Sabalan is a voluminous stratovolcano situated in the northwestern part of Alborz-Azerbaijan zone, 25km from Meshkinshahr. It is separated by tectonic faults from Sarab plain and Meshkinshahr. The composition of Sabalan volcanic rocks ranges from andesite, trachyandesite to dacite. The rocks have hypocrystalline porphyritic texture with a glassy matrix and microlite . Plagioclase, amphibole, pyroxene, biotite, and oxides are the main phenocryst phase of the rocks. Some plagioclases show disequilibrium textures (sieve texture and oscillatory zoning). The sieve texture and oscillatory zoning in the plagioclases may be indicative of magma mixing processes in the genesis of the Sabalan volcanic rocks. Geochemical data reveal that the Sabalan lavas exhibit calk-alkaline major-oxide trends with a sodic character and they range in composition from andesite to dacite. Pre-caldera and post-caldera volcanic rocks have similar geochemical features with enrichments in LILE and LREE relative to HFSE and HREE, respectively, and have negative Ti, Nb, and Ta anomalies. Ba/Ta ratios higher than 450 and La/Nb ratios ranging between 2 and 3 indicate a volcanic arc setting for the studied rocks. Based on field and geochemical studies, Sabalan is a subduction-related volcano, occurred as a result of subduction of Neo-Tethyan oceanic crust beneath the Iranian microplate.
Mustafa Kemal REVAN, Deniz GÖÇ, Mustafa ÖZKAN, Cüneyt ŞEN, Rasim Taylan KARA, Mustafa TOKOĞLU, Semi HAMZAÇEBİ, Rıfat Cihan SEVİM, Fatih SEZEN, Celaleddin BAYRAKTAR, Ömer AKGÜL
Indexed In · Volume 169 / 2022
Geology, fluid inclusion characteristics and mineral resource estimation of the Güzelyayla porphyry Cu-Mo mineralization (NE Türkiye)
Authors:
Mustafa Kemal REVAN, Deniz GÖÇ, Mustafa ÖZKAN, Cüneyt ŞEN, Rasim Taylan KARA, Mustafa TOKOĞLU, Semi HAMZAÇEBİ, Rıfat Cihan SEVİM, Fatih SEZEN, Celaleddin BAYRAKTAR, Ömer AKGÜL
ABSTRACT
Magmatic processes that emerged with the evolution of the Neotethys ocean and associated lithospheric plates caused the formation of significant mineralization in the Tethys belt. The Eastern Pontides, which are located in the northeast of Turkey and are a part of the Tethys metallogenic belt,
are particularly rich in porphyry-type mineralization and represent an important region for Cu-Mo exploration. A large number of Cu, Pb and Zn anomalies have been determined in a large region including the Güzelyayla Cu-Mo field by stream sediment sampling. The Güzelyayla occurrence
is Cu-Mo mineralization associated with andesitic/basaltic volcanic rocks and intrusive dacites crosscutting these rocks. The Güzelyayla Cu-Mo mineralization developed in the stockwork and fault-controlled silicified zones. Homogenization temperature values vary between 324 °C and 420 °C (average 374 °C). Salinity values range between 2.2 and 18.6% NaCl (average 9.1% NaCl). A concentric alteration zoning surrounding the potassic alteration indicates a gradual change in the physicochemical properties of the solutions forming the mineralization. The Güzelyayla mineralization was formed in the Eocene (50.7 ± 1.0 million years) period in the Upper Cretaceous volcanic rocks in relation to post-collisional processes in the magmatic arc environment. Contrary to previous studies, estimation zone models were created and an estimated 54.2 million tons of extracted/potential mineral resource with an average grade of 0.20% Cu and 0.014% Mo (0.26% Cu equivalent grade) was made in the Güzelyayla field.
https://doi.org/10.19111/bulletinofmre.1074485
ICP-OES and LA-ICP-MS instruments routinely used to assess the geochemical properties of the various natural and synthetic materials. In this contribution, the analytical routines and method development procedures of the ICP-OES and LA-ICP-MS facilities installed at the İstanbul University-Cerrahpaşa Geological Engineering Department, Geochronology and Geochemistry Laboratory have been evaluated using well-known international rock standards. Sample preparation techniques, method development, experimental setup and measurement conditions for the both ICP-OES and LA-ICP-MS instruments were discussed and specific analyze results of NIST SRM 614, BCR-2, AGV-2, BCR-2G and AGV-2G were evaluated. Flux-free USGS glass standards were produced by in-house techniques and flux-bearing glasses were produced by fusion of sample with the mixture of ultra-pure lithium-tetraborate, lithium metaborate and lithiumbromide were evaluated and compared with the well-known reference values in the literature. Relative standard deviation (RSD) values for the major oxide measurements for standards changes between of 0.0 wt. % to 1.5 wt. %. RSD values for the trace and rare-earth-elements values were mainly lower than 10 wt. %. The results confirm that the both flux-bearing and flux-free glasses reasonably match with the world-wide inter-laboratory values for international standards samples. The combination of these two instruments can be used to conduct geochemistry of various solid earth materials.
Engin MERİÇ, M. Baki YOKEŞ, İpek F. BARUT, Atike NAZİK, Mustafa ERYILMAZ, Fulya YÜCESOY ERYILMAZ, M. Fatih HÜSEYİNOĞLU, Mustafa KUMRAL, Erol SARI
Indexed In · Volume 166 / 2021
Alien foraminifers of the northern and northeastern coastlines of Cyprus Island
Authors:
Engin MERİÇ, M. Baki YOKEŞ, İpek F. BARUT, Atike NAZİK, Mustafa ERYILMAZ, Fulya YÜCESOY ERYILMAZ, M. Fatih HÜSEYİNOĞLU, Mustafa KUMRAL, Erol SARI
ABSTRACT
The study area covers the northern coasts of Cyprus from the Güzelyurt Gulf to the Gazimağusa Gulf. This study was carried out in order to reveal the presence of the alien foraminifera, which are widely distributed in the Eastern Mediterranean particularly Amphistegina lobifera in the study area, and the effects of trace elements on faunal assemblages (foraminifera, ostracod and mollusc). The bottom sediment samples were taken from eighteen different points and depths, the faunal assemblages were examined, and the sediment distribution map of the studied area was made by ICP-MS analysis and geochemical evaluations. 30 genera and 48 species of foraminifera have been identified, of which 9 species belonging to 6 genera are the alien foraminifera. These are: Spiroloculina angulosa, S. antillarum, Hauerina diversa, Coscinospira hemprichii, Peneroplis pertusus, P. planatus, Amphisorus hemprichii, Sorites orbiculus and Amphistegina lobifera. Amphistegina lobifera was observed to be abnormally abundant in most of the samples. This foraminiferal assemblage of Red Sea origin constitutes a poor assemblage compared to the alien assemblages in Turkish Mediterranean coastal areas. It has been determined that the ostracod and mollusc genera and species found in the same samples belong to the typical Mediterranean and Aegean Sea community.
https://doi.org/10.19111/bulletinofmre.838609
Mineralogy, petrography and origin of hydrothermal alteration in Eocene magmatites in Central Anatolia (Sivas-Turkey)
Authors:
Zeynel BAŞIBÜYÜK, Hüseyin YALÇIN
ABSTRACT
Three different types of hydrothermal alterations have occurred in the Eocene magmatics of the northern part of Sivas-Turkey which include propylitic phyllic / sericitic and argillic. Hydrothermal alteration affected both Karataş volcanites and Kösedağ syenite. The clay formations are concentrated in two major zones; extending in NE-SW direction and intersecting both plutonic and volcanic rocks with circular opening cracks within the volcanics parallel to the plutonic-volcanic contact. Hypogene and supergene hydrothermal alteration products occurring on surface and/or near surface conditions represent the primary and secondary minerals that develop directly and mostly from feldspars with the mechanisms of neoformation and/or degradation. The hypogene minerals are formed in two stages of early (kaolinite, pyrophyllite, illite, I-S (illite-smectite), smectite, quartz and opal-CT) and late (barite, ore minerals, alunite, goyazite, jarosite, chlorite and C-S). Tourmaline, epidote and carbonates (calcite, dolomite, azurite and malachite) are considered as metasomatic and supergeneous minerals, respectively. The most common mineral paragenesis are kaolinite + quartz + goethite + goyazite or alunite, kaolinite + quartz + jarosite + feldspar ± goethite and/or goyazite in the argillic alteration zone, I-S + quartz + jarosite ± goethite ± feldspar as well as I-S + quartz + feldspar minerals in the sericitic alteration zone. Kaolinite (T) is mostly in the form of pseudohexagonal platies, I-S (R1, R3 as argillic alteration origins, 1Md, 2M1, 1M and R3 as sericitic alteration origins) forming fi ber-acicular bundles parallel to each other.
https://doi.org/10.19111/bulletinofmre.461255
Keywords:
plutonic, volcanic, XRD, SEM, Alteration zone and type
Evaluation of soil geochemistry data of Canca Area (Gümüşhane, Turkey) by means of Inverse Distance Weighting (IDW) and Kriging methods-preliminary findings
Authors:
Alaaddin VURAL
ABSTRACT
The purpose of this study is to assess soil geochemical data of the Canca alteration area (Gümüşhane- Turkey) using statistical methods and investigate potential gold mineralizations of the area. With this purpose, 288 soil samples were collected and analyzed for gold and associated pathfinder elements. The concentrations ranged (Au and Hg: in μg/kg, others in mg/kg) between 0,68-19,20; 0,02-28,97; 2-314; 7-857; 2,1-394; 4-199,5; 0,59-49,29; 5-89; 0,04-37; 0,52-16,30; 1,25-91,9 for Au, Ag, Cu, Pb, Zn, As, Sb, Bi, Mo, Sn and Hg respectively. According to Sperman’s rho correlation coefficients, although not very strong, correlation was observed between Cu and Au; Zn and Cu; Sb and Pb and As; Mo and Pb and As and Sb; Sn and As; Sb and Mo. The threshold values of the elements were obtained by median+2 the median absolute deviation. The prediction maps of the elements were formed by using the Inverse Distance Weighting and Kriging methods. According to prediction maps; especially in the western part of the study area and also related to tectonic lines, elemental enrichments, (gold and silver) were determined. Therefore, it is suggested to give importance to the west of the area in exploration drilling, geophysics, etc. Since the element prediction maps produced by the Inverse Distance Weighting method has higher resolution in anomaly contrast, it is suggested that maps produced with this method can preferably be used to give an idea at first sight in soil geochemistry studies.
DOI: 10.19111/bulletinofmre.430531
Factors controlling the paleo-sedimentary conditions of Çeltek oil shale, Sorgun-Yozgat/Turkey
Authors:
Berna YAVUZ PEHLIVANLI
ABSTRACT
The study field covering an area of about 1000 km2 is located in Sorgun town of the city of Yozgat. In the region Paleozoic, Campanian-Maastrichtian, Eocene, Miocene and Quaternary units are exposed. Among these units, the lower Eocene Çeltek formation hosts coal beds and oil shale. The Eocene epoch is important for organic matter deposition regarding oil and gas productivity and anoxic depositional conditions. In order to examine the paleo-sedimentary conditions of oil shales in the study area and their relation to Total Organic Carbon (TOC) contents and major-trace element contents, a total of 29 samples were collected from two boreholes and one Measured Stratigraphic Section (MSS). Samples have TOC contents varying from 1.97 to 16.17 wt% (average 6.30 wt%). The V/Cr, V/(V+Ni), U/Th, δU and Authigenic Uranium (AU) values of the Çeltek formation oil shales (ÇFOS) reveal that the oil shales have been deposited under variable paleo-environmental conditions. For paleo-salinity the Sr/Ba ratios indicate mostly deposition in a freshwater environment. Chemical Alteration Index (CIA) values and Sr/ Cu ratios indicate that paleo-climate conditions of ÇFOS were dry, hot and occasionally humid. The Fe/ Ti and (Fe+Mn)/Ti ratios reveal hydrothermal activity during sedimentation of oil shales. Zr/Rb ratios of samples are indicative of very weak paleo-hydrodynamics during the deposition of oil shales. Such variable geochemical conditions in the basin resulted in variable paleo-environmental conditions.
https://doi.org/10.19111/bulletinofmre.494703
Keywords:
Paleo-environment, paleo- salinity, paleo-climate, chemical alteration index (CIA), Çeltek formation oil shales (ÇFOS), total organic carbon (TOC),