Hot spring waters are rich in terms of minerals. Since there are dramatic changes in thermodynamic parameters in geothermal power plants, such as a decrease in temperature and pressure, severe precipitation occurs throughout the system components in an uncontrolled manner. There are three main chemistries in deposits: carbonates (mainly calcium carbonates), silicates (metal silicates), and sulphides (antimony sulphide-stibnite). Energy harvesting is remarkably reduced out of the insulating nature of the deposit. Various actions need to be taken to mitigate this undesirable issue of scaling in geothermal systems. Geothermal systems are in fact quite complex, and the composition of brine and, accordingly, the chemistry of the deposit are not identical. Therefore, each system should be studied individually, and a tailor-made remedy should be developed. In this overview, the types of deposits in terms of chemistry and the actions (pH modification or antiscalant dosing) that
should be taken to reduce scaling are mentioned, and potential chemistries of antiscalants are given.
Formation of carbonate-hosted Kızılüzüm Pb–Zn–Ag deposit within the Bornova Flysch Zone, İzmir, Western Türkiye
Authors:
Bezhan BEHZAD, Cem KASAPÇI, Nurullah HANİLÇİ
ABSTRACT
The Kızılüzüm Pb-Zn-Ag deposit is hosted within carbonate rocks belonging to the Bornova Flysch Zone (BFZ) in Western Anatolia. The base of the BFZ in the study area comprises Upper Cretaceous recrystallized dolomitic limestones with rudist fossils, overlain by Late Cretaceous-Paleocene flysch-type sequences consisting predominantly of fossil-free sandstone and shale alternations, along with occasional limestone lenses. Cataclastic granitic dike, possibly of Miocene (?) age, intrudes these units. The BFZ exhibits an imbricated internal structure, and the Kızılüzüm Pb-Zn- Ag mineralization has developed within the recrystallized dolomitic limestones particularly at the intersections of low-angle thrust zones and faults. The ore zone is oxidized and contains 0.4-44% Zn, 0.2-12.5% Pb, 65-3305 ppm As, and 1.5-347 ppm Ag. The moderately strong correlation of Ag with Pb and sulfur (r = 0.7) suggests its association with galena. Fluid inclusions yield an average homogenization temperature of 238 °C (Th) and 5.4 wt.% NaCl equivalent salinity, indicating a dominantly magmatic-hydrothermal origin for the ore-forming fluids. δ34S for sulfide minerals average -6.89‰ (range: -11.95‰ to 4.46‰; n = 27), while barite shows 8.75‰ (range: 0.67‰ to 14.05‰; n = 5). These data suggest that sulfur may have been derived from dominantly magmatic sulfate sources with partly sedimentary sulfate contribution, reduced and fractionated through thermochemical sulfate reduction (TSR) processes. Considering its geological setting, mineral paragenesis, fluid inclusion data, sulfur isotope compositions, and ore geochemistry, the Kızılüzüm Pb-Zn-Ag mineralization may have been formed through the mixing of magmatic-hydrothermal fluids derived from Oligocene-Miocene magmatic rocks intruded into the Bornova Flysch Zone (BFZ) and shows similarities to Carbonate Replacement Deposit (CRD)-type Pb-Zn deposits worldwide.
Geochronology, Metallic mineral deposits · Volume 178 / December 2025 · Pages: 33-52
Serdar KESKİN, Taner ÜNLÜ
Indexed In · Volume 178 / December 2025
(U-Th)/He geochronology of supergene iron ores from Attepe, Eastern Taurides, Türkiye: Evidence for Early Pleistocene aridification
Authors:
Serdar KESKİN, Taner ÜNLÜ
ABSTRACT
The Taurus Mountains form the southern boundary of the Central Anatolian Plateau in Türkiye and represent part of the broader Himalayan-Tibetan orogenic system. Today, they act as a climatic divide, separating the dry, semi-arid interior in the north from the more temperate Mediterranean climate in the south. However, their formation history and climatic impacts remain unclear. In this study, we apply multiple aliquot (U-Th)/He dating to supergene iron-oxide phases from the Attepe iron deposits in the Eastern Taurides to investigate Cenozoic climatic conditions. The ages obtained from four deposits range from ~5.2 to 0.95 Ma, indicating sustained hot and humid conditions conductive to supergene mineralization during the Plio-Pleistocene. The observed decrease in age with depth, reflect a progressive deepening of the weathering front at rates of 6.4 to 18 meters per million years between 5 and 1 Ma. The preservation of supergene iron minerals formed during a stable, warm, and humid period between the late Miocene and Middle Pliocene means the absence of rapid uplift or erosion within the past million years. Instead, the youngest goethite around 0.95 Ma supports the hypothesis that regional climate change, rather than tectonic uplift, was the primary factor of increasing aridity around ~1 Ma.
Keywords:
Attepe, U-Th/He, Uplift, Iron Deposit, Aridification.
The Jebel El Onk region presents a complex geological history, starting with Maastrichtian limestones. Early Paleocene subsidence intensified, leading to the deposition of thick marly horizons and black marl shales during the early Thanetian. This was followed by the formation of a significant phosphate sequence during the late Thanetian to early Ypresian, comprising interbedded marls, phosphorites, and dolomites, and concluding with lagoonal gypsum marls and phosphate-rich clays, subsequently overlain by Miocene sediments. This study focuses on the Jebel-Onk phosphate deposit, with a particular emphasis on characterizing diverse phosphate facies and assessing their implications for resource management. Using X-ray Diffraction analysis, the apatite group minerals and associated rock components from the Djemi-Djema-East deposit were identified. To further elucidate the deposit’s morphology and surrounding lithology, the study integrated geochemical data and lithological succession derived from core drilling. An automatic mapping of the Paleo-Eocene stratiform phosphate body highlighted spatial irregularities in thickness and established correlations with the supra-layer cover, consisting of Ypresian and Lutetian flint limestones and Miocene sands. Chemical element analysis revealed content variations between the two dominant phosphate types, beige and dark gray, with isotener maps illustrating geochemical heterogeneities within the phosphate layer. Bi-variable statistical analyses provided additional insights, demonstrating strong positive correlations between P2O5, CaO, and SiO2, while MgO showed a negative correlation. Principal Component Analysis (PCA) further identified three distinct geochemical associations, corresponding to the phosphate material, the organic and dolomitic matrix, and the clay material. These findings offer valuable insights for optimizing selective phosphate exploitation. By identifying spatial thickness variations, geochemical properties, and facies transitions, the study enables precise targeting of high-grade zones, reduces waste, and supports strategic planning for sustainable resource management at the Djemi-Djema Est deposit.
Integration of structural, hydrogeological and thermal remote sensing data for the determination of geothermal capacity: Edremit (Balıkesir) Basin as a case study
Basins formed on active strike-slip faults are important prospect areas for geothermal energy exploration since the crust gets thinner in these areas and tectonic structures provide favorable conditions for heat-fluid circulation and transportation. The objective of the recent study is to evaluatethe geothermal capacity of the Edremit Basin utilizing tectonic, geological, and hydrogeological studies, combining remote sensing (land surface temperature-LST, hydrothermal alteration, and multi-temporal InSAR (MT-InSAR) assessments). We present structural literature data and the results of field mapping, which revealed the geometry, kinematics, and dynamics of structural features, geological units as geothermal system components, thermal and cold water chemistry, and thermal infrared remote sensing analysis. For the purpose of assessing new targets and recent geothermal capacity, these data are combined and evaluated. According to the outcomes of the study, the fault pattern in the Edremit Basin is generated by N-S extension, which produced E-W dominant striking normal faults with a heritage of paleostructures oriented in various directions. According to remote sensing analyses, the primary LST regions in the basin are defined by the active faults. Therefore, a high sodium sulfate ratio recorded in the chemical analyses of the water samples indicates a deep circulation and high possibility for the presence of thermal water. Consequently, our findings are consistent with the work to include thorough field geology surveys, structural patterns, LST, and water chemistry to refined exploration process. All these results indicated that Edremit (Balıkesir) Basin holds a great promise for the discovery of new geothermal energy sources.
Keywords:
Geothermal, Remote Sensing and GIS, Tectonic, Hydrogeology, Edremit (Balıkesir) Basin.
Impact of thermal water on environment: case study of Mila and Guelma region, Algeria
Authors:
Rima KIFOUCHE, Foued BOUAICHA, Oualid BOUTERAA
ABSTRACT
A hydrochemical characterization of the waters of the study region (North-East Algeria) was carried out following samples taken at 36 thermal springs and their effluents during May 2022. The analysis of the waters allowed to establish the chemical facies and their classification according to the Stuyfzand’s method and to deduce the aptitude of these waters for irrigation and the risks of salinity. The results revealed physico-chemical characteristics, relatively, variable. Q-mode cluster analysis was applied to the thermal water, generated four (4) groups clusters. Group1 represent a group of waters with low salinity dominated by Na-HCO3; Stuyfzand’s classification indicated that the waters are fresh-brackish with moderate to moderately high alkalinity. Taking into account the classification of Richards; we were able to identify the presence of the C3S1 class for the majority of the stations. The C3S1 class designates waters that can be used without any particular control for the irrigation of crops that are moderately tolerant to salts. These waters have average EC values of 3,616.3 μS/cm allowing their use in a less restrictive way for irrigation. Potential environmental effluents from the thermal spas could pollute both irrigation and drinking water, which represents a danger to the health of the region’s inhabitants.
Importance of reinjection in sustainability of geothermal resources and reinjection well locations in Türkiye
Authors:
Nilgün DOĞDU, Oktay ÇELMEN
ABSTRACT
Sustainability of geothermal energy is related with the type of geothermal resources (natural springs, well), usage situations (thermal, residential-greenhouse heating, energy, etc.), amount of use (optimal flow, appropriate pressure-temperature changes), conservation of resources, and is mostly achieved by reinjection of the geothermal fluid returning from usage. It is important to take measures to prevent adverse changes in temperature and pressure conditions in the reservoir to properly remove the fluid returning from use in geothermal areas from the environment and recharge the reservoir. Reinjection should be carried out under appropriate conditions for the protection of resources. In the operation of geothermal resources, reinjection/discharge conditions and obligations are also specified in the provisions of the Law No. 5686 and the implementing regulation. Various studies within the scope of exploration activities in geothermal fields, determining the productionreinjection areas and determination the location of the reinjection wells in conditions that will not adversely affect the production pressure-temperature conditions are of great importance for the sustainability of the geothermal reservoir.