In this study, the aim was to determine the petrography, geochemistry and source of the Yürekli volcanics (Biga Peninsula, NW Turkey). Tertiary volcanism is widespread in Western Anatolia (NW Turkey), which is an important area where tectonic and magmatic events are observed together. Yürekli volcanic rocks comprise dacitic lavas and pyroclastics. Dacitic lavas show porphyric and hyaloporphyric texture, and consist of plagioclase, quartz, amphibole, biotite, sanidine and Fe-Ti oxide minerals with apatite and zircon accessory minerals. Petrologically, they have high-potassic and calc-alkaline characteristics. Yürekli volcanics show enrichment in large ion lithophile elements (LILE) and are depleted in high field strength elements (HFSE) on the N-MORB normalized diagram. On the chondrite-normalized rare earth element (REE) plot, light rare earth elements are enriched but heavy rare earth elements are depleted in the rocks. REE patterns are concave shaped (mean LaN/LuN=16–25) and show slight negative Eu anomalies (0.66–0.81). Plagioclase, amphibole and biotite fractional crystallisation and crustal assimilation are important in the evolution of the Yürekli volcanics. According to all data, it can be argued that the Yürekli volcanics formed in a post-collisional setting, and the parental magmas were derived from the melts of enriched lithospheric mantle.
Geochemistry of beach sands from the Bartın and Samsun-Ordu coastal districts, Northern Black Sea, Türkiye: implications for provenance
Authors:
Pelin COŞANAY, Halim MUTLU
ABSTRACT
This study aims to investigate geochemical and petrological characteristics, chemical weathering indices and provenance of the beach sands collected from 11 different sites along the coastlines of Bartın, Samsun and Ordu districts adjacent to mafic and intermediate volcanic rocks on the Pontides. Petrological findings show that the abundance of detrital quartz, feldspar and sedimentary lithic fragments increase in beach sands of the Bartın region where the SiO2 values fall in a wide range (47 to 87 wt.%). The Samsun and Ordu beach sands have moderately low SiO2 (50 to 61 wt. % and 48 to 62 wt. %, respectively) and relatively high Fe2O3 contents. LREE concentrations of investigated beach sands show enrichment patterns. Mafic minerals, especially pyroxene and magnetite grains are represented by eroded or abraded morphologies due to dissolution and erosion processes, while opaque heavy minerals show signs of recycling from basic adjacent rocks with etched to subrounded grain surface textures. The low chemical index of alteration (CIA) estimated for the beach sand samples implies the presence of fresh rock erosion along the coasts. We used magnetite to gain better understanding of the formation and origin of Fe-rich beach sands. The mineral chemistry data indicate that studied magnetites have quite similar composition and the mobility of trace elements exerts a great control on their distribution in magnetite.
Keywords:
Beach sand, Black Sea, Heavy Mineral, Mineral Chemistry, Provenance.
Şile Neogene Basin (ŞNB) is one of the world’s crucial sedimentary clay-sand-coal basins, where approximately 3 million tons of clay and 20 million tons of sand are produced annually. The ŞNB, with a thickness of
Coal quality, mineralogy, petrography, and geochemistry of the high-strontium Bozburun lignite (Malatya, eastern Türkiye)
Authors:
Rıza Görkem OSKAY, Ali İhsan KARAYİĞİT
ABSTRACT
The Bozburun coalfield hosts a late Miocene 1.1 m thick coal seam. This study aims to determine coal quality, mineralogy, petrography and geochemistry, and controlling factors of elemental enrichments. The coals are generally black and greyish black in colour, and the low part of the seam commonly includes fossil shell remains. The ash yield displays a decreasing trend towards the upper part of the seam; in turn, gross calorific and total C values increase upwards. The total S content being generally higher than 5% (on dry basis), displays an increasing trend towards the upper part. In the entire seam, huminite is the most common maceral group, while inertinite and liptinite display variable proportions. The identified minerals by XRD are mainly quartz, clay minerals, calcite, pyrite, and aragonite (in fossil shell remains-bearing samples), whereas feldspars and marcasite determined in a few samples. Furthermore, in the coal samples, celestine and barite were identified
by SEM-EDX. This study indicates that precipitation of celestine and Sr-bearing barite grains during diagenetic stage and Sr-uptake by mollusc within the palaeomire caused Sr enrichment in the entire seam. Overall, the water influx and redox conditions controlled the mineralogical and the elemental compositions of the coal seam.
Ghassem AZİZZADEH, Mostafa RAGHİMİ, Seyed Jamal SHEİKHZAKARİAEE, Aziz RAHİMİ CHAKDEL
Indexed In · Volume 157 / 2018
Geochemical characteristics of Gabbroic rocks in Zyarat in North East of Iran
Authors:
Ghassem AZİZZADEH, Mostafa RAGHİMİ, Seyed Jamal SHEİKHZAKARİAEE, Aziz RAHİMİ CHAKDEL
ABSTRACT
The mafic rocks outcrops exposed in the South of Gorgan, northeastern of Iran. These gabbroic rocks are intruded into the Middle–Upper Paleozoic sedimentary rocks and Gorgan schist units representing a part of the north Gondwana province. Petrography studies of these rocks show medium to coarse grained sizes and the texture varies from ophitic to intergranular under polarized microscope. The mineralogical composition of mafic dykes is dominated by large crystals of clinopyroxene + orthopyroxene + plagioclase and hornblende. These rocks can be classified as gabbroic rock. Geochemical studies show that these rocks have low to medium K2O contents. The trace element data shows low La/Nb ratios and LREE enrichment (La/Yb 10–21.4). The high LREE/HREE ratios and low Y content corresponding high Ti/Y ratios of the gabbros suggest that they could be derived from melt fractions of a garnet stable source. Considering that the REE plot and tectonic diagrams of the region's gabbro are similar to that of OIB (Ocean island basalt), the former's origin is the same as that of OIB magmas.
DOI: 10.19111/bulletinofmre.413716
Investigation of thermal and mechanical behavıors of construction materials obtained from some natural stone waste
Authors:
Gökhan EROL, Devrim PEKDEMİR
ABSTRACT
In this study, thermal and mechanical behaviours of composite building materials obtained from different kinds of natural stone wastes were investigated. First of all, XRD, chemical and grain size distribution analyses were carried out to identify the natural stone wastes to be used. 60% granite (magmatic), 35% recrystallized limestone (metamorphic) and 5% pure aluminium oxide (Al2O3) materials were used in the prepared mixture. The prepared mixture was shaped in a steel mould 75x20x50 mm in size by adding 7% shaping water and fired at 1140 ° C, 1150 ° C and 1160 ° C. Following that XRD analyses, colour determination, water absorption coefficient, bending strength, Young’s Modulus, bulk density, apparent density and open porosity tests were performed on the samples. According to the XRD analyses results gehlenite, anorthite and wollastonite phases were detected. In accordance with the results of other experiments and analysis, it was found that bending strength, Young’s Modulus and mass density values have increased, but on the other hand water absorption coefficient, apparent density and open porosity values had decreased after the firing process.
DOI: 10.19111/bulletinofmre.428318
Optimization of some parameters on desulfurization process of Muğla Yatağan Bağyaka lignite by ultrasonic waves
Authors:
İlkay ÜNAL SANSAR
ABSTRACT
In this study, the desulfurization process developed using ultrasonic waves for Muğla Yatağan Bağyaka lignite had the optimum conditions for parameters affecting the ash and sulfur removal potentials determined with the Surface Response Method and a model created. The process parameters to obtain optimum desulfurization and ash removal were chosen as the ultrasonic treatment time, solid content, concentration of chemical reactive (H2O2) and reactive volume, and the optimum values were determined. Using this data with the aid of the Design Export 7.0 program, the regression model was found as a second degree polynomial equation. The coefficients of determination (R2) for desulfurization and ash removal regressions were 0.96 and 0.97, respectively, in the determined model. The model prediction values and experimental results for desulfurization and ash removal in the investigated parameter intervals were compared and the fit was identified. In the experimental removal of sulfur types with optimum desulfurization it was found that pyritic 17.02%, sulfate 16.67% and organic 9.52%
DOI: 10.19111/bulletinofmre.417405