Volume 158 · 2019 · 16 ARTICLES
All Articles In This Issue
01
Indexed In · Volume 158 / 2019
Tectonostratigraphic characteristics of the area between Çayeli (Rize) and İspir (Erzurum)
Authors: ABSTRACT
The study area is located in the Eastern Pontides between Rize, Çayeli, Arhavi, İspir and İkizdere. In this area, Maçka Tectonic Slice (MTS) and Taşköprü Tectonic Slice (TTS) are exposed. MTS is composed from old to young; Late Jurassic-Early Cretaceous limestone (Berdiga fm.); Turonian- Santonian conglomerate, sandstone, micritic limestone, siltstone, marl, basaltic, basaltic-andesitic lava, pyroclastites (Çatak fm.); Santonian rhyolitic, dacitic lava, pyroclastites, sandstone, clayey limestone (Kızılkaya fm.); late Santonian-Campanian basaltic, andesitic lava, pyroclastites, sandstone, clayey limestone (Caglayan fm.); Campanian-Mastrihtian rhyolitic, dacitic lava, pyroclastites, sandstone, clayey limestone (Çayırbağ fm.);late Maastrichtian-Danian sandstone, claystone, tuff, marl, clayey limestone (Cankurtaran fm.). Sedimentary, volcanosedimentary units in the Late Paleocene-Quaternary range (Erenler, Kaplıca, Melyat, Pazar, Hamidiye formations, and Handüzü, Çağırankaya volcanites) unconformably overlies the MTS. In the study area, Turonian- Maastrichtian basaltic andesitic lavaş, pyroclastites and sandstone, micritic limestone, claystone units (Yağmurdere fm.) belonging to TTS are observed, and Early-Middle Eocene sedimentary and volcanosedimentary units (Yedigöze, Çoruh formations) unconformably overlies the TTS. According to Ar/Ar dating, Çayırbağ formation was determined as 83.2±1.0 Ma, Melyat formation as 47.8±1.6 Ma, and Handüzü volcanics as 4.25±0.55 Ma for andesite level and as 3.93±0.46 Ma for dacite level. The MTS was intruded by Cretaceous-Paleocene Kaçkar granitoid I, Eocene Kaçkar granitoid II, Late Eocene Ardeşen gabbro, while the TTS was intruded by Cretaceous-Paleocene Kaçkar granitoid-I, Late Eocene Güllübağ monzonite.
https://doi.org/10.19111/bulletinofmre.465317
Keywords:
02
Indexed In · Volume 158 / 2019
Structural properties and tectonic signi ficance of a shear zone discovered within the Tauride orogen near Alanya, SW Turkey
Authors: ABSTRACT
A major shear zone, referred to as the Yeşilöz Shear Zone, was discovered in the lower Mahmutlar Nappe of the Alanya Nappe Complex in Alanya region. The nappe shows early transposed folds with axial metamorphic foliation and upright open folds formed during emplacement. The NW-trending shear zone is around 2 km wide and mappable over a length segment of 10 km. The shear zone consists of the metamorphic rocks of the host nappe, but with the phyllite mylonitized by vertical shear foliation and the quartzite and marble dispersed as lenticular bodies. These brittle rock bodies show broken upright folds similar as in the nappe, and also the phyllite shear lenses bear relics of the nappe metamorphic foliation. Analysis of kinematic indices in the shear zone points to a dextral transcurrent deformation. The emplacement of Mahmutlar Nappe caused mild metamorphism of the upper part of underlying nappe and also affected it with the development of the shear zone that extended downwards. The nappe underwent no further translational movement during and after the shear zone formation, which suggests that the ductile transcurrent deformation probably accommodated a residual shortening induced by the emplacement of the next, younger nappe of the Alanya Nappe Complex.
https://doi.org/10.19111/bulletinofmre.502054
Keywords:
03
Indexed In · Volume 158 / 2019
Selandian benthic foraminiferal assemblages of the southwestern Burdur (South of Lake Yarışlı, Western Turkey) and some taxonomic revisions
Authors: ABSTRACT
In this study, new genera and species are described. These three new genera are Neosistanites (type species Sistanites iranica), Parahaymanella (type species Parahaymanella hakyemezae) and Pseudohottingerina (type species Pseudohottingerina burdurensis). Neosistanites new species and new genus (N. sozerii, N. okuyucui, N. guvenci, N. dageri, N. catali, N. armagani, N. inali) and Neosistanites iranicus are defined. Parahaymanella is the new genus and its new species (P. hakyemezae, P. bozkurti and P. alanae). New species of new genus Pseudohottingerina (Ps. burdurensis and Ps. yarisliensis). Laffitteina anatoliensis, Laffitteina thraciaensis, Sirtina paleocenica, Ankaraella minima new species and Laffitteina erki, Laffitteina mengaudi, Ankaraella trochoidea species are defined and illustrated. Known Akbarina primitiva, Bolkarina aksarayi, Biloculinites cf. paleocenica, Miscellanea? globularis, Globoflarina? sphaeroidea species and Heterillina sp., Keramosphaera sp., Textularia sp., Chrysalidina? sp., Kolchidina? sp., Lockhartia? sp., Popovia? sp. and Thalmannita? sp., genera, illustrated only. Only photographs of undescribed benthic foraminifera genera (miliolid, miscellanid, planulinid, rotaliid, mississippinid, aglutine) are given. The definition of a new family (Neosistanitidae), the classification of the Neosistanites, the type species and species transfers between the genera, the emendation of the Ankaraella genus and the corrections of the Ankaraella trochoidea were made. Photographs of some fossil algae are given in plates. All material (SBZ 2) belongs to the Selandian.
https://doi.org/10.19111/bulletinofmre.494620
Keywords:
04
Indexed In · Volume 158 / 2019
A new species of Nummulites Lamarck (Nummulitidae, Foraminiferida) from Central Turkey
Authors: ABSTRACT
A new nummulitid species Nummulites sireli n. sp. is described from the middle Lutetian of the Çayraz section, North of Haymana, South of Ankara, Turkey. The new species is referred in to the N. distans group, of which six other species from the Haymana and Çiçekdağ regions of Central Anatolia are identifi ed.
https://doi.org/10.19111/bulletinofmre.413708
Keywords:
05
Indexed In · Volume 158 / 2019
Mineralogy, petrography and origin of hydrothermal alteration in Eocene magmatites in Central Anatolia (Sivas-Turkey)
Authors: ABSTRACT
Three different types of hydrothermal alterations have occurred in the Eocene magmatics of the northern part of Sivas-Turkey which include propylitic phyllic / sericitic and argillic. Hydrothermal alteration affected both Karataş volcanites and Kösedağ syenite. The clay formations are concentrated in two major zones; extending in NE-SW direction and intersecting both plutonic and volcanic rocks with circular opening cracks within the volcanics parallel to the plutonic-volcanic contact. Hypogene and supergene hydrothermal alteration products occurring on surface and/or near surface conditions represent the primary and secondary minerals that develop directly and mostly from feldspars with the mechanisms of neoformation and/or degradation. The hypogene minerals are formed in two stages of early (kaolinite, pyrophyllite, illite, I-S (illite-smectite), smectite, quartz and opal-CT) and late (barite, ore minerals, alunite, goyazite, jarosite, chlorite and C-S). Tourmaline, epidote and carbonates (calcite, dolomite, azurite and malachite) are considered as metasomatic and supergeneous minerals, respectively. The most common mineral paragenesis are kaolinite + quartz + goethite + goyazite or alunite, kaolinite + quartz + jarosite + feldspar ± goethite and/or goyazite in the argillic alteration zone, I-S + quartz + jarosite ± goethite ± feldspar as well as I-S + quartz + feldspar minerals in the sericitic alteration zone. Kaolinite (T) is mostly in the form of pseudohexagonal platies, I-S (R1, R3 as argillic alteration origins, 1Md, 2M1, 1M and R3 as sericitic alteration origins) forming fi ber-acicular bundles parallel to each other.
https://doi.org/10.19111/bulletinofmre.461255
Keywords:
06
Indexed In · Volume 158 / 2019
Geological, mineralogical and geochemical properties of the Dağbaşı skarn ores (Araklı-Trabzon, NE Turkey)
Authors: ABSTRACT
The Dağbaşı skarns have developed as an exoskarn type along the nearest border of Upper Cretaceous Dağbaşı Granitoid and block- and lens-shaped limestones of Berdiga Formation. The early garnets are predominantly grossular type (And0–0.81Grs59.69–78.65Prs21.35–38.11), while pyroxenes have a composition between diopside and hedenbergite (Hed24.44–31.81Diy67.3–76.99Joh0.52–0.88). The late garnets are characterized by high andradite (And74.67–100Grs0–22.8Prs0–4.51), and late pyroxenes by increasing johannsenite content (Hed22.17–62.63Diy0–36.2Joh31.86–76.69). High andradite content of late garnets is similar to Cu–Fe-type skarns, whereas the higher johannsenite and Mn/Fe ratios of pyroxenes are similar to Zn-type skarns. Higher andraditic garnets indicate an oxidized-type skarn and association with the shallow emplacement of intrusion. Increasing And/Grs ratios of garnets, from core to rim, also point out to increasing degree of oxidation. The retrograde skarn minerals are epidote, tremolite-actinolite, quartz, calcite, and chlorite. The ore minerals are composed of magnetite, hematite, pyrrhotite, pyrite, chalcopyrite, sphalerite, and galena. The Ag content of the galena (1.18-1.43wt%) suggests significant silver potential. Dağbaşı Granitoid shows high-K (2.38–3.75wt.% K2O), calc-alkaline, metaluminous–peraluminous transitional (A/CNK=0.88–1.23) and volcanic arc type granitoid. The various main and trace element contents of the granodiorite observed along the skarn zones show similarities with Fe–Cu–Zn type skarn-related granitoids, whereas there is no clear relation between the skarn type and composition of outher granitoids. Therefore, the presence of sulfur phases in addition to the oxide ore suggests that geochemical characteristics of granitoid had a large effect on the mineral composition.
https://doi.org/10.19111/bulletinofmre.457070
Keywords:
07
Indexed In · Volume 158 / 2019
Evaluation of soil geochemistry data of Canca Area (Gümüşhane, Turkey) by means of Inverse Distance Weighting (IDW) and Kriging methods-preliminary findings
Authors: ABSTRACT
The purpose of this study is to assess soil geochemical data of the Canca alteration area (Gümüşhane- Turkey) using statistical methods and investigate potential gold mineralizations of the area. With this purpose, 288 soil samples were collected and analyzed for gold and associated pathfinder elements. The concentrations ranged (Au and Hg: in μg/kg, others in mg/kg) between 0,68-19,20; 0,02-28,97; 2-314; 7-857; 2,1-394; 4-199,5; 0,59-49,29; 5-89; 0,04-37; 0,52-16,30; 1,25-91,9 for Au, Ag, Cu, Pb, Zn, As, Sb, Bi, Mo, Sn and Hg respectively. According to Sperman’s rho correlation coefficients, although not very strong, correlation was observed between Cu and Au; Zn and Cu; Sb and Pb and As; Mo and Pb and As and Sb; Sn and As; Sb and Mo. The threshold values of the elements were obtained by median+2 the median absolute deviation. The prediction maps of the elements were formed by using the Inverse Distance Weighting and Kriging methods. According to prediction maps; especially in the western part of the study area and also related to tectonic lines, elemental enrichments, (gold and silver) were determined. Therefore, it is suggested to give importance to the west of the area in exploration drilling, geophysics, etc. Since the element prediction maps produced by the Inverse Distance Weighting method has higher resolution in anomaly contrast, it is suggested that maps produced with this method can preferably be used to give an idea at first sight in soil geochemistry studies.
DOI: 10.19111/bulletinofmre.430531
Keywords:
08
Indexed In · Volume 158 / 2019
Geochemical characteristics of Sabalan volcanic rocks in Northwestern Iran
Authors: ABSTRACTSabalan is a voluminous stratovolcano situated in the northwestern part of Alborz-Azerbaijan zone, 25km from Meshkinshahr. It is separated by tectonic faults from Sarab plain and Meshkinshahr. The composition of Sabalan volcanic rocks ranges from andesite, trachyandesite to dacite. The rocks have hypocrystalline porphyritic texture with a glassy matrix and microlite . Plagioclase, amphibole, pyroxene, biotite, and oxides are the main phenocryst phase of the rocks. Some plagioclases show disequilibrium textures (sieve texture and oscillatory zoning). The sieve texture and oscillatory zoning in the plagioclases may be indicative of magma mixing processes in the genesis of the Sabalan volcanic rocks. Geochemical data reveal that the Sabalan lavas exhibit calk-alkaline major-oxide trends with a sodic character and they range in composition from andesite to dacite. Pre-caldera and post-caldera volcanic rocks have similar geochemical features with enrichments in LILE and LREE relative to HFSE and HREE, respectively, and have negative Ti, Nb, and Ta anomalies. Ba/Ta ratios higher than 450 and La/Nb ratios ranging between 2 and 3 indicate a volcanic arc setting for the studied rocks. Based on field and geochemical studies, Sabalan is a subduction-related volcano, occurred as a result of subduction of Neo-Tethyan oceanic crust beneath the Iranian microplate.
https://doi.org/10.19111/bulletinofmre.451565
Keywords:
09
Indexed In · Volume 158 / 2019
Porphyry copper prospectivity mapping using fuzzy and fractal modeling in Sonajeel area, NW Iran
Authors: ABSTRACTMain purpose of this research is to present a local scale GIS-based mineral prospectivity model for prospecting Cu porphyry mineralization, and to validate the produced model by field observation, surface sampling and drilling data. Sonajeel area which is the subject of this study is a part of Arasbaran mineralization belt, NW of Iran. Constructing a mathematical exploratory algorithm based on a mineralization type is a complicated and interdisciplinary task. For this purpose, results from processing and interpreting different data sets including geology, geochemistry and remote sensing were considered. A comprehensive exploratory integration model was built up considering the exploration stage and the descriptive porphyry mineralization model suggested by Sillitoe (2010). In order to prepare inputs for GIS-based exploration model, value assigned grids or evidence layers were produced using fuzzy membership curves and then integrated via gamma fuzzy function. In addition, for defuzzification and prioritizing the mineral prospectivity map, a Concentration- Area (C-A) fractal model was applied on the pixel values of the prospectivity map. Finally, the results were confirmed via field observation, surface sampling and drilling. Borehole logs at the first priority displayed a Cu mineralization zone with an average grade of 0.5%.
https://doi.org/10.19111/bulletinofmre.391835
Keywords:
10
Indexed In · Volume 158 / 2019
Factors controlling the paleo-sedimentary conditions of Çeltek oil shale, Sorgun-Yozgat/Turkey
Authors: ABSTRACT
The study field covering an area of about 1000 km2 is located in Sorgun town of the city of Yozgat. In the region Paleozoic, Campanian-Maastrichtian, Eocene, Miocene and Quaternary units are exposed. Among these units, the lower Eocene Çeltek formation hosts coal beds and oil shale. The Eocene epoch is important for organic matter deposition regarding oil and gas productivity and anoxic depositional conditions. In order to examine the paleo-sedimentary conditions of oil shales in the study area and their relation to Total Organic Carbon (TOC) contents and major-trace element contents, a total of 29 samples were collected from two boreholes and one Measured Stratigraphic Section (MSS). Samples have TOC contents varying from 1.97 to 16.17 wt% (average 6.30 wt%). The V/Cr, V/(V+Ni), U/Th, δU and Authigenic Uranium (AU) values of the Çeltek formation oil shales (ÇFOS) reveal that the oil shales have been deposited under variable paleo-environmental conditions. For paleo-salinity the Sr/Ba ratios indicate mostly deposition in a freshwater environment. Chemical Alteration Index (CIA) values and Sr/ Cu ratios indicate that paleo-climate conditions of ÇFOS were dry, hot and occasionally humid. The Fe/ Ti and (Fe+Mn)/Ti ratios reveal hydrothermal activity during sedimentation of oil shales. Zr/Rb ratios of samples are indicative of very weak paleo-hydrodynamics during the deposition of oil shales. Such variable geochemical conditions in the basin resulted in variable paleo-environmental conditions.
https://doi.org/10.19111/bulletinofmre.494703
Keywords:
11
Indexed In · Volume 158 / 2019
Investigation of feldspar raw material potential of alkali feldspar granites and alkali feldspar syenites within Central Anatolia
Authors: ABSTRACT
Alkali feldspar granites are intrusive rocks and mainly composed of alkali feldspar, quartz and plagioclase. They represent one of the major sources that provide raw materials for glass and ceramics industry because of their high feldspar and quartz contents. In addition to alkali feldspar granites, also alkali feldspar syenites have potential to become raw material source due to their high feldspar and feldspathoid contents. These rocks are exposed in large areas within Central Anatolia. For this reason, alkali feldspar granites within Ağaçören Intrusive Suite (AIS) (Kalebalta, Yıldırımlı, Çerkezuşağı, Çatalçeşme, İbrahimbeyli, Deliler, Ekecik, Sipahiler, Camili, Yaylak, Namlıkışla), Hacılı Suite (Sarıhacılı), Cefalık, Behrekdağ, Terlemez and alkali feldspar syenites within Bayındır, Hamit and İdişdağı Suites are investigated. This study aims at investigating possible potential of alkali feldspar (orthoclase, microcline), plagioclase (albite, oligoclase) and quartz minerals within these rocks in glass and ceramic industry as raw materials. Additionally, studied samples are compared with different granites around the world. Alkaline element and iron contents of the studied rocks have high and relatively high Fe2O3 values compared to granites around the world. Fe2O3 values of the samples depend on mafic minerals and independent Fe minerals such as magnetite within the rocks. According to electron microprobe analysis (EPMA), feldspars are mainly composed of SiO2, Al2O3, Na2O and K2O. The Central Anatolian feldspars have high K2O (over %14) and low FeO (less than % 0.05), thus they have high feldspar raw material potential in ceramic industry. Although alkali feldspar granites within AIS have promising potential to be used as feldspar raw material, they have low reserve due to their occurrence as dykes. On the other hand, Hacılı, Cefalık, Behrekdağ, Terlemez, Bayındır, Hamit and İdişdağı Suites have both good quality and high reserve for feldspar potential.
https://doi.org/10.19111/bulletinofmre.438197
Keywords:
12
Indexed In · Volume 158 / 2019
The role of enhanced oil recovery in the upstream petroleum sector, a case study from Turkey
Authors: ABSTRACT
The upstream petroleum sector issues still keep its popularity worldwide. Enhanced Oil Recovery (EOR) is an essential unconventional method of improving production in the petroleum sector. The EOR is gaining more importance in the sector. 2% of the global crude oil production is performed by EOR operations currently. The crude oil production of Turkey which is now in a decreasing trend is performed from old and mature oil fields. Sharp declines are expected for the oil production in the near future if new discoveries do not take place or enhanced oil production techniques are not performed. The average recovery rate for the crude oil fields in Turkey is about at 20%. An increase in this ratio can provide significant amount of crude oil to Turkish production. The ratio of crude oil production by EOR methods is about 15% currently in Turkey. In this study, the historical background of EOR projects is explained and potential EOR methods have been discussed for Turkish crude oil fields. The aim of the research is to evaluate the crude oil production potential from existing oil fields of Turkey based on EOR methods matching with the characteristics of oil fields with statistical information on world EOR outlook.
https://doi.org/10.19111/bulletinofmre.444903
Keywords:
13
Indexed In · Volume 158 / 2019
The prediction of the expandability of clays using a ternary diagram
Authors: ABSTRACTThe aim of this study is to put forward a prediction scheme for the expandability of clays by use of inexpensive and rapid chemical analysis. Seventy clay ores from fourteen locations throughout central and west Turkey were characterized mineralogically, chemically, and for expansion testing. Using the ternary plotting scheme of SiO2-Al2O3-fl uxing samples exceeding 50% expansion plotted within and slightly beyond the region proposed by Riley (1951). This study newly extends the region in ternary space for samples suitable for expansion and use in light weight aggregate. Non-expanding samples are associated with mineral assemblages dominated by quartz. In this study, it was determined that the samples without the expandability property were lacking the required chemical aspect of SiO2- Al2O3-fl uxing ratios, mineralogical clay structures, proportions and gas agents. In addition, the effect of having a too low or high position on the triangle diagram was found to have a negative impact on the expandability. When mineralogical analyses, mineral associations, chemical compositions and expandability results were evaluated together, it was observed that Mica GM-Chloride GM; Montmorillonite-Zeolite-Amorphous matter and Clay GM-Amorh Silica-Cristobalite are the samples showing expandability properties for the extent of this study. Also, it was noted that almost all samples with graphite content did expand. The extension of the suitability fi eld on the ternary diagram for prediction of expansion properties, combined with low cost and rapid chemical analysis demonstrate benefi ts for the clay production industry in Turkey, particularly for saving energy and fi nancial resources needed during exploration and early stages of production clay ores.
https://doi.org/10.19111/bulletinofmre.417966
Keywords:
14
Indexed In · Volume 158 / 2019
Hydro-chemical and isotopic investigation of the İspendere mineral and thermal water springs, Malatya, Turkey
Authors: ABSTRACT
The objective of this study is to determine the source, chemical characteristics and isotopic components of the İspendere mineral and thermal waters, Malatya, Turkey. There are many mineral and thermal water springs in the area with flow rates ranging between 0.01 – 0.4 l/s. Geochemical and isotope chemistry studies were carried out at three different thermal springs in the region as well as three different cold water springs during May-October 2011. The temperature of mineral and thermal waters were measured as between 21.1°C – 23.6°C in May 2011 and as 20.8°C in October 2011. The region was determined as a low temperature geothermal area and the reason for this is thought to be cold water mixing. The pH values of mineral and thermal spring waters were measured to be between 6.19 –6.69, EC values were measured to be between 1420 μS/cm and 2720 μS/cm, pH values of shallow and deep wells ranged between 6.04 and 7.82, whereas EC values were measured approximately between 275 μS/cm and 3300 μS/cm. The MgHCO3 water type dominates the chemistry of mineral and thermal water in study area. The results of 18O and 2H isotope analysis yield that the springs of mineral and thermal waters as well as cold waters are fed by meteoric rains. It was determined that the İspendere mineral and thermal waters have low tritium (³H), low Cl and high EC values. Reservoir rock temperatures have been estimated to be between 95 -132°C as a result of the quartz geo-thermometer calculations.
https://doi.org/10.19111/bulletinofmre.494681
Keywords:
15
Indexed In · Volume 158 / 2019
The use of electromagnetic and vertical electrical sounding methods in groundwater exploration
Authors: ABSTRACTElectromagnetic (EM) profiling and Vertical Electrical Sounding (VES) studies were carried out for groundwater exploration in the Twifo – Hemang Lower Denkyira Districts of Ghana. These two geophysical methods were used for exploring the groundwater potentials beneath Achiase, Mbaa Mpe Hia Community and Moseaso Community. This paper seeks to encourage the use of inversion for interpreting electromagnetic data rather than the usual qualitative interpretation method using line graphs and also the use of apparent resistivity maps as 2D pseudo resistivity maps to support interpretations of the 1D inversion results (in cases where the available budget could not permit 2D and or 3D inversion). These would help in enhancement of obtained results, reduce ambiguity and help decision making. The EM results revealed that; the three communities are underlain by two layers with the first layer having the thickness range between 2 to 10 m and the second layer is a half space. The results from VES studies indicate that; Achiase Community and Mbaa Mpe Hia No. 2 community are underlain by three geoelectrical layers and Moseaso Community is underlain by four geoelectrical layers. On the basis of this study the Moseaso Community is ranked highest in terms of groundwater potential followed by the Achiase community and finally the Mbaa Mpe Hia No.2 Community. Several sites were recommended for drilling boreholes for water supply in these communities.
https://doi.org/10.19111/bulletinofmre.451557
Keywords:
16
Indexed In · Volume 158 / 2019
An approach to obtain the structural information from the electrical resistivity well logging curves
Authors: ABSTRACTIn well logging measurements, the effect of the fluid in the well on the resistivity log curves and the investigation depth/distance for 16 and 64 inches logs were investigated in two-dimensional numerical modeling with the assumption that underground structures are symmetrical. Structural information was obtained via recovering the real resistivity values by using the inversion rather than empirical approaches. Generally, in the case of using the conductive fluid (1 ohm.m
Keywords:
No articles match your search.