Volume 150 · 2015 · 10 ARTICLES
All Articles In This Issue
01
Indexed In · Volume 150 / 2015
THE GEOLOGY OF GÖKÇEADA (ÇANAKKALE)
Authors: ABSTRACTThe geology and especially the magmatic rocks of Gökçeada, which is the biggest island of Turkey and located at 20 km’s west of Biga Peninsula, constitute the subject of this study. Late Ediacaran/ Early Paleozoic aged Çamlıca metamorphics which crop out with a tectonic uplift in a narrow area in northwest of Gökçeada are the oldest rocks of the island. Early Eocene aged Karaağaç Formation which is formed by submarine fan deposits unconformably overlies Çamlıca metamorphics. As for the Dağiçitepe volcanic member which is formed by rhyolitic lavas, tuff and tuffites emplaced into Karaağaç Formation cutting Çamlıca metamorphics is the oldest volcanic unit of the study area. On Karaağaç Formation, Koyunbaba Formation has unconformably been deposited which consists of Middle Eocene shallow marine sediments. Then it has conformably been overlain by Soğucak Formation which consists of SE-NW extending reefal limestone. Middle-Upper Eocene aged Ceylan Formation which conformably overlies the Soğucak Formation and the early Oligocene aged Mezardere Formation which conformably overlies Ceylan Formation have been deposited due to turbiditic currents in deep marine environment. Late Eocene(?) – Oligocene aged subvolcanics which cut Mesozoic and Eocene units and emplaced into Eocene aged sedimentary units in the form of crypto dome and dome form the recent rigid topography of the study area and are the second magmatic phase called the “Gökçeada Domes”. Diorite-monzonites porphyry which crystallized in lower zones of subvolcanics on the other hand constitutes Mutludere intrusion. In eastern and southern parts of Gökçeada, Late Oligocene Gökçeada ignimbrites are located which are observed in the form of pumice flows on Mezardere Formation. These ignimbrites are then overlain by Early Miocene aged Kesmekaya volcanics which are formed by blocky ash flows. Middle Miocene aged Eşelek volcanics consisting of lava and pyroclastics with composition basaltic andesite and andesite are observed on a large area in east of Gökçeada. Upper Miocene aged Çanakkale Formation which is generally formed by the intercalation of poor consolidated conglomerate, sandstone, siltstone and marl crops out in narrow regions at east, southeast and south of Gökçeada. Quaternary alluvial deposits and debris composed of loose, unconsolidated sand, silt and other sediments unconformably overlie all previous units and complete the succession. Main tectonic structures of Gökçeada are formed by right lateral oblique faults which developed in Neo-tectonic period.
Anahtar
Keywords:
02
Indexed In · Volume 150 / 2015
BENTHIC FORAMINIFERAL BIOSTRATIGRAPHY OF MALATYA OLIGO-MIOCENE SUCCESSION (EASTERN TAURIDS, EASTERN TURKEY)
Authors: ABSTRACTThe benthic foraminiferal biostratigraphy of Oligo-Miocene aged Muratlı and Petekkaya formations which crop out over wide regions around Akçadağ town, west of Malatya province in Eastern Taurids were revealed in this study. Systematical sampling was carried out in measured stratigraphical sections in four locations in order to perform stratigraphical and paleontological investigations. Benthic foraminifera taken from 182 hard rock samples were defined and three biozones were determined as; SBZ 21-22, belonging to Oligocene (Rupelian - Early Chattian), SBZ 23 (Late Chattian) and SBZ 25 belonging to Lower Miocene in shallow marine deposits in the region. It was stated that the assemblage of planktic foraminifer and nannoplankton which stratigraphically detected within Chattian - Burdigalian units in the succession most probably indicated Aquitanian age. Besides; Oligo-Miocene transition in the region was approved with this study based on biostratigraphical locations of benthic foraminiferal taxa.
Keywords:
03
Indexed In · Volume 150 / 2015
THE SECRETS OF MASSIVE SULFIDE DEPOSITS ON MID-OCEAN RIDGES AND KÜRE-MAĞARADORUK COPPER DEPOSIT
Authors: ABSTRACTKüre region is located in western part of the Pontide tectonic belt. The oldest rocks around Küre are Paleozoic metamorphic rocks constituting “Rhodope-Pontide” continent. Liassic-pre Liassic ophiolites and basaltic volcanics, which form Paleotethys Ocean Floor are situated on “Rhodope-Pontide” continent as Paleotethys Ocean Floor residuals. Massive sulfide deposits in Küre Region are closely associated with pre Liassic – Liassic basaltic volcanics and intercalating black shale. These deposits are considered to have formed during hydrothermal mineralization processes when basaltic volcanism had stopped and defined as “Black Smoker” today. Massive sulfide bodies in Mağaradoruk copper deposits are lens shaped. Although ore lenses take place sometimes in basalts and black shales, they are generally located on basalts and are covered by black shales. In Küre region, fold structures are intensely observed, and Mağaradoruk deposit is located on western flank of an overturned anticline. Mağaradoruk deposit is formed by several small and a big ore body and by less developed, underlying stockwork disseminated ore. The big ore body is 600 m long, 250 m wide and nearly 40 m thick. As main ore minerals; pyrite and chalcopyrite are observed. In few amounts; marcasite, magnetite, hematite, sphalerite, covelline, neo-digenite, malachite, azurite, fahlers are seen. In fewer amounts; bravoite, lineiite (karolite), limonite, and in trace amounts; chromite, rutile anatase, chalcosine, cuprite, tenorite, pyrrhotite, valleriite, bornite, galenite, native copper and native gold are observed. Main gangue minerals are; quartz, siderite-ankerite calcite, dolomite and chlorite. Mağaradoruk massive sulfide deposit within basaltic rocks resembles to Siirt Madenköy, Ergani massive sulfide deposits, to “Cyprus” type massive sulfide deposits and modern Cyprus type massive sulfide deposits in terms of mineral contents; and to Ergani Mihrapdağı, Papuke, Pakotai and Parakoa deposits in terms of cover rocks, which are Cyprus type massive sulfide deposits, in New Zealand.
Keywords:
04
Indexed In · Volume 150 / 2015
OROGENIC GOLD PROSPECTIVITY MAPPING USING GEOSPATIAL DATA INTEGRATION, REGION OF SAQEZ, NW OF IRAN
Authors: ABSTRACTThe aim of this study is to map orogenic gold prospecting areas in the region of Saqez, NW of Iran. In order to achieve this task geological, geochemical and airborne geophysical data are analyzed and integrated using index overlay and fuzzy logic methods. Geological map of Saqez (1:100.000 scale) is used to assign lithological weights based on their favorability for hosting orogenic Au mineralization. Also a fault density map is produced and assigned based on the structural map which is included in the geological map. For preparing geochemical evidence maps, data from 535 stream sediment samples are examined using Number-Size multifractal method for Au, As, Bi and Hg. The detected thresholds are used to assign the catchment basins of the stream sediment samples. Aeromagnetic data is employed to detect the edges of magnetic anomalies based on an enhanced edge detection method. Extracted lineaments are then converted to a density map and assigned properly. Airborne radiometric data is also used to produce two evidence maps. Potassium count grid independently and K/Th ratio map are employed to distinguish locations with hydrothermal activity. Finally after integrating evidence maps, new locations with high potentials of Au mineralization are identified considering that the gold indications of the study area (Qolqoleh, Kervian and Ghabaghloujeh) are placed in the first priority of the fuzzy logic prospectivity map.
Keywords:
05
Indexed In · Volume 150 / 2015
GEOLOGICAL FACTORS CONTROLLING POTENTIAL OF LIGNITE BEDS WITHIN THE DANIŞMEN FORMATION IN THE THRACE BASIN
Authors: ABSTRACTThis project has been conducted for the General Directorate of Turkish Coal Enterprise. The aim of this study is to understand lignite potential of the basin. Subsurface data ( including numerous wells and several seismic lines) provided by TPAO, MTA and TKİ were used. Structure and thickness maps of Oligocene-Miocene-Pliocene units prepared for the basin. Purpose of this work is to understand economical values of lignite seam beds interbedding in the Danişmen Formation (Oligocene-Early Miocene). For this purpose, from bottom to top following maps were prepared: Structural map of the top Osmancık (Oligocene) Formation, thickness map of the Danişmen Formation, paleo-topographic map of unconformity surface which is at the top of the Danişmen Formation, total thickness map of Ergene-Kırcasalih formations (Late Miocene-Pliocene). Finally total thickness map of the lignite layers was prepared. It was the main purpose of the work. Lignite seam layers are located in middle of the Danişmen Formation. Also several stratigraphic correlations were conducted to understand lateral continuation of lignite layers. The first obstacle to reach lignite is thickness of the Ergene and Kırcasalih formations which overlie lignite bearing Danişmen Formation. Main structural event controlling the thickness variation of the Danişmen Formation is Thrace Fault System (Perinçek, 1991); it was active during Middle Miocene. Danişmen Formation extensively or partially was eroded along the fault zone and on the en-echelon folds of the fault system. Amount of erosion is variable and in some areas Danişmen Formation completely was eroded. As a result Ergene Formation lies directly on Osmancık Formation. Lignite layers are also eroded at these localities. Elevated areas related the Thrace Fault System partially was eroded; however these areas were still paleo-elevated areas during the accumulation of Ergene Formation. Onlapping sequence of Ergene Formation is thinner on these areas. At the end of this project, thicker lignite areas were delineated. Addition to this, thin overburden areas on lignite are located. Considering these result, new permit areas were selected.. In order to refine this work, a suggested facies map of Danişmen Formation is advise to be prepared.
Keywords:
06
Indexed In · Volume 150 / 2015
ELEMENT ENRICHMENTS IN BITUMINOUS ROCKS, HATILDAĞ FIELD, GÖYNÜK/BOLU
Authors: ABSTRACTIn this study, element enrichments in bituminous rocks (bituminous shale, bituminous claystone and bituminous marl) of the Kabalar Formation in the Hatıldağ field in Göynük town of the city of Bolu are investigated and their economic potential is discussed with regard to being a mineral deposit. Element analysis was conducted with ICP-ES (ICP emission spectrometry) and ICP-MS (ICP mass spectrometry) techniques. Organic carbon content in rocks was analyzed with Rock-Eval VI device. In pyrolysis analysis conducted on a total of 28 bituminous rocks that are collected from the Kayalık Dere measured stratigraphic section, Corg minimum and maximum are 0.40 %wt and 8.25 %wt, respectively (with average of 3,6 %wt). Major and trace elements analyzed were compared with those of Peru Continental Shelf Sediments, Namibia Continental Shelf Sediments, Gulf of California Sediments, Mediterranean Sapropels, Black Sea Sapropels, Cenomanian/Turonian (C/T) Demerara Rise Anoxic Sediments and C/T Gubbio Anoxic Sediments which are known to be deposited under anoxic conditions. In the studied samples, enrichment levels of major and trace element contents are determined with respect to average shale. Fe, Mg, Ca and K of the major elements and As, Ba, Co, Cu, Ni, Rb, Sr, V, Zn and Zr of trace elements were found to be more enriched with respect to basins compared. Higher concentrations of Ca, Mg and Ba elements in the studied samples indicate that depositional environment in Hatıldağ is more carbonaceous and suboxic.
Keywords:
07
Indexed In · Volume 150 / 2015
HALLOYSITE INTERCALATION OF NORTHWEST ANATOLIA
Authors: ABSTRACTIn this study, the representative samples were taken from the halloysite deposits located in Çanakkale-Balıkesir regions in the northwestern Anatolia. At first, the dehydration temperatures of the samples were determined after the sample preparation and characterization studies. It was found that halloysite samples start to loose their interlayer waters at 50°C and goes up to 70°C. The intercalation studies were carried out on the dehydrated samples by using ethylene glycol, potassium acetate, dimethyl sulfoxide and formamide. Although the negative results by ethylene glycol and potassium acetate, the satisfactory results were obtained by dimethyl sulfoxide and formamide. It is undertood that the most effective reagent in terms of intercalation is formamide.
Keywords:
08
Indexed In · Volume 150 / 2015
REFINEMENT OF THE REVERSE EXTRUSION TEST TO DETERMINE THE TWO CONSISTENCY LIMITS
Authors: ABSTRACTLiquid limit (LL) and plastic limit (PL) are the two most commonly used index properties of fine-grained soils. They have been used in not only classification of soils but also in correlation with certain engineering properties. Therefore, they have been subjected to numerous researches since they were first introduced by Atterberg in 1911. While their mechanisms were well defined in many codes and they have been in use for decades, criticisms often arose pertinent to the uncertainties inherent to them. Incredible amount of effort has been exerted to invent more rational testing methods in place of both the Casagrande’s cup and bead rolling methods. Part of those efforts has been on devicing a single tool to measure the two relative index properties together. Recently, the reverse extrusion test was brought into the use of geotechnical engineers. It was shown that this tool has a potential of measuring LL, PL, and even the shrinkage limit (SL). The aim of this investigation is to reassess the ability of the reverse extrusion test to determine LL and PL with further refinement. In this regard 70 finegrained soils covering a large range of plasticity were employed. Fall-cone method and rolling-device method were employed to determine LL and PL, respectively. The reverse extrusion tests were carried out at least five different water contents per soil sample. Extrusion pressures were plotted against water content and a curve fitting was applied to data pairs, from which the y-intercept (the coefficient a) and the slope (the coefficieent b) of the curve were determined. Those reverse extrusion coefficients were utilized to determine the representative extrusion pressures corresponding to LL and PL, as was done by the earlier researchers; however, the degree of success for the prediction of LL and PL using the representative extrusion pressures was not encouraging. Different from the previously proposed approaches, the reverse extrusion coefficients (i.e., a and b) were subjected to a multiple regression analysis along with the results of the conventional testing methods of fall-cone and rolling-device to determine the LL and PL as functions of the reverse extrusion parameters. It was shown that LL and PL can be predicted with a great degree of success using the reverse extrusion coefficients. While a great majority of the liquid limits found by using the fall-cone method were predicted with a ±10% error, almost all of the plastic limits found by the rolling device were predicted with a ±10% error. This refined investigation on the reverse extrusion test confirmed and proved that the reverse extrusion test is a simple, robust and inexpensive method capable of predicting both of two fundamental consistency limits using a single device.
Keywords:
09
Indexed In · Volume 150 / 2015
INVESTIGATION OF IRRIGATION WATER QUALITY OF SURFACE AND GROUNDWATER IN THE KÜTAHYA PLAIN, TURKEY
Authors: ABSTRACTThe Kütahya plain is one of the plains in Kütahya/Turkey, where drinking, agricultural and industrial water supplies are highly dependent on groundwater resources. The local population largely depends on water from alluvial shallow aquifer waters and some on the Felent and Porsuk rivers. Appraisal of surface and groundwater quality is extremely important to make sure the sustainable use of it for drinking, agricultural, and industrial purposes. The chemical quality of surface and groundwater of Kütahya plain has been studied in detail in order to have better understanding of potential water quality. A total of 21 groundwater samples and 6 surface water samples were collected in and around the plain. The relative abundance of major ions (meq/l) for most of the water samples were Ca2+ >Mg2+ >(Na++K+) for cations and HCO3- >SO42- >Cl- for anions. Five hydrochemical facies have been identified based on the major ion chemistry of the surface and groundwater of this area. However, based on hydrochemical facies, the type of water that predominates in the study area is Ca-Mg/Mg-Ca-HCO3 type in both December 2013 and June 2014. There is no significant change in the hydrochemical facies noticed during the two sampling periods. The chemical Index such as Sodium Absorption Ratio (SAR), Residual Sodium Carbonate (RSC), Sodium Percentage (%Na), Permeability Index (PI), Kelley Index (KI), Magnesium Ratio (MR), Potential Salinity (PS) and Total Hardness (TH) were calculated. The results indicated that SAR, RSC and KI values revealed 100%, %Na value revealed 92.6%, PI and PS values revealed 85.2% and MR value revealed 66.7% of water samples are within the safe limit suitable for irrigation. To sum up, the quality of surface and groundwater of Kütahya plain in general was suitable for irrigation.
Keywords:
10
Indexed In · Volume 150 / 2015
BRIEF NOTE ON NEOGENE VOLCANISM İN KEMALPAŞA–TORBALI BASIN (İZMİR)
Authors: ABSTRACT
No articles match your search.