Magnetic modeling; Aeromagnetic data; Particle Swarm Optimization (PSO); Minerals; Depths.
Abstract:
Magnetic inversion techniques have been implemented to infer the extension and geometry of magnetic structures and also evaluate its influence on mineralization within Abakaliki and its environs, southeastern Nigeria. The modeling approach considers the techniques of threedimensional (3D) magnetic data inversion, Euler deconvolution, analytic signal inversion, Enhanced Local Wavenumber (ELW) Technique and Particle Swarm Optimization (PSO) to estimate source parameters and compare results. Model solutions were interpreted to represent possible geologic units with varying trends, housing mineralization within the study region. Results from inversion computation over some active mine locations show subsurface bodies with magnetic susceptibilities >0.00188 SI. Model results also show structural sources with almost 5.5 km depth extension, stretching 18 km in the EW direction at Ngbo – Ekerigwe location. This could imply significant mineral deposits at the location. Inversion of both magnetic anomaly and analytical signal enabled derivation of the actual subsurface structures in the region, with most of the structures appearing as dykes with depths ranging from 0.2 – 1.8 km at most of the mining sites. Location and depths of some of the modeled intrusions have been corroborated with the active on-site mines. The delineation of mineralization structures by this study would guide systematic exploration in the region.
Vitrinite reflectances and mineralogy of coal clasts in the Late Carboniferous sequences in the two-deep research wells from the Kozlu coalfield (Zonguldak Basin, NW Türkiye)
Authors:
Ali İhsan KARAYİĞİT, Rıza Görkem OSKAY
ABSTRACT
Fifty-four coal clast samples in the siliciclastic rocks (e.g., sandstone and conglomerate) were collected from cores of two-deep research wells (K20H and K20K) drilled at the Kozlu coalfield in Zonguldak Basin, and for the first time, they were evaluated using mineralogy by XRD and SEMEDX and random vitrinite reflectance (%Rr) measurements in order to find out their origin and timing. Petrographic observations on polish surfaces show that the coal clasts are either entirely xylitic/vitrinitic particles or coals including a broader range of macerals. The detected minerals in the samples are mostly derived from the parental coal seams and, to a lesser extent, precipitated from penetrated pore-water in the cleats/fractures of clasts. The %Rr values of coal clasts in Carboniferous sediments are generally relatively higher than those measured in the coal seams due to weak oxidation during transportation. Furthermore, similar mineralogical and maceral compositions between coal clasts and coal seams imply that these clasts were mainly eroded during the peatification and/or early coalification of parental seams and display similar coalification patterns. The close %Rr value of a coal clast sample in the Early Aptian Zonguldak Formation and Carboniferous coal seams could suggest that this coal clast sample is presumably derived from the coal seams eroded during Early Aptian.
Keywords:
Zonguldak Basin, Late Carboniferous, Coal Petrography, Coal Clast, Erosion of Coal Seams.
Kosovo is located in a key position in the central-west part of the Balkans providing an opportunity to understand the far-field effects of distributed intracontinental deformation caused by the Aegean extension in the south and Adriatic compression in the west. It is also situated along the NE-SW trending Shkodër-Pejë transverse zone, where the Dinarides and Albanides-Hellenides orogenic belts are juxtaposed. While the instrumental seismicity of Kosovo indicates the activity of this fault zone and many others, the active faults in the country were not discussed in detail in the current literature. In this study, we analyzed both the geomorphic and structural features of major mountain front faults in western Kosovo (i.e., Pejë, Istog, Krojmir, and Prizren faults) to reveal the relative assessment of their activities and kinematic characters. Geomorphic and morphometric analyses of all the studied four different mountain fronts indicated high activity and tectonic uplift rates of over 0.5 mm/a. On the other hand, according to the collected kinematic data from the observed fault planes, the studied faults are mainly of normal character representing a dominance of NWSE- directed extension in western Kosovo, which is most probably caused by the rollback of the subducting slab in the Hellenic trench.
Keywords:
Neotectonics, Extensional Tectonics, Shkodër-Pejë Fault Zone, Balkans, Southeast Europe.
Kamil KAYABALI, Turgay BEYAZ, İlknur KARAASLAN ÖZDEMİR, Deniz YILMAZ
Indexed In · Volume 173 / April 2024
A simple and practical tool for indirect determination of the unconfined compressive strength of most common construction materials
Authors:
Kamil KAYABALI, Turgay BEYAZ, İlknur KARAASLAN ÖZDEMİR, Deniz YILMAZ
ABSTRACT
Determination of the unconfined compressive strength (UCS) of construction materials in the laboratory is tedious and time-consuming. There have been many attempts to indirectly predict UCS using simpler tools and techniques. One of them is the nail gun. The scope of this investigation is to design a nailer which can be applied all construction materials whose UCS range from 1-100 MPa. In the research, rocks, bricks, and concretes prepared in different cement/sand ratios with different strength ranges were used as materials. The unconfined compressive strength of the materials used in the experiments was first determined by conventional compression tests. The nail penetration depths were determined by conducting experiments on the same materials using a nailer with two different energy levels. An empirical relationship was developed by using nail penetration depths, driving energies, and nail diameters as the independent variables and the UCS determined by the conventional method as the dependent variable. According to the empirical relationship determined by multiple regression analysis, the UCS of building materials can be estimated with significance level of 99% by the nail penetration method. The research also revealed that the UCS of rocks might have a coefficient of variation as high as 30%.
Keywords:
Compressive strength, building materials, nail gun, driving energy.