Neotectonics, Geothermal Springs, Neotectonic Provinces, Hot-Dry Rock, Temperature Map
Abstract:
Favorable conditions for geothermal energy were created in Türkiye during its neotectonic episode from Neogene to Quaternary. This episode is characterized mainly by fluvio-lacustrine sedimentation and strike-slip tectonics with associated magmatism. Under these conditions, a great number of geothermal areas have formed in the neotectonics provinces in association with major tectonic features, including the North and East Anatolian Fault Zones (NAFZ and EAFZ, respectively). Today, the geothermal resources of Türkiye are mainly located in the West Anatolian Extensional Province associated with the graben systems. However, the Central Anatolian Ova Neotectonic Province is considered one of the most promising geothermal targets which are characterized by the presence of widespread hot dry rock systems. This study mainly aims to throw light on the possible potentiality of these resources at Kırşehir Block by emphasizing the neotectonic evolution of the country.
Neotectonics and geothermal potential of the East Anatolian Tectonic Block: A case study in Diyadin (Ağrı) geothermal field, NE Türkiye
Authors:
Ali KOÇYİĞİT
ABSTRACT
Diyadin is situated 71 km ESE of Ağrı nearby the Turkish-Iranian State border in the east Anatolian tectonic block. It is only one of several type localities of promising geothermal fields in eastern Anatolia. The neotectonic regime and related fault zones in the Eastern Anatolia are dominated by a strike-slip tectonic regime governed by a stress field state, in which the greatest principal compressive stress (σ1) is operating in NNW direction (N22°W) while the least principal stress axis (σ3) or extension direction is N68°E. This stress field state was proved once more by the tensor solution of the 12 June 2022 Akçift (Muradiye-Van) earthquake of Mw = 5.1. The strike-slip neotectonic regime started at the time of latest Pliocene-early Quaternary and then triggered the first occurrence of the fissure eruption along the NNW trending Kaletepe open fracture. This event was followed by the development of both the two-peaked Tendürek strato-shild volcano and the Diyadin geothermal field (DGF). The most common manifestations of the DGF are the active tectonic regime and related faults, active volcanoes, fumeroles, numerous hot water springs to artesian wells, widespread ironrich alteration zones, actively growing fissure-ridge travertines and the probable presence of the shallow-seated and unroofed hypabyssal felsic to intermediate intrusions of Quaternary age.
Keywords:
Diyadin Geothermal Field, Thermogene Fissure-ridge Travertine, Active Volcano, Active Strike-slip Tectonic Regime.
Structural Geology, Active tectonics · Volume 172 / December 2023 · Pages: 119-140
Ali KOÇYİĞİT
Indexed In · Volume 172 / December 2023
Neotectonics of the Sarıköy-İnova and Çan-Bayramiç-Ezine fault zones: basin formation, age and slip rates, NW Anatolia-Türkiye
Authors:
Ali KOÇYİĞİT
ABSTRACT
The Sarıköy-İnova and the Çan-Bayramiç-Ezine fault zones (SIFZ, ÇBEFZ) comprise the southern strand of the North Anatolian Fault System in the Biga Peninsula. They are located in the area between Sarıköy to northeast and the Dalyan settlement around Bozcaada in the North Aegean Sea to southwest. Both of the fault zones are active. This is evidenced by the 6 March 1737 (Ms =7.0) İnova, 1st February 1809 Hurma (Ms = 6.1), and the 8 February 1826 Güllüce (Ms = 6.2) historical earthquakes resulted from these fault zones. Maximum lengths of fault segments comprising the SIFZ and the ÇBEFZ are 14 km and 15 km, respectively. Based on the maximum lengths of fault segments, the magnitude of the peak earthquakes to be originated from these faults are Mw = 6.3 and 6.6, respectively. Based on both the geological and geographic markers, the total right lateral offsets accumulated on the SIFZ and ÇBEFZ are 12 km and 20 km, respectively. These offset values imply to the slip rates of 4.6 mm/yr and 7.7 mm/yr, respectively. Five pull-apart basins were developed on both fault zones. These are the Sarıköy, İnova, Kazabat, Çan and Ezine-Bayramiç basins. The first three of them are pure strike-slip pull-apart basins, while the type of the rest basins is superimposed. The angular unconformity between the nondeformed basin fill of Quaternary age and the folded to thrust-faulted basement rocks of pre-Quaternary age reveals strongly that the pull-apart basins have formed during the Quaternary time. This relationship also reveals that the commencement age of the strike-slip neotectonic regime and formation of associated fault zones are the Early Quaternary. This work was dedicated to the retirement memory of Dr. Fuat Şaroğlu.
Kosovo is located in a key position in the central-west part of the Balkans providing an opportunity to understand the far-field effects of distributed intracontinental deformation caused by the Aegean extension in the south and Adriatic compression in the west. It is also situated along the NE-SW trending Shkodër-Pejë transverse zone, where the Dinarides and Albanides-Hellenides orogenic belts are juxtaposed. While the instrumental seismicity of Kosovo indicates the activity of this fault zone and many others, the active faults in the country were not discussed in detail in the current literature. In this study, we analyzed both the geomorphic and structural features of major mountain front faults in western Kosovo (i.e., Pejë, Istog, Krojmir, and Prizren faults) to reveal the relative assessment of their activities and kinematic characters. Geomorphic and morphometric analyses of all the studied four different mountain fronts indicated high activity and tectonic uplift rates of over 0.5 mm/a. On the other hand, according to the collected kinematic data from the observed fault planes, the studied faults are mainly of normal character representing a dominance of NWSE- directed extension in western Kosovo, which is most probably caused by the rollback of the subducting slab in the Hellenic trench.
Keywords:
Neotectonics, Extensional Tectonics, Shkodër-Pejë Fault Zone, Balkans, Southeast Europe.
Neotectonics and geothermal potential of the East Anatolian Tectonic Block: A case study in Diyadin (Ağrı) geothermal field, NE Türkiye
Authors:
Ali KOÇYİĞİT
ABSTRACT
Diyadin is situated 71 km ESE of Ağrı nearby the Turkish-Iranian State border in the east Anatolian tectonic block. It is only one of several type localities of promising geothermal fields in eastern Anatolia. The neotectonic regime and related fault zones in the Eastern Anatolia are dominated by a strike-slip tectonic regime governed by a stress field state, in which the greatest principal compressive stress (σ1) is operating in NNW direction (N22°W) while the least principal stress axis (σ3) or extension direction is N68°E. This stress field state was proved once more by the tensor solution of the 12 June 2022 Akçift (Muradiye-Van) earthquake of Mw = 5.1. The strike-slip neotectonic regime started at the time of latest Pliocene-early Quaternary and then triggered the first occurrence of the fissure eruption along the NNW trending Kaletepe open fracture. This event was followed by the development of both the two-peaked Tendürek strato-shild volcano and the Diyadin geothermal field (DGF). The most common manifestations of the DGF are the active tectonic regime and related faults, active volcanoes, fumeroles, numerous hot water springs to artesian wells, widespread ironrich alteration zones, actively growing fissure-ridge travertines and the probable presence of the shallow-seated and unroofed hypabyssal felsic to intermediate intrusions of Quaternary age.
Keywords:
Diyadin Geothermal Field, Thermogene Fissure-ridge Travertine, Active Volcano, Active Strike-slip Tectonic Regime.
Geothermal researches, geothermal energy · Volume 171 / August 2023 · Pages: 69-91
Mehmet Furkan ŞENER, Taygun UZELLİ, İbrahim AKKUŞ, Orhan MERTOĞLU, Alper BABA
Indexed In · Volume 171 / August 2023
The potential, utilization and development of geothermal energy in Türkiye
Authors:
Mehmet Furkan ŞENER, Taygun UZELLİ, İbrahim AKKUŞ, Orhan MERTOĞLU, Alper BABA
ABSTRACT
Geothermal energy is a natural resource that can be utilized directly or by converting to other types of energy. Considering the diversity of the geological structure of Türkiye, the geothermal systems have developed depending on young tectonic and volcanic active rock. Western and Central Anatolia are especially rich in geothermal resources. The geothermal well with the hottest wellbottom temperature was drilled in Central Anatolia, and the well-bottom temperature was measured as 341°C at a depth of 3845 meters. In 2022, Türkiye’s electricity generation capacity and the total installed direct heat use reached 1663 MWe and 5113 MWt, respectively. Considering Anatolia’s Curie depth and heat flux, the probable thickness of the batholith can be regarded as 10 km. For example, the total granitoid area of Western Anatolia is 4221 km2 and at least 2% of this granitoid can provide approximately 8x107 MWh of electricity by Enhanced Deep Geothermal Systems (EDGS). When all granites in Türkiye are considered, it is expected that the future capacity of Türkiye will be much higher with drilling research and development studies and the discovery of new fields. This capacity will exceed 100.000 MWt levels in the medium term, especially with the addition of EDGSs.
Importance of reinjection in sustainability of geothermal resources and reinjection well locations in Türkiye
Authors:
Nilgün DOĞDU, Oktay ÇELMEN
ABSTRACT
Sustainability of geothermal energy is related with the type of geothermal resources (natural springs, well), usage situations (thermal, residential-greenhouse heating, energy, etc.), amount of use (optimal flow, appropriate pressure-temperature changes), conservation of resources, and is mostly achieved by reinjection of the geothermal fluid returning from usage. It is important to take measures to prevent adverse changes in temperature and pressure conditions in the reservoir to properly remove the fluid returning from use in geothermal areas from the environment and recharge the reservoir. Reinjection should be carried out under appropriate conditions for the protection of resources. In the operation of geothermal resources, reinjection/discharge conditions and obligations are also specified in the provisions of the Law No. 5686 and the implementing regulation. Various studies within the scope of exploration activities in geothermal fields, determining the productionreinjection areas and determination the location of the reinjection wells in conditions that will not adversely affect the production pressure-temperature conditions are of great importance for the sustainability of the geothermal reservoir.