Environmental isotopes, İspendere, mineral and thermal waters, geochemistry,
Abstract:
Theobjective of this study is to determine the source, chemical characteristics and isotopic components of the İspendere mineral and thermal waters, Malatya, Turkey. There are many mineral and thermal water springs in the area with flow rates ranging between 0.01 – 0.4 l/s. Geochemical and isotope chemistry studies were carried out at three different thermal springs in the region as well as three different cold water springs during May-October 2011. The temperature of mineral and thermal waters were measured as between 21.1°C – 23.6°C in May 2011 and as 20.8°C in October 2011. The region was determined as a low temperature geothermal area and the reason for this is thought to be cold water mixing. The pH values of mineral and thermal spring waters were measured to be between 6.19 –6.69, EC values were measured to be between 1420 μS/cm and 2720 μS/cm, pH values of shallow and deep wells ranged between 6.04 and 7.82, whereas EC values were measured approximately between 275 μS/cm and 3300 μS/cm. The MgHCO3 water type dominatesthe chemistry of mineral and thermal water in study area. The results of 18O and 2H isotope analysis yield that the springs of mineral and thermal waters as well as cold waters are fed by meteoric rains. It was determined that the İspendere mineral and thermal waters have low tritium (³H), low Cl and high EC values. Reservoir rock temperatures have been estimated to be between 95 -132°C as a result of the quartz geo-thermometer calculations.
Mustafa Kemal REVAN, Deniz GÖÇ, Mustafa ÖZKAN, Cüneyt ŞEN, Rasim Taylan KARA, Mustafa TOKOĞLU, Semi HAMZAÇEBİ, Rıfat Cihan SEVİM, Fatih SEZEN, Celaleddin BAYRAKTAR, Ömer AKGÜL
Indexed In · Volume 169 / 2022
Geology, fluid inclusion characteristics and mineral resource estimation of the Güzelyayla porphyry Cu-Mo mineralization (NE Türkiye)
Authors:
Mustafa Kemal REVAN, Deniz GÖÇ, Mustafa ÖZKAN, Cüneyt ŞEN, Rasim Taylan KARA, Mustafa TOKOĞLU, Semi HAMZAÇEBİ, Rıfat Cihan SEVİM, Fatih SEZEN, Celaleddin BAYRAKTAR, Ömer AKGÜL
ABSTRACT
Magmatic processes that emerged with the evolution of the Neotethys ocean and associated lithospheric plates caused the formation of significant mineralization in the Tethys belt. The Eastern Pontides, which are located in the northeast of Turkey and are a part of the Tethys metallogenic belt,
are particularly rich in porphyry-type mineralization and represent an important region for Cu-Mo exploration. A large number of Cu, Pb and Zn anomalies have been determined in a large region including the Güzelyayla Cu-Mo field by stream sediment sampling. The Güzelyayla occurrence
is Cu-Mo mineralization associated with andesitic/basaltic volcanic rocks and intrusive dacites crosscutting these rocks. The Güzelyayla Cu-Mo mineralization developed in the stockwork and fault-controlled silicified zones. Homogenization temperature values vary between 324 °C and 420 °C (average 374 °C). Salinity values range between 2.2 and 18.6% NaCl (average 9.1% NaCl). A concentric alteration zoning surrounding the potassic alteration indicates a gradual change in the physicochemical properties of the solutions forming the mineralization. The Güzelyayla mineralization was formed in the Eocene (50.7 ± 1.0 million years) period in the Upper Cretaceous volcanic rocks in relation to post-collisional processes in the magmatic arc environment. Contrary to previous studies, estimation zone models were created and an estimated 54.2 million tons of extracted/potential mineral resource with an average grade of 0.20% Cu and 0.014% Mo (0.26% Cu equivalent grade) was made in the Güzelyayla field.
https://doi.org/10.19111/bulletinofmre.1074485
ICP-OES and LA-ICP-MS instruments routinely used to assess the geochemical properties of the various natural and synthetic materials. In this contribution, the analytical routines and method development procedures of the ICP-OES and LA-ICP-MS facilities installed at the İstanbul University-Cerrahpaşa Geological Engineering Department, Geochronology and Geochemistry Laboratory have been evaluated using well-known international rock standards. Sample preparation techniques, method development, experimental setup and measurement conditions for the both ICP-OES and LA-ICP-MS instruments were discussed and specific analyze results of NIST SRM 614, BCR-2, AGV-2, BCR-2G and AGV-2G were evaluated. Flux-free USGS glass standards were produced by in-house techniques and flux-bearing glasses were produced by fusion of sample with the mixture of ultra-pure lithium-tetraborate, lithium metaborate and lithiumbromide were evaluated and compared with the well-known reference values in the literature. Relative standard deviation (RSD) values for the major oxide measurements for standards changes between of 0.0 wt. % to 1.5 wt. %. RSD values for the trace and rare-earth-elements values were mainly lower than 10 wt. %. The results confirm that the both flux-bearing and flux-free glasses reasonably match with the world-wide inter-laboratory values for international standards samples. The combination of these two instruments can be used to conduct geochemistry of various solid earth materials.
Engin MERİÇ, M. Baki YOKEŞ, İpek F. BARUT, Atike NAZİK, Mustafa ERYILMAZ, Fulya YÜCESOY ERYILMAZ, M. Fatih HÜSEYİNOĞLU, Mustafa KUMRAL, Erol SARI
Indexed In · Volume 166 / 2021
Alien foraminifers of the northern and northeastern coastlines of Cyprus Island
Authors:
Engin MERİÇ, M. Baki YOKEŞ, İpek F. BARUT, Atike NAZİK, Mustafa ERYILMAZ, Fulya YÜCESOY ERYILMAZ, M. Fatih HÜSEYİNOĞLU, Mustafa KUMRAL, Erol SARI
ABSTRACT
The study area covers the northern coasts of Cyprus from the Güzelyurt Gulf to the Gazimağusa Gulf. This study was carried out in order to reveal the presence of the alien foraminifera, which are widely distributed in the Eastern Mediterranean particularly Amphistegina lobifera in the study area, and the effects of trace elements on faunal assemblages (foraminifera, ostracod and mollusc). The bottom sediment samples were taken from eighteen different points and depths, the faunal assemblages were examined, and the sediment distribution map of the studied area was made by ICP-MS analysis and geochemical evaluations. 30 genera and 48 species of foraminifera have been identified, of which 9 species belonging to 6 genera are the alien foraminifera. These are: Spiroloculina angulosa, S. antillarum, Hauerina diversa, Coscinospira hemprichii, Peneroplis pertusus, P. planatus, Amphisorus hemprichii, Sorites orbiculus and Amphistegina lobifera. Amphistegina lobifera was observed to be abnormally abundant in most of the samples. This foraminiferal assemblage of Red Sea origin constitutes a poor assemblage compared to the alien assemblages in Turkish Mediterranean coastal areas. It has been determined that the ostracod and mollusc genera and species found in the same samples belong to the typical Mediterranean and Aegean Sea community.
https://doi.org/10.19111/bulletinofmre.838609
The use of electromagnetic and vertical electrical sounding methods in groundwater exploration
Authors:
Hafiz MOHAMMED NAZİFİ, Levent GÜLEN
ABSTRACT
Electromagnetic (EM) profiling and Vertical Electrical Sounding (VES) studies were carried out for groundwater exploration in the Twifo – Hemang Lower Denkyira Districts of Ghana. These two geophysical methods were used for exploring the groundwater potentials beneath Achiase, Mbaa Mpe Hia Community and Moseaso Community. This paper seeks to encourage the use of inversion for interpreting electromagnetic data rather than the usual qualitative interpretation method using line graphs and also the use of apparent resistivity maps as 2D pseudo resistivity maps to support interpretations of the 1D inversion results (in cases where the available budget could not permit 2D and or 3D inversion). These would help in enhancement of obtained results, reduce ambiguity and help decision making. The EM results revealed that; the three communities are underlain by two layers with the first layer having the thickness range between 2 to 10 m and the second layer is a half space. The results from VES studies indicate that; Achiase Community and Mbaa Mpe Hia No. 2 community are underlain by three geoelectrical layers and Moseaso Community is underlain by four geoelectrical layers. On the basis of this study the Moseaso Community is ranked highest in terms of groundwater potential followed by the Achiase community and finally the Mbaa Mpe Hia No.2 Community. Several sites were recommended for drilling boreholes for water supply in these communities.
https://doi.org/10.19111/bulletinofmre.451557
A new species of Nummulites Lamarck (Nummulitidae, Foraminiferida) from Central Turkey
Authors:
Ali DEVECILER
ABSTRACT
A new nummulitid species Nummulites sireli n. sp. is described from the middle Lutetian of the Çayraz section, North of Haymana, South of Ankara, Turkey. The new species is referred in to the N. distans group, of which six other species from the Haymana and Çiçekdağ regions of Central Anatolia are identifi ed.
https://doi.org/10.19111/bulletinofmre.413708
Keywords:
Foraminiferida, Turkey, nummulitidae, middle eocene, nummulites sireli n. sp., Turkey
Structural properties and tectonic signi ficance of a shear zone discovered within the Tauride orogen near Alanya, SW Turkey
Authors:
Volkan ÖZAKSOY
ABSTRACT
A major shear zone, referred to as the Yeşilöz Shear Zone, was discovered in the lower Mahmutlar Nappe of the Alanya Nappe Complex in Alanya region. The nappe shows early transposed folds with axial metamorphic foliation and upright open folds formed during emplacement. The NW-trending shear zone is around 2 km wide and mappable over a length segment of 10 km. The shear zone consists of the metamorphic rocks of the host nappe, but with the phyllite mylonitized by vertical shear foliation and the quartzite and marble dispersed as lenticular bodies. These brittle rock bodies show broken upright folds similar as in the nappe, and also the phyllite shear lenses bear relics of the nappe metamorphic foliation. Analysis of kinematic indices in the shear zone points to a dextral transcurrent deformation. The emplacement of Mahmutlar Nappe caused mild metamorphism of the upper part of underlying nappe and also affected it with the development of the shear zone that extended downwards. The nappe underwent no further translational movement during and after the shear zone formation, which suggests that the ductile transcurrent deformation probably accommodated a residual shortening induced by the emplacement of the next, younger nappe of the Alanya Nappe Complex.
https://doi.org/10.19111/bulletinofmre.502054