides. On the other hand, extensional basin formation since early Oligocene on the Taurus units, which had been emplaced in the region due to nappe tectonics, indicates that a new tectonic period has started in the Central Taurides.
TECTONO - SEDIMENTARY EVOLUTION OF BUCAKKIfiLA REGION (SW KARAMAN) IN CENTRAL TAURIDES
Authors:
Tolga ESİRTGEN
ABSTRACT
The study area located in Bucakk›flla region in Central Taurides consists of rock units of the
melange which form Bozk›r unit of the Tauride units and the overlying cover rocks. There are
volcanic, ophiolitic and sedimentary rocks which generated in different environmental
conditions. These rock groups comprise units which formed in Middle-Upper Triassic-
Paleocene periods in Inner Tauride Ocean that had been opened between Tauride – Anatolide
continents. Within the scope of this study, lithostratigraphic characteristics of Hu¤lu, Boyal›
tepe (hill), Korualan nappes and cover rocks which form Bozk›r Unit and tectono sedimentary
evolution of the study area was built up by paleontological and structural features. Due to
rifting, which started in Middle Upper Triassicin the region, the products of the rift volcanism
in rifting center and the carbonate deposition on margins of basin have occurred. Thecontinuation of extension which initiated rifting caused collapse in the basin in Middle Upper
Triasic – Lower Senonian. Deep marine deposition has occurred at the center of basin,
however pelagic and neritic limestones were deposited in basin margins during this time. The
region has become compressed by the effect of a new tectonical regime which had been
effective starting from Santonian. This compression caused new complexes to take place due
to reverse faults and thrust. The formation of these complexes has continued until the end of
Eocene period. However, there has not been observed any formation depending on the
compression in post Paleocene. The nappes have moved southward by the effect of
compression until Eocene. But then, these nappes could not advance forward anymore so,
northward back thrusts took place as basin was closured andreached the collisional stage.
Sequences which had become imbricated structures by back thrusts were subjected to
collapsing by the stop of compression and the gravitational effect. All sequences in the
imbricated structure were cut by dip slip normal faults and lacustrine basins were formed on
fallen blocks. The formation of Early Oligocene terrestrial deposits in these lakes indicates
that the collapse occurred in Oligocene or immediately before this time, and this allows the
dating of new tectonical period. Early Oligocene deposits to become tilted by dip slip faults
show that new tectonic period in the region has also continued after Oligocene.
Keywords:
Bozk›r unit, mélange, Inner Tauride Ocean, rift volcanism, orogenic collapse.
Şule GÜRBOĞA, Aslı Zeynep YAVUZOĞLU, Recep GÜNEY, Fatma BETÜL KARCI, Ayhan YAVUZOĞLU, Özgür TÜRKMEN, Pir Çağatay KARTAL, Bahri Serkan AYDEMİR, Murat EVREN, Murat CENK, Barbaros ŞİMŞEK, Eyyüp ÖZBEK, Tuğrul Şükrü YURTSEVER, Füsun YİĞİT FETHİ, Eşref AYLAN, Uğur Zeki KIRAT
Indexed In · Volume 163 / 2020
Tectonic meaning of the deformation in shallow marine region between Gaziköy-Mürefte (Sea of Marmara) by using seismic reflection data, NW Anatolia
Authors:
Şule GÜRBOĞA, Aslı Zeynep YAVUZOĞLU, Recep GÜNEY, Fatma BETÜL KARCI, Ayhan YAVUZOĞLU, Özgür TÜRKMEN, Pir Çağatay KARTAL, Bahri Serkan AYDEMİR, Murat EVREN, Murat CENK, Barbaros ŞİMŞEK, Eyyüp ÖZBEK, Tuğrul Şükrü YURTSEVER, Füsun YİĞİT FETHİ, Eşref AYLAN, Uğur Zeki KIRAT
ABSTRACT
Within the scope of this paper, seismic reflection and bathymetry studies were carried out in the shallow marine area forming the westernmost part of the Tekirdağ Basin using the R/V Selen Research Vessel within the MTA Marine Research Department. In the study area, ~ 500 km length bathymetry data and ~191 km shallow seismic profiles ( 41 lines) were collected. By means of the data, tectonic structures and deformation textures of the North Anatolian Fault System (NAFS) in the marine area of Gaziköy were examined. As a result of the processing and interpretation of the seismic sections, compression structures occurring due to the SW rotation of the NAFS in the study area, the morphology of the Ganos depression that formed as a result of faulting and also three different stratigraphic units were distinguished. These units are separated from each other by distinct unconformity surfaces and each unit presents different deformation structures. One of the most significant results obtained from the seismic data is that the unconformity surface that separates the current sediments of the seafloor from the older units is represented by the overlapping structures indicate sea level changes. It has been assessed that this situation occurred as a result of the erosional process developed during sea level fall.
https://doi.org/10.19111/bulletinofmre.784476
Keywords:
Gaziköy-Mürefte, Shallow marine deformation, Unconformity surface, North Anatolian Fault System, Sea of Marmara.
The internal structure of Beypazarı Blind Thrust Zone around Çayırhan
Authors:
Anıl ARDAHANLIOĞLU, Gürol SEYİTOĞLU, Korhan ESAT
ABSTRACT
The Beypazarı Blind Thrust Zone, which is surrounded by the North Anatolian, the Eskişehir, and the Kırıkkale-Erbaa fault zones, is a recently defined neotectonic structure developed in the NW central Anatolia together with the Eldivan-Elmadağ and the Abdüsselam Pinched Crustal Wedges. In this study, the internal structure of the Beypazarı Blind Thrust Zone has been examined in detail around Çayırhan region. It has been defined that it consists of the Karaköy, Sekli, Nalçabayırı, Uzunbayır blind thrusts, Davutoğlan Back Thrust, and Beypazarı Blind Thrust I-II from North to south, respectively with help of the fault-propagation folds in the study area. The existence of economically important and operational resources such as lignite and trona in the Neogene sequence affected by these faults in the region and earthquake generating potential of the faults determined in previous studies increase the importance of this study.
https://doi.org/10.19111/bulletinofmre.651712
Keywords:
Central Anatolia, Neotectonics, Blind thrust fault, Earthquake, Faultpropagation fold.
A laboratory-scale investigation on freezing-thawing behavior of some natural stone samples manifactured in Turkey
Authors:
Gökhan EROL, Ozan BAYRAM
ABSTRACT
In the study, the changes in the mechanical properties of the natural stone samples, which had been obtained from different regions of Turkey, before and after the freeze-thaw test were examined. Within the scope of the study, 17 different natural stone samples were used and, after chemical and mineralogical-petrographical properties were determined. Water absorption at atmospheric pressure, real density, porosity, and uniaxial compressive strength tests were performed before and after freezing-thawing. The freezing and thawing test has been performed using TS EN 12371 standard from -12 °C to +20 °C in 56 cycles (2 cycles = 24 hours). After the test, the samples were subjected to uniaxial compressive strength test in order to identify the changes of the compressive strength values. The results of the physical and mechanical tests on these samples were evaluated by grouping according to chemical and mineralogical-petrographical properties of natural stones. It was aimed to determine which natural stone samples are resistant to freeze-thaw, and can be used in external cladding applications according to the findings obtained from the study.
https://doi.org/10.19111/bulletinofmre.746486
Keywords:
Natural stone, Freezing and thawing, Water absorption, Thermalmechanical behavior, Uniaxial compressive strength.