Latest Pliocene-Quaternary uplift of the central Tauride and Evolutionary history of the Kızıllar Canyon, southern central Anatolia-Türkiye
Authors:
Ali KOÇYİĞİT, Uğur DOĞAN
ABSTRACT
The study area is located near the apex of the north-facing and V-shaped Konya-Niğde Graben. Its south-southeast margin is defined and controlled by the NE-trending Karaman-Niğde Fault Zone. It also forms the geographic boundary between the central Tauride in the south and central Anatolia in the north. This study aimed to determine the Latest Pliocene-Quaternary uplift rate of the central Tauride and the evolutionary history of the Kızıllar Canyon located on the uplifting southern footwall block of the Karaman Niğde Fault Zone. Both the geological and geomorphological field data, which were obtained within the framework of this study, revealed the following: (1) the Kızıllar River drainage system developed as a result of several capture events; (2) Lithological and hydrological characteristics of the valley reveal the reason for the lack of gradation in the river’s longitudinal profile; (3) the Kızıllar Canyon reflects the incision process of the Kızıllar River; (4) the Kızıllar River cut vertically into its bed up to 230 m, which corresponds to the minimum Latest Pliocene- Quaternary uplift rate of the central Tauride (~0.06 mm/yr); and (5) the Kızıllar Canyon developed as a natural response of the river to the uplift of the Konya-Niğde Fault Zone footwall block.
Keywords:
Kızıllar Canyon, Central Taurides, Central Anatolia, Fault, Uplift Rate
The Dodurga Fault is an active right-lateral strike-slip fault, approximately 63 km long, striking NW-SE in northwestern Anatolia. Based on 1:25,000-scale active fault mapping, the fault is subdivided into two principal geometric segments. Segment 1 is approximately 16 km long and extends from Sulhiye in the west to Erikli in the east, whereas Segment 2 is 47 km long and is characterized by a right-stepping geometry and a 10°-15° southeastern deflection. Geological and geomorphological observations, together with kinematic analyses, indicate that the fault is dominantly right-lateral strike-slip in character. Stream channels offset by up to several kilometers along the fault trace support its long-term activity, and fault-plane kinematic indicators independently confirm dextral motion. Paleostress analyses of the kinematic data indicate that the recent deformation phase along the Dodurga Fault is governed by approximately N-S contraction and E-W extension. Empirical scaling relationships suggest that Segment 1 and Segment 2 are capable of generating earthquakes of Mw 6.47 and Mw 6.97, respectively. If both segmentsrupture together, the Dodurga Fault could potentially generate an earthquake of Mw 7.16.
Modeling the discharge of Kapuzbaşı spring for parameterization of the karst aquifer, Aladağ Mountains, Central Taurus, Türkiye
Authors:
Süleyman Selim ÇALLI
ABSTRACT
Kapuzbaşı karst spring is located between Kayseri and Adana, one of the most important and wellstudied mountainous karst regions, Aladağlar, Central Taurus, Türkiye. Previous scientific studies revealed the hydrogeological setup, perceptual model including groundwater residence time and potential recharge-discharge relationship; however, there has not been any process-based conceptual
modeling experiment on the karst spring aiming to parameterize the karst system hydrodynamics. In the present study, we aimed to develop a numerical model of the karst groundwater system to parameterize the system hydrodynamics, which was built based on the conceptual understanding of the karst hydrogeology. We selected the lumped-conceptual hydrological model of KarstMod to quantify the discharge of the Kapuzbaşı spring. The modeling experiment showed that the recharge area of the karst spring is covering approximately 350 km2, and the approximate annual discharge exceeds 250 hm3. The preferential flow mechanism triggered after the water level in epikarst exceeding 92 mm, and the melt factor is approximated as 9.91 mm/°C/day. The response time of conduit reservoir is approximately 1 day, and the loss flux triggered when the water level in conduit reservoir exceeding 4 mm. The hydraulic conductivity of the matrix reservoir is found approx. 0.012 mm/day. The model performance based on the daily discharge was obtained as Nash Sutcliffe Efficiency (NSE) = 0.77, and Kling-Gupta Efficiency (KGE) = 0.87 in the calibration, and NSE = 0.76, and KGE = 0.77 for the validation periods, respectively. Eliminating the less sensitive model parameters in the calibration leads to more robust and less uncertain discharge simulations.
Keywords:
Kapuzbaşı Karst Spring, Aladağ Mountains, Hydrological Model, KarstMod, Central Taurus
Doğan PERİNÇEK, Nurdan ATAS, Seyma KARATUT, Esra ERENSOY
Indexed In · Volume 150 / 2015
GEOLOGICAL FACTORS CONTROLLING POTENTIAL OF LIGNITE BEDS WITHIN THE DANIŞMEN FORMATION IN THE THRACE BASIN
Authors:
Doğan PERİNÇEK, Nurdan ATAS, Seyma KARATUT, Esra ERENSOY
ABSTRACT
This project has been conducted for the General Directorate of Turkish Coal Enterprise. The aim of this study is to understand lignite potential of the basin. Subsurface data ( including numerous wells and several seismic lines) provided by TPAO, MTA and TKİ were used. Structure and thickness maps of Oligocene-Miocene-Pliocene units prepared for the basin. Purpose of this work is to understand economical values of lignite seam beds interbedding in the Danişmen Formation (Oligocene-Early Miocene). For this purpose, from bottom to top following maps were prepared: Structural map of the top Osmancık (Oligocene) Formation, thickness map of the Danişmen Formation, paleo-topographic map of unconformity surface which is at the top of the Danişmen Formation, total thickness map of Ergene-Kırcasalih formations (Late Miocene-Pliocene). Finally total thickness map of the lignite layers was prepared. It was the main purpose of the work. Lignite seam layers are located in middle of the Danişmen Formation. Also several stratigraphic correlations were conducted to understand lateral continuation of lignite layers. The first obstacle to reach lignite is thickness of the Ergene and Kırcasalih formations which overlie lignite bearing Danişmen Formation. Main structural event controlling the thickness variation of the Danişmen Formation is Thrace Fault System (Perinçek, 1991); it was active during Middle Miocene. Danişmen Formation extensively or partially was eroded along the fault zone and on the en-echelon folds of the fault system. Amount of erosion is variable and in some areas Danişmen Formation completely was eroded. As a result Ergene Formation lies directly on Osmancık Formation. Lignite layers are also eroded at these localities. Elevated areas related the Thrace Fault System partially was eroded; however these areas were still paleo-elevated areas during the accumulation of Ergene Formation. Onlapping sequence of Ergene Formation is thinner on these areas. At the end of this project, thicker lignite areas were delineated. Addition to this, thin overburden areas on lignite are located. Considering these result, new permit areas were selected.. In order to refine this work, a suggested facies map of Danişmen Formation is advise to be prepared.
ELEMENT ENRICHMENTS IN BITUMINOUS ROCKS, HATILDAĞ FIELD, GÖYNÜK/BOLU
Authors:
Ali SARI, Murad ÇİLSAL, Şükrü KOÇ
ABSTRACT
In this study, element enrichments in bituminous rocks (bituminous shale, bituminous claystone and bituminous marl) of the Kabalar Formation in the Hatıldağ field in Göynük town of the city of Bolu are investigated and their economic potential is discussed with regard to being a mineral deposit. Element analysis was conducted with ICP-ES (ICP emission spectrometry) and ICP-MS (ICP mass spectrometry) techniques. Organic carbon content in rocks was analyzed with Rock-Eval VI device. In pyrolysis analysis conducted on a total of 28 bituminous rocks that are collected from the Kayalık Dere measured stratigraphic section, Corg minimum and maximum are 0.40 %wt and 8.25 %wt, respectively (with average of 3,6 %wt). Major and trace elements analyzed were compared with those of Peru Continental Shelf Sediments, Namibia Continental Shelf Sediments, Gulf of California Sediments, Mediterranean Sapropels, Black Sea Sapropels, Cenomanian/Turonian (C/T) Demerara Rise Anoxic Sediments and C/T Gubbio Anoxic Sediments which are known to be deposited under anoxic conditions. In the studied samples, enrichment levels of major and trace element contents are determined with respect to average shale. Fe, Mg, Ca and K of the major elements and As, Ba, Co, Cu, Ni, Rb, Sr, V, Zn and Zr of trace elements were found to be more enriched with respect to basins compared. Higher concentrations of Ca, Mg and Ba elements in the studied samples indicate that depositional environment in Hatıldağ is more carbonaceous and suboxic.
In this study, the representative samples were taken from the halloysite deposits located in Çanakkale-Balıkesir regions in the northwestern Anatolia. At first, the dehydration temperatures of the samples were determined after the sample preparation and characterization studies. It was found that halloysite samples start to loose their interlayer waters at 50°C and goes up to 70°C. The intercalation studies were carried out on the dehydrated samples by using ethylene glycol, potassium acetate, dimethyl sulfoxide and formamide. Although the negative results by ethylene glycol and potassium acetate, the satisfactory results were obtained by dimethyl sulfoxide and formamide. It is undertood that the most effective reagent in terms of intercalation is formamide.