Geothermal energy is a natural resource that can be utilized directly or by converting to other types of energy. Considering the diversity of the geological structure of Türkiye, the geothermal systems have developed depending on young tectonic and volcanic active rock. Western and Central Anatolia are especially rich in geothermal resources. The geothermal well with the hottest wellbottom temperature was drilled in Central Anatolia, and the well-bottom temperature was measured as 341°C at a depth of 3845 meters. In 2022, Türkiye’s electricity generation capacity and the total installed direct heat use reached 1663 MWe and 5113 MWt, respectively. Considering Anatolia’s Curie depth and heat flux, the probable thickness of the batholith can be regarded as 10 km. For example, the total granitoid area of Western Anatolia is 4221 km2 and at least 2% of this granitoid can provide approximately 8x107 MWh of electricity by Enhanced Deep Geothermal Systems (EDGS). When all granites in Türkiye are considered, it is expected that the future capacity of Türkiye will be much higher with drilling research and development studies and the discovery of new fields. This capacity will exceed 100.000 MWt levels in the medium term, especially with the addition of EDGSs.
Latest Pliocene-Quaternary uplift of the central Tauride and Evolutionary history of the Kızıllar Canyon, southern central Anatolia-Türkiye
Authors:
Ali KOÇYİĞİT, Uğur DOĞAN
ABSTRACT
The study area is located near the apex of the north-facing and V-shaped Konya-Niğde Graben. Its south-southeast margin is defined and controlled by the NE-trending Karaman-Niğde Fault Zone. It also forms the geographic boundary between the central Tauride in the south and central Anatolia in the north. This study aimed to determine the Latest Pliocene-Quaternary uplift rate of the central Tauride and the evolutionary history of the Kızıllar Canyon located on the uplifting southern footwall block of the Karaman Niğde Fault Zone. Both the geological and geomorphological field data, which were obtained within the framework of this study, revealed the following: (1) the Kızıllar River drainage system developed as a result of several capture events; (2) Lithological and hydrological characteristics of the valley reveal the reason for the lack of gradation in the river’s longitudinal profile; (3) the Kızıllar Canyon reflects the incision process of the Kızıllar River; (4) the Kızıllar River cut vertically into its bed up to 230 m, which corresponds to the minimum Latest Pliocene- Quaternary uplift rate of the central Tauride (~0.06 mm/yr); and (5) the Kızıllar Canyon developed as a natural response of the river to the uplift of the Konya-Niğde Fault Zone footwall block.
Keywords:
Kızıllar Canyon, Central Taurides, Central Anatolia, Fault, Uplift Rate
Modeling the discharge of Kapuzbaşı spring for parameterization of the karst aquifer, Aladağ Mountains, Central Taurus, Türkiye
Authors:
Süleyman Selim ÇALLI
ABSTRACT
Kapuzbaşı karst spring is located between Kayseri and Adana, one of the most important and wellstudied mountainous karst regions, Aladağlar, Central Taurus, Türkiye. Previous scientific studies revealed the hydrogeological setup, perceptual model including groundwater residence time and potential recharge-discharge relationship; however, there has not been any process-based conceptual
modeling experiment on the karst spring aiming to parameterize the karst system hydrodynamics. In the present study, we aimed to develop a numerical model of the karst groundwater system to parameterize the system hydrodynamics, which was built based on the conceptual understanding of the karst hydrogeology. We selected the lumped-conceptual hydrological model of KarstMod to quantify the discharge of the Kapuzbaşı spring. The modeling experiment showed that the recharge area of the karst spring is covering approximately 350 km2, and the approximate annual discharge exceeds 250 hm3. The preferential flow mechanism triggered after the water level in epikarst exceeding 92 mm, and the melt factor is approximated as 9.91 mm/°C/day. The response time of conduit reservoir is approximately 1 day, and the loss flux triggered when the water level in conduit reservoir exceeding 4 mm. The hydraulic conductivity of the matrix reservoir is found approx. 0.012 mm/day. The model performance based on the daily discharge was obtained as Nash Sutcliffe Efficiency (NSE) = 0.77, and Kling-Gupta Efficiency (KGE) = 0.87 in the calibration, and NSE = 0.76, and KGE = 0.77 for the validation periods, respectively. Eliminating the less sensitive model parameters in the calibration leads to more robust and less uncertain discharge simulations.
Keywords:
Kapuzbaşı Karst Spring, Aladağ Mountains, Hydrological Model, KarstMod, Central Taurus
A thorough comparison of newly discovered whetstone from the Dazkırı (Afyonkarahisar – Türkiye) with a heritage whetstone from the Cretan Island-Greece with regards to mineralogical, petrographic and physico-mechanical characteristics
Authors:
Osman Serkan ANGI, Orhan YAVUZ, Emin ÇİFTÇİ
ABSTRACT
The present study is an analytical investigation into the geomaterial and engineering geological characteristics of Cretan (Greece) and Dazkırı (Afyonkarahisar, Türkiye) whetstones. The Cretan whetstone, a prominent example of a heritage natural whetstone, is a distinctive type of carbonatecemented siltstone that is extracted from the island of Crete in Greece. Conversely, a new specimen was recently identified by the authors and designated as “the Dazkırı whetstone,” which exhibits comparable lithology and is extracted in the Dazkırı district of Afyonkarahisar (Türkiye). In order to ascertain the geomaterial characteristics of the studied whetstones, a number of analytical and test techniques were utilized. Furthermore, Cerchar Abrasivity Index (CAI) measurements were conducted and acquired. The CAI results were then compared through the use of regression equations related to quartz content, cementation degree, and the Böhme surface abrasion resistance. The oil absorption test was finally conducted to ascertain the grinding-honing performances and impregnation capacity with lubricant of the examined whetstones. Consequently, a comparative analysis of the subject whetstones was conducted, resulting in the definition and classification of their characteristics. These characteristics included the relationship between grain size and grit size equivalent, as well as the type of lubricant, function, and uses. In summary, the Dazkırı whetstone exhibits superior geomaterial characteristics and grinding-honing performance when compared to the Cretan whetstone.
Keywords:
Whetstone, The Cretan Whetstone, The Dazkırı Whetstone, Geomaterial Characteristics, Grinding- Honing Performances.
Integration of structural, hydrogeological and thermal remote sensing data for the determination of geothermal capacity: Edremit (Balıkesir) Basin as a case study
Basins formed on active strike-slip faults are important prospect areas for geothermal energy exploration since the crust gets thinner in these areas and tectonic structures provide favorable conditions for heat-fluid circulation and transportation. The objective of the recent study is to evaluatethe geothermal capacity of the Edremit Basin utilizing tectonic, geological, and hydrogeological studies, combining remote sensing (land surface temperature-LST, hydrothermal alteration, and multi-temporal InSAR (MT-InSAR) assessments). We present structural literature data and the results of field mapping, which revealed the geometry, kinematics, and dynamics of structural features, geological units as geothermal system components, thermal and cold water chemistry, and thermal infrared remote sensing analysis. For the purpose of assessing new targets and recent geothermal capacity, these data are combined and evaluated. According to the outcomes of the study, the fault pattern in the Edremit Basin is generated by N-S extension, which produced E-W dominant striking normal faults with a heritage of paleostructures oriented in various directions. According to remote sensing analyses, the primary LST regions in the basin are defined by the active faults. Therefore, a high sodium sulfate ratio recorded in the chemical analyses of the water samples indicates a deep circulation and high possibility for the presence of thermal water. Consequently, our findings are consistent with the work to include thorough field geology surveys, structural patterns, LST, and water chemistry to refined exploration process. All these results indicated that Edremit (Balıkesir) Basin holds a great promise for the discovery of new geothermal energy sources.
Keywords:
Geothermal, Remote Sensing and GIS, Tectonic, Hydrogeology, Edremit (Balıkesir) Basin.
Comparative analysis of water and carbon dioxide injection for the thermohydraulics of an EGS project in Dikili Geothermal Field, Türkiye
Authors:
Ali Cemal BENİM, Aydın ÇİÇEK
ABSTRACT
A comparative numerical analysis of the thermohydraulics of an enhanced geothermal system (EGS) project in Türkiye in Dikili area is presented. The fractured granodiorite is modelled as porous media, utilizing the numerically suggested data of other authors for the corresponding hydraulic characteristics. As the heat transmission fluid, two different mediums are alternatively considered. These are the more classical medium, water and the supercritical carbon dioxide (sCO2). Transient calculations are performed for a time period of twenty years, comparing the temporally developing results obtained for water and sCO2 with each other. Based on modeling parameters and assumptions, higher production temperatures are observed with sCO2, in comparison to water, implying an advantage for sCO2 usage as a working fluid in EGS. This is accompanied by the further advantage of a lower pressure drop for sCO2. On the other hand, the temperature advantage is relativized by the lower specific heat capacity of sCO2 causing a decrease in the production thermal power. In general, the present results are found to be encouraging for a further and more detailed analysis of the employment of sCO2 as working fluid in EGS.
Geothermal researches, Hot-Dry Rock · Volume 171 / August 2023 · Pages: 107-122
Naci GÖRÜR, Şebnem ÖNDER
Indexed In · Volume 171 / August 2023
Neotectonics of Türkiye and its geothermal implication
Authors:
Naci GÖRÜR, Şebnem ÖNDER
ABSTRACT
Favorable conditions for geothermal energy were created in Türkiye during its neotectonic episode from Neogene to Quaternary. This episode is characterized mainly by fluvio-lacustrine sedimentation and strike-slip tectonics with associated magmatism. Under these conditions, a great number of geothermal areas have formed in the neotectonics provinces in association with major tectonic features, including the North and East Anatolian Fault Zones (NAFZ and EAFZ, respectively). Today, the geothermal resources of Türkiye are mainly located in the West Anatolian Extensional Province associated with the graben systems. However, the Central Anatolian Ova Neotectonic Province is considered one of the most promising geothermal targets which are characterized by the presence of widespread hot dry rock systems. This study mainly aims to throw light on the possible potentiality of these resources at Kırşehir Block by emphasizing the neotectonic evolution of the country.
Keywords:
Neotectonics, Geothermal Springs, Neotectonic Provinces, Hot-Dry Rock, Temperature Map