Neotectonics, Extensional Tectonics, Shkodër-Pejë Fault Zone, Balkans, Southeast Europe.
Abstract:
Kosovo is located in a key position in the central-west part of the Balkans providing an opportunity to understand the far-field effects of distributed intracontinental deformation caused by the Aegean extension in the south and Adriatic compression in the west. It is also situated along the NE-SW trending Shkodër-Pejë transverse zone, where the Dinarides and Albanides-Hellenides orogenic belts are juxtaposed. While the instrumental seismicity of Kosovo indicates the activity of this fault zone and many others, the active faults in the country were not discussed in detail in the current literature. In this study, we analyzed both the geomorphic and structural features of major mountain front faults in western Kosovo (i.e., Pejë, Istog, Krojmir, and Prizren faults) to reveal the relative assessment of their activities and kinematic characters. Geomorphic and morphometric analyses of all the studied four different mountain fronts indicated high activity and tectonic uplift rates of over 0.5 mm/a. On the other hand, according to the collected kinematic data from the observed fault planes, the studied faults are mainly of normal character representing a dominance of NWSE- directed extension in western Kosovo, which is most probably caused by the rollback of the subducting slab in the Hellenic trench.
Ramazan SARI, Zehra DEVECI ARAL, Şahset KÜÇÜKEFE, Elif Dilek BAYRAKÇIOĞLU, Ahmet Metin ÖTELEŞ, Mehmet Barış DURGUN, Buğra ÇAVDAR, Cahit DÖNMEZ
Indexed In · Volume 179 / April 2026
Formation characteristics of newly discovered Akçal (Balıkesir) Au-Ag epithermal mineralization in Extensional Tectonics of Biga Peninsula, Western Tethyan Belt
Authors:
Ramazan SARI, Zehra DEVECI ARAL, Şahset KÜÇÜKEFE, Elif Dilek BAYRAKÇIOĞLU, Ahmet Metin ÖTELEŞ, Mehmet Barış DURGUN, Buğra ÇAVDAR, Cahit DÖNMEZ
ABSTRACT
Akçal Au-Ag mineralization is located in one of the most important metallogenic provinces in Tethys Orogenic Belt, Biga Peninsula. In the study area, widespread argillic alteration is observed and mined in previous years. Recent surface exploration and drillhole operation studies indicate that extensional tectonic-related, structurally-controlled Au-Ag mineralization developed parallel along E-W, N55-75E and N30W-trending tectonic zones and NE-SW-trending secondary tectonic zones. Based on field observations and mineralogical-petrographic studies, mineralization was formed in Şapçı volcanics where fluids caused widespread advanced argillic, argillic and propylitic alteration in the study area. Fluid inclusion analyses were performed on transparent-semi-transparent (quartz) crystals in the argillic alteration zone. The primary inclusions consist of two-phase (liquid+gas) inclusions. The homogeniSation temperature was determined as 190-240°C and the salinity as 0.7- 2.7% NaCl in the fluid inclusion measurements. Field observations, mineralogical-petrographic studies, and fluid inclusion data indicate that Au-Ag mineralization occurs in an epithermal system and that the mineralization is not eroded. In west-northwest Anatolia, formation temperature and salinities of the Miocene-aged extensional-related Au-Ag deposits are quite compatible with the formation temperature 190-240°C, 0.7-2.7% NaCl salinity of Akçal Au-Ag deposit. Due to this feature, Akçal mineralization is quite similar to low/medium sulfidation epithermal system deposits.
Neotectonics and geothermal potential of the East Anatolian Tectonic Block: A case study in Diyadin (Ağrı) geothermal field, NE Türkiye
Authors:
Ali KOÇYİĞİT
ABSTRACT
Diyadin is situated 71 km ESE of Ağrı nearby the Turkish-Iranian State border in the east Anatolian tectonic block. It is only one of several type localities of promising geothermal fields in eastern Anatolia. The neotectonic regime and related fault zones in the Eastern Anatolia are dominated by a strike-slip tectonic regime governed by a stress field state, in which the greatest principal compressive stress (σ1) is operating in NNW direction (N22°W) while the least principal stress axis (σ3) or extension direction is N68°E. This stress field state was proved once more by the tensor solution of the 12 June 2022 Akçift (Muradiye-Van) earthquake of Mw = 5.1. The strike-slip neotectonic regime started at the time of latest Pliocene-early Quaternary and then triggered the first occurrence of the fissure eruption along the NNW trending Kaletepe open fracture. This event was followed by the development of both the two-peaked Tendürek strato-shild volcano and the Diyadin geothermal field (DGF). The most common manifestations of the DGF are the active tectonic regime and related faults, active volcanoes, fumeroles, numerous hot water springs to artesian wells, widespread ironrich alteration zones, actively growing fissure-ridge travertines and the probable presence of the shallow-seated and unroofed hypabyssal felsic to intermediate intrusions of Quaternary age.
Keywords:
Diyadin Geothermal Field, Thermogene Fissure-ridge Travertine, Active Volcano, Active Strike-slip Tectonic Regime.
Structural Geology, Active tectonics · Volume 172 / December 2023 · Pages: 119-140
Ali KOÇYİĞİT
Indexed In · Volume 172 / December 2023
Neotectonics of the Sarıköy-İnova and Çan-Bayramiç-Ezine fault zones: basin formation, age and slip rates, NW Anatolia-Türkiye
Authors:
Ali KOÇYİĞİT
ABSTRACT
The Sarıköy-İnova and the Çan-Bayramiç-Ezine fault zones (SIFZ, ÇBEFZ) comprise the southern strand of the North Anatolian Fault System in the Biga Peninsula. They are located in the area between Sarıköy to northeast and the Dalyan settlement around Bozcaada in the North Aegean Sea to southwest. Both of the fault zones are active. This is evidenced by the 6 March 1737 (Ms =7.0) İnova, 1st February 1809 Hurma (Ms = 6.1), and the 8 February 1826 Güllüce (Ms = 6.2) historical earthquakes resulted from these fault zones. Maximum lengths of fault segments comprising the SIFZ and the ÇBEFZ are 14 km and 15 km, respectively. Based on the maximum lengths of fault segments, the magnitude of the peak earthquakes to be originated from these faults are Mw = 6.3 and 6.6, respectively. Based on both the geological and geographic markers, the total right lateral offsets accumulated on the SIFZ and ÇBEFZ are 12 km and 20 km, respectively. These offset values imply to the slip rates of 4.6 mm/yr and 7.7 mm/yr, respectively. Five pull-apart basins were developed on both fault zones. These are the Sarıköy, İnova, Kazabat, Çan and Ezine-Bayramiç basins. The first three of them are pure strike-slip pull-apart basins, while the type of the rest basins is superimposed. The angular unconformity between the nondeformed basin fill of Quaternary age and the folded to thrust-faulted basement rocks of pre-Quaternary age reveals strongly that the pull-apart basins have formed during the Quaternary time. This relationship also reveals that the commencement age of the strike-slip neotectonic regime and formation of associated fault zones are the Early Quaternary. This work was dedicated to the retirement memory of Dr. Fuat Şaroğlu.
Vitrinite reflectances and mineralogy of coal clasts in the Late Carboniferous sequences in the two-deep research wells from the Kozlu coalfield (Zonguldak Basin, NW Türkiye)
Authors:
Ali İhsan KARAYİĞİT, Rıza Görkem OSKAY
ABSTRACT
Fifty-four coal clast samples in the siliciclastic rocks (e.g., sandstone and conglomerate) were collected from cores of two-deep research wells (K20H and K20K) drilled at the Kozlu coalfield in Zonguldak Basin, and for the first time, they were evaluated using mineralogy by XRD and SEMEDX and random vitrinite reflectance (%Rr) measurements in order to find out their origin and timing. Petrographic observations on polish surfaces show that the coal clasts are either entirely xylitic/vitrinitic particles or coals including a broader range of macerals. The detected minerals in the samples are mostly derived from the parental coal seams and, to a lesser extent, precipitated from penetrated pore-water in the cleats/fractures of clasts. The %Rr values of coal clasts in Carboniferous sediments are generally relatively higher than those measured in the coal seams due to weak oxidation during transportation. Furthermore, similar mineralogical and maceral compositions between coal clasts and coal seams imply that these clasts were mainly eroded during the peatification and/or early coalification of parental seams and display similar coalification patterns. The close %Rr value of a coal clast sample in the Early Aptian Zonguldak Formation and Carboniferous coal seams could suggest that this coal clast sample is presumably derived from the coal seams eroded during Early Aptian.
Keywords:
Zonguldak Basin, Late Carboniferous, Coal Petrography, Coal Clast, Erosion of Coal Seams.
Kamil KAYABALI, Turgay BEYAZ, İlknur KARAASLAN ÖZDEMİR, Deniz YILMAZ
Indexed In · Volume 173 / April 2024
A simple and practical tool for indirect determination of the unconfined compressive strength of most common construction materials
Authors:
Kamil KAYABALI, Turgay BEYAZ, İlknur KARAASLAN ÖZDEMİR, Deniz YILMAZ
ABSTRACT
Determination of the unconfined compressive strength (UCS) of construction materials in the laboratory is tedious and time-consuming. There have been many attempts to indirectly predict UCS using simpler tools and techniques. One of them is the nail gun. The scope of this investigation is to design a nailer which can be applied all construction materials whose UCS range from 1-100 MPa. In the research, rocks, bricks, and concretes prepared in different cement/sand ratios with different strength ranges were used as materials. The unconfined compressive strength of the materials used in the experiments was first determined by conventional compression tests. The nail penetration depths were determined by conducting experiments on the same materials using a nailer with two different energy levels. An empirical relationship was developed by using nail penetration depths, driving energies, and nail diameters as the independent variables and the UCS determined by the conventional method as the dependent variable. According to the empirical relationship determined by multiple regression analysis, the UCS of building materials can be estimated with significance level of 99% by the nail penetration method. The research also revealed that the UCS of rocks might have a coefficient of variation as high as 30%.
Keywords:
Compressive strength, building materials, nail gun, driving energy.
İpek F. BARUT, Engin MERİÇ, Mustafa ERYILMAZ, Atike NAZİK, Feyza DİNÇER, Erol KAM
Indexed In · Volume 173 / April 2024
Evaluation of radioactive properties and microfaunal evidence in the Bosphorus and the Dardanelles straits and Golden Horn sediments
Authors:
İpek F. BARUT, Engin MERİÇ, Mustafa ERYILMAZ, Atike NAZİK, Feyza DİNÇER, Erol KAM
ABSTRACT
The aim of this study is to investigate radioactive pollutants from pollution loads transported from the Black Sea to the Aegean Sea by the Turkish Straits System and their effects on microfauna (benthic foraminifer and ostracod) assemblages. In the study, the effects of gross alpha and beta activity on the species number, species diversity, dominant species and species richness of benthic foraminiferal and ostracod assemblages were investigated in 16 bottom sediments taken from different depths in the Golden Horn, Bosphorus and Dardanelles straits. In the studied sediment samples examined 61 genera and 64 species of benthic foraminifera, 23 genera and 26 species of ostracoda were identified. In addition two migratory foraminifera species were observed as Spiroloculina antillarum of Atlantic-Pacific origin and Peneroplis pertusus of Indo-Pacific origin. A relationship between the abundance of microfauna and high gross alpha and beta values was found in the Dardanelles samples, but not in the Bosphorus and Golden Horn samples. In this study, the highest radioactivity value was observed in the deepest bottom sediment samples. Consequently, the gross alpha and beta values were seen to be close to each other in the Dardanelles Strait and Golden Horn samples, and they had a broad-spectrum in the Bosphorus samples.
Keywords:
Bosphorus and Dardanelles Straits (Türkiye), Sediment, Golden Horn (Istanbul), Gross alpha and beta, Microfauna (benthic foraminifera, ostracoda).