Home›Vitrinite reflectances and mineralogy of coal clasts in the Late Carboniferous sequences in the two-deep research wells from the Kozlu coalfield (Zonguldak Basin, NW Türkiye)
Article Details
Vitrinite reflectances and mineralogy of coal clasts in the Late Carboniferous sequences in the two-deep research wells from the Kozlu coalfield (Zonguldak Basin, NW Türkiye)
BULLETIN OF THE MINERAL RESEARCH AND EXPLORATION (MTA Dergisi)
Article Details
Vitrinite reflectances and mineralogy of coal clasts in the Late Carboniferous sequences in the two-deep research wells from the Kozlu coalfield (Zonguldak Basin, NW Türkiye)
Zonguldak Basin, Late Carboniferous, Coal Petrography, Coal Clast, Erosion of Coal Seams.
Abstract:
Fifty-four coal clast samples in the siliciclastic rocks (e.g., sandstone and conglomerate) were collected from cores of two-deep research wells (K20H and K20K) drilled at the Kozlu coalfield in Zonguldak Basin, and for the first time, they were evaluated using mineralogy by XRD and SEMEDX and random vitrinite reflectance (%Rr) measurements in order to find out their origin and timing. Petrographic observations on polish surfaces show that the coal clasts are either entirely xylitic/vitrinitic particles or coals including a broader range of macerals. The detected minerals in the samples are mostly derived from the parental coal seams and, to a lesser extent, precipitated from penetrated pore-water in the cleats/fractures of clasts. The %Rr values of coal clasts in Carboniferous sediments are generally relatively higher than those measured in the coal seams due to weak oxidation during transportation. Furthermore, similar mineralogical and maceral compositions between coal clasts and coal seams imply that these clasts were mainly eroded during the peatification and/or early coalification of parental seams and display similar coalification patterns. The close %Rr value of a coal clast sample in the Early Aptian Zonguldak Formation and Carboniferous coal seams could suggest that this coal clast sample is presumably derived from the coal seams eroded during Early Aptian.
Muhammed Emin BULGUROĞLU, Ali SARI, Sofiane BELHOCINE, Mehmet Sıddık KIZIL, Turhan AYYILDIZ, Demet Banu KORALAY
Indexed In · Volume 177 / August 2025
Geological and reservoir modelling of coalbed methane in Karadon Region of Zonguldak Basin (Türkiye): A case study
Authors:
Muhammed Emin BULGUROĞLU, Ali SARI, Sofiane BELHOCINE, Mehmet Sıddık KIZIL, Turhan AYYILDIZ, Demet Banu KORALAY
ABSTRACT
The Zonguldak Basin stands out as Türkiye’s primary hub for bituminous coal production alongside a notable coalbed methane content of mined coal seams. In this study, we are proposing for the first time an integrated approach of geological modelling, reservoir characterization, and production forecasting of one coalbed methane block within Zonguldak Basin to understand the potential of this unconventional resource. The study initiated with the development of a 3D geological model data from the Karadon coal mine. Results of several laboratory tests conducted on coal samples such as desorption capacity which is measured as 666.67 scf/ton is integrated into the model. A reservoir model was developed by incorporating gas composition, pressure-volume-temperature (PVT) characteristics, and special core analysis (SCAL) data. A combination of 1,2,3,4 and 5 wells scenarios is proposed to figure out the best production solution adapted to the study area. As a result, a 5-wells configuration also known as the “5 spot wells” layout is selected. Five wells will be in the same well pad but deviated 600 meters distance in target zones. Each well in the pad includes two frac stages at two separated coal and shale interbedded intervals. The final volumetric projection suggests a cumulative gas production estimates around 1.803 billion m3 from 5 wells, which confirms the potential of coalbed methane as an important additional energy resource to Türkiye’s economy.
Keywords:
Coalbed methane, Zonguldak Basin, Geological Modelling, Reservoir Simulation, Production Forecast.
Petrographic and palynological investigations of Sinanpaşa (Afyon) Miocene coals
Authors:
Elif AKISKA
ABSTRACT
In this study, petrographical and palynological analyses of coal samples from two regions (the Kırka region in the south, and the Karacaören region in the north) of the Sinanpaşa (Afyon) Neogene basin were performed. The coal-bearing Neogene sediments indicate the occurrence of fi ve facies: paleosol, matrix-supported conglomerate, coal-bearing mudstone, sandstone-claystone and laminated mudstones. Coal layers are mainly within coal-bearing mudstone facies. In addition, there are various types of coalifi ed materials in matrix-supported conglomerate and sandstone-claystone facies. Based on coal petrography, an interpretation of the coal-forming environment was made. The investigated coals mainly contain a huminite maceral group. From the refl ection values (Rmax), these coals can be classifi ed as sub-bituminous in rank, and as being deposited in swamp zones associated with limnic environments. The palynological data indicates that all studied coal-bearing units are of Mid-Miocene age. On the other hand, based on MAT, CMT, WMT and MAP parameters, it can be stated that at that time climatic conditions changed seasonally in the study area. Humid climatic conditions prevailed during the period when the peat was formed, then later transformed into the coal layers examined in this manuscript.
http://dx.doi.org/10.19111/bulletinofmre.363345
Modelling and computation of gravitational attraction, gradient tensors, rotational and horizontal invariants of Asteroid Bennu (101955), Itokawa (25143) and Eros (433) via 2D Non-Uniform FFT
Authors:
İlkin ÖZSÖZ
ABSTRACT
The internal structure and mass distribution of the terrestrial objects are yet unknown. The 2D gravity model with a constant density of the terrestrial objects can shed light on the surficial or textural heterogeneity due to topographic variations of the terrestrial objects. Three different steroids, which are Bennu (101955), Itokawa (25143) and Eros (433) are modelled in this study. During the modelling phase, a different number of edges, elements, nodes, and faces are used to describe the 3D models of Bennu, Itokawa, and Eros. These 3D models are used in 2D Non-Uniform Fast Fourier Transform (NU-FFT) applications to obtain gravitational attraction with a constant density polyhedron model. Tensor gradients and tensor invariants of the modelled gravity anomaly are calculated. Three major outcomes are interpreted from tensor gradient and tensor invariants. Firstly, textural heterogeneity due to relatively low topography is detected in the central part of Bennu. Secondly, considerably different properties which can be related to surface variations between the two lobes of Itokawa are observed. Lastly, directional surficial heterogeneities were detected in Eros.
Muhittin GÖRMÜŞ, Mustafa YILDIZ, Alper BOZKURT, Aynur HAKYEMEZ
Indexed In · Volume 173 / April 2024
Paleocene-Eocene foraminifera from the Tuz Gölü Basin (Salt Lake Basin, Central Türkiye) and their paleoenvironmental interpretations
Authors:
Muhittin GÖRMÜŞ, Mustafa YILDIZ, Alper BOZKURT, Aynur HAKYEMEZ
ABSTRACT
Paleocene-Eocene aged sediments from the east of Tuz Gölü Basin (Central Türkiye) provide significant data for foraminifera contents and their paleoenvironmental clues. They are important in revealing the stratigraphy of the region and the Paleocene-Eocene geological history of Türkiye. The sediments, composed mainly of carbonates, are known as Karapınaryaylası Formation. In this formation, benthic foraminifera representing SBZ2 to SBZ12 biozones corresponding to the Selandian-Late Cuisian time interval were identified in ten measured stratigraphical sections. The zonal interval from the E7 Zone (late Ypresian) to the E10 Zone (Lutetian) is characterized by the marker species of planktonic foraminifera defined in the clayey limestones from the uppermost part. The studied formation is divided into four main facies and eleven sub-microfacies types. The clayey limestone levels of the Karapınaryaylası Formation, which generally starts with a transgressive sequence, contain abundant planktonic foraminifers, while the lithologies of grainstone, packstone and wackestone are rich in benthic foraminifers. Benthic foraminifer assemblages indicate different paleoenvironments from lagoon to back-bank, bank and fore-bank. The obtained foraminiferal data show the Selandian-Lutetian age range and various paleoenvironments from the lagoon to the open sea.
Kamil KAYABALI, Turgay BEYAZ, İlknur KARAASLAN ÖZDEMİR, Deniz YILMAZ
Indexed In · Volume 173 / April 2024
A simple and practical tool for indirect determination of the unconfined compressive strength of most common construction materials
Authors:
Kamil KAYABALI, Turgay BEYAZ, İlknur KARAASLAN ÖZDEMİR, Deniz YILMAZ
ABSTRACT
Determination of the unconfined compressive strength (UCS) of construction materials in the laboratory is tedious and time-consuming. There have been many attempts to indirectly predict UCS using simpler tools and techniques. One of them is the nail gun. The scope of this investigation is to design a nailer which can be applied all construction materials whose UCS range from 1-100 MPa. In the research, rocks, bricks, and concretes prepared in different cement/sand ratios with different strength ranges were used as materials. The unconfined compressive strength of the materials used in the experiments was first determined by conventional compression tests. The nail penetration depths were determined by conducting experiments on the same materials using a nailer with two different energy levels. An empirical relationship was developed by using nail penetration depths, driving energies, and nail diameters as the independent variables and the UCS determined by the conventional method as the dependent variable. According to the empirical relationship determined by multiple regression analysis, the UCS of building materials can be estimated with significance level of 99% by the nail penetration method. The research also revealed that the UCS of rocks might have a coefficient of variation as high as 30%.
Keywords:
Compressive strength, building materials, nail gun, driving energy.